Jump to content
SAU Community

Recommended Posts

I removed all my tint many months ago now... I miss it... but it's awesome being able to see at night!

So glad to be rid of the horribly scratched blue crud...

Also, dear son of rajab... removing it from the rear window with windex and glad wrap on the inside...then a heat gun on the outside of the glass to boil the windex against the tint...

If you've never been high on windex before, good. I don't recommend it!

I was considering being lazy enough to just remove all the glass out of the doors of my old car and put it back into the new car, so I didn't have to worry about getting tinted windows.

Unsure if this actually constitutes being lazy, though....

I have 20% all round and factory headlights... Driving at night is fine

I'm a man though

factory headlights are better... the HID's just light up a narrow column in front of the car... kinda like a tunnel

I'm having a hard time finding a light bronze tint. Or any bronze tint for that matter. Emailed a mob who distributes some of the better brand of tint and they told me they can only get the charcoal, black and clear products in Aus :(

I believe it's the latter. There's no regulation on coloured tint, just can't be mirror finish. I did find a local manufacturer who do bronze tints in 70%, 50% & 35% before I was making serious enquiries and now I can't find them :/

Steer clear the finance company will not tell you the payout figure and you run a risk of the seller not paying the finance.. by law the bike can be repossessed without any question

The amount of cars I have had repossessed from a third party is actually quite surprising

Edit: if you pay the purchasing amount to the finance company and it doesn't cover the outstanding they will still repo

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...