Jump to content
SAU Community

Fs: Cruise Controls For M35 & V35 - Diy Install

Commsman
 Share

Recommended Posts

Commsman Veteran

Commsman

Posted
Posted

Hi everyone

I have a limited number of cruise control systems for sale. They come with the factory switches for your steering wheel & these have LEDs so you can see what the button function is in the dark.

It will take a couple of hours to install & the details are documented. You only need to connect 4 wires (12V, brake x 2 & speed sensor) to get it working, plus the dash light input (from cig lighter) if you want the switches to light up.

You also get the stalk control which you use to program the unit to work on the factory controls & you can even configure it for various levels of responsiveness (tip - leave in factory settings to start with).

The audio controls come in the same harness so if you have the factory sound system then it will just work.

Cost is $490 delivered for the whole kit - an absolute bargain since these ones are typically $900 installed without the steering wheel switches.

PM me for more details.

Cheers, Leon.

post-76144-0-53643400-1322356065_thumb.jpg

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Commsman
Commsman

Lost my contact due to a computer crash a while ago, but I'm getting somewhere finally. Should have more news after my new buyer emails back to confirm prices. Thanks for your patience.

Serious
Serious

Looking for cruise control for V35 Skyline Coupe

Daleo
Daleo

It a massive shame my sister is now back in Aus after several years in Shanghai & Hong Kong... I could possibly see if something can be done.

Posted Images

  • 2 weeks later...
nickcorr Proficient

nickcorr

Posted
Posted

Hi Leon

Do these only work with the factory buttons?

I have the Momo steering wheel, so this means that the OEM buttons do not fit... Does it come with a stack or button controller as well?

Nick

bigkevracer Grand Master

bigkevracer

Posted
Posted

Hey Nick. Leon supplies the stalk too (which you need temporarily to program it). I think there's someone over in the other forums who has fitted the stalk because they had a Momo wheel.

This should also make it cheaper because you won't need the OEM buttons.

Hope that helps!

iamhe77 Grand Master

iamhe77

Posted
Posted

Some reading for you Nick

http://m35stagea.info/forum/viewtopic.php?f=24&t=245&start=30

It would seem that my PNM35 has the same cruise control... or at least the same stick to control it.

Commsman Veteran

Commsman

Posted
  • Author
Posted

Hi Nick, what was said above is entirely true.

However, I assumed that most people would want the steering wheel controls so ordered only one less set of controls than I had units to sell. Murphy's Law dictated that the first person to buy one had the Momo wheel & hence didn't require the Nissan controls. That means that I need to include the wheel switches with every cruise control or else I will be left with spares.

So I'd rather not sell the CC without the switches at this stage. There's enough interest by the looks of it to have them spoken for by early in the new year.

Commsman Veteran

Commsman

Posted
  • Author
Posted

It would seem that my PNM35 has the same cruise control... or at least the same stick to control it.

It's a popular cruise control, so I wouldn't be surprised if it was fited a/m to your car. Maybe you could integrate Nick's factory buttons to yours, lol.

Daleo Grand Master

Daleo

Posted
Posted

It's a popular cruise control, so I wouldn't be surprised if it was fited a/m to your car. Maybe you could integrate Nick's factory buttons to yours, lol.

And swap you column shroud...

nickcorr Proficient

nickcorr

Posted
Posted

Hi Nick, what was said above is entirely true.

However, I assumed that most people would want the steering wheel controls so ordered only one less set of controls than I had units to sell. Murphy's Law dictated that the first person to buy one had the Momo wheel & hence didn't require the Nissan controls. That means that I need to include the wheel switches with every cruise control or else I will be left with spares.

So I'd rather not sell the CC without the switches at this stage. There's enough interest by the looks of it to have them spoken for by early in the new year.

Hi Leon,

So how do I get a set?

Nick

ainix Newbie

ainix

Posted
Posted

installed cruise control on this Christmas holiday. Awesome. but, I prefer to use stalk control rather than OEM wheel button. coz, it has more function. ^^ Thank you, Leon

nickcorr Proficient

nickcorr

Posted
Posted (edited)

PM sent (awesome one :) )

Thanks Leon,

Arrived in the post today... Hope to get it fitted over the weekend...

Anyone know someone looking for a set of audio or cruise steering wheel controls... :thumbsup:

Edited by nickcorr
iamhe77 Grand Master

iamhe77

Posted
Posted

Thanks Leon,

Arrived in the post today... Hope to get it fitted over the weekend...

Anyone know someone looking for a set of audio or cruise steering wheel controls... :thumbsup:

Yes. If you can wait until receive mine, I'll also swap the fascia so you done have to cut (and mine won't have the hole)... if you want... and Jules pulls out.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Leon, may have some cash for you this week. :thumbsup: Can you please send your details through?

Dont know if I want the controls either if anyone is chasing some. May just use the stalk I think.

Commsman Veteran

Commsman

Posted
  • Author
Posted

installed cruise control on this Christmas holiday. Awesome. but, I prefer to use stalk control rather than OEM wheel button. coz, it has more function. ^^ Thank you, Leon

My pleasure mate. Glad you're happy.

Re extra functions available with the stalk, - all you get is a toggle switch on the end which allows 2 preset speeds. The same can be achieved by putting a 2 position toggle in the dash & wiring it in where the steering wheel switches connect. The main unit reads a different resistance for preset 1 & 2, in exactly the same way it knows what button on the wheel was pushed.

The only benefit of stalk over buttons would be the small amount of time saved by not pulling the steering wheel off & wiring/plugging it in. I'd take the tactile feel & factory look of the buttons any day, but that's just me :geek: .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...