Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Just wanted to say a big thanks to @ob1, @r34.bryan & @Gazzaa

Ended up going with some Rota's. Really happy with the result. Thanks to your kind replies and info they fit perfectly. No scrubbing or guard rolling and car is lowered. Looks 100% better.

For any other budding R34 Gtt drivers out there, this is what I went with.

F: 18 x 8.5 +30 - 235/40R18

R: 18 x 9.5 +35 - 255/35R18

 

4 v1.jpg

  • Like 2
  • 2 months later...

R34 with Rota D2-EX in 18x9.5+18 all round.

tyres - 235/45 all round.

Fit perfect. Has BC BR coilovers set to fairly stiff. Slight rubbing on front inner plastic guard at full lock. And only rubs on the rear slightly if I hit a huge dip in the road at speed. Will probably give the rear guards a slight roll and lower more in the back.

5B3A2C87-7F15-4C5E-9CE0-957BD9FA6189.jpeg

214B3063-78F5-4637-8CB7-C1586A20E6A9.jpeg

B423AA99-41F7-470E-B4B7-667D11EDAC94.jpeg

E7FE73B1-CD06-4C0A-8FF9-2D64BB6FD107.jpeg

4AA179DA-9411-4BCA-9577-E7BBC6BCCADA.jpeg

2095222F-59D6-4EC1-A920-AF52D5B712E8.jpeg

  • 2 weeks later...
On 07/04/2020 at 3:49 PM, r34.bryan said:

Hi, does anyone know if a 18x9.5 +22 265/35 square setup will fit a r34 gtt coupe?

I'm looking for a set of SSR GTX01 and I would like to run this size for the concave look. I don't like streched tires so thats why i chose 265/35 on a 9.5j

Hope anyone can help me.

Thanks!

Supposedly a 18x9.5 +22 will be flush fitment. I just can’t seem to figure out whether 255/35 or 235/40 is the move on tyres.

I’m hoping someone can enlighten me on that.

  • 2 months later...
On 11/28/2020 at 3:32 AM, Us3rNaMeD said:

Supposedly a 18x9.5 +22 will be flush fitment. I just can’t seem to figure out whether 255/35 or 235/40 is the move on tyres.

I’m hoping someone can enlighten me on that.

I'm figuring out my setup at the moment - alignment isn't for another 5 weeks.

For the front I'm running TE37s in 18x9.5 +22. Camber arms are Cusco and they're set at the max negative setting, which is -2.2 according to the manual, but are likely around -3 with the drop. 

Front tires are 235/40 Hankook V12 Evo 2s which I'm using for getting the sizes right. 

Arches are rolled flat and pulled very slightly. As you can see, there was probably no need to do this.

I'm contemplating getting 255/35s up front and dialing the camber back to -1.35 (as per the manual) but it will be tight. I am currently hitting the fender liners at full lock.

Sorry the pic is portrait, I took this to send on my phone.

 

S__16236575-c.jpg

Dialled the front camber back to 1.35 degrees (as per the cusco manual), it's probably around 2.5 degrees with the drop. Rear camber is unknown at the moment. 

Wheels: TE37 SL 9.5J, +22/ 10J +10

Tires: Hankook V12 Ventus Evo2 235/40/18 front and 255/40/18 rear

Fenders rolled flat. 

IMG-9433-1.thumb.jpg.149c616bd66f42611bf3264b3d7253bc.jpg

IMG-9435-1.jpg

  • Like 1

Thankyou for that last update, I went measuring based off your previous post (cause it looks great) and I was thinking the differential between the fronts and rears was a bit weird for it to fit so nicely.

Looks awesome dude

  • Like 1
7 hours ago, Kinkstaah said:

Thankyou for that last update, I went measuring based off your previous post (cause it looks great) and I was thinking the differential between the fronts and rears was a bit weird for it to fit so nicely.

Looks awesome dude

No worries, cheers for the appreciation.

I should probably note that the rears are hitting the bumper tabs under high compression - happened a few times on the highway. I think the toe is out quite a bit (toe in) - just from eyeballing it. The 255/40s were the fronts off my Z, they're not ideal but they fill the gap well. I'm undecided of where to go from here, possibly 265/35 rear and 255/35 front when i upgrade (hankook V12s are sh*te).

The fronts are scrubbing the liners on full lock and again under compression. I'm gonna heat them up and try to push them back, possibly try and push the fronts up with the arch roller, then I've got some weather stripping to seal the newly-formed gap between the liner and the fender.

  • 1 month later...

Did anyone manage to fit a 18 inch 275 in the back without stretching the tyre? Chasing the Performance here, so a meaty tyre is desired.

As i'm reading 255s are scrubbing the liners in the front, anyone fitted 245s? Since any visible scrubbing on the liners will get your car immediately impounded here and they check that in EVERY police control 😕

You can put huge tyres on the back with custom wheels, there's a ton of room on the inside of the R34 rear to pick up some seriously large rubber. I think I measured I had something like 40mm extra room to play with when I stuck my head under there and measured. (and I have 275's back there already)

Would need a rim with a custom offset to make use of this though.

Fronts you can run 255 without scrubbing. I run 265's up the front (265/35/18) and didn't have any scrubbing until I took it to the race track. Even then if I got creative with a heat gun I could have moulded it further away/clippied it closer to the body if I had've cared a great deal.

(I care a little deal)

Funny enough if you have wide enough guards a 285/30/18 (or 295!) will avoid liners better than a 275/35/18. But that's future talk.

  • Like 1

Is there actually no one that uses the performance of their Cars? Barely getting any information out of this thread... Seems like people love putting 235 tyres on a 18x9.5 Rim... (My GFs Mini Cooper has bigger tyres btw.)

Trying to figure out which size and offset i should order my Volk Ce28n in is a nightmare, since i currently only got 255 in the back and they can't hold the power on a mountain road. Should fit beefy Toyo R888R but can't have any rubbing or scrubbing under any circumstances, full lock steering in a circle 5x at 40 km/h will be tested, else the Car gets impounded.

Got my new wheels and tires!

Wheels: Work Emotion ZR10 (front: 18x8.5J +32 rear: 18x9.5J +30)

Tires: Toyo Proxes R888R (front: 245/40 rear: 265/35)

Car: 1998 R34 GT-T coupe with stock fenders, lowered on coilovers.

Camber: front: -2.2° rear: -2.5° I will reduce camber on the rear to about -1° or -1.5° soon.

I hope this can help someone. Fitment is perfect I would say.

Thanks to everyone on this thread for your info, experiences and helping me choose the right sizes.

For those interested in my built, follow me on Instagram @r34.bryan 🤙

20210313_163117.jpg

20210313_163730.jpg

20210313_163721.jpg

Edited by r34.bryan
  • Like 1
  • 3 months later...

I recently just changed the tire setup on my car. As mentioned, the previous setup was for trial purposes and I really wasn't a fan. The rear profile was just too large and it kept clipping the bumper tabs.

I'm now running Accelera 651 Sports in 255/35 18 front and 265/35 18 rear. It's clipping the liner in the front under lock but as @Kinkstaah mentioned, you can push them back with a heat gun.

Wheel specs are the same: Volk TE37SL 9.5 +22 and 10 +20 rear. If I were buying these again (I orginally bought them for my Z33), I would likely get 9.5 +22 all round.

Camber is -3 front, -2.4 rear. 

IMG-0254-1.jpg

IMG-0250-1.jpg

IMG-0244-1.jpg

  • Like 1
  • 3 weeks later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...