Jump to content
SAU Community

Recommended Posts

But will you like the increased guy attention

Increased nobody attention moar liek.

Occasional glance/thumbs up from another turbo subi owner otherwise pretty much nobody looks at it. Really is a WRX in grandads jumper and it's so good. Pulled over driving it once on my P's and cop let me off with nothing even though I could've lost my license. Been through 2 breathos and even with a loud exhaust just go through like anybody else. Less police attention than the quiet as a mouse bog stock NA 4 door skyline. Less joe average attention too.

turbo subarus before they were cool.

ive never seen anyone thumbs-up any other car ever before. actually, except when someone on a bike thumbs-up when i was in an exige.

all i ever see is this:

kermit-car-300x225.jpg

or

Mr_Bean_420-420x0.jpg

The car I've seen the most thumbs up while travelling in has been either of my dad's Cobra replicas

They seem to be universally appreciated by all kinds of people of all ages and people love making it known to you

Second was a mint condition HT Monaro GTS with a 427 that I took for a test drive...bogans were hanging out of their cars for that one

What do i need to 200awkw it?

If it's an original RS engine afaik the heads don't flow all that well soonly capable of ~180kw atw.

Plenty of em had the noisy lifter recall(Which only happened if people complained) where they stuck early WRX heads & pistons. Those or anything else shouldn't need much. Fairly usual stuff, TD05-Big 16G/18G/VF23/VF22/VF34 etc, fuel pump, injectors, 3" turbo back, tune, maybe an fmic.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...