Jump to content
SAU Community

Recommended Posts

So I have slapped on some hard compund Hankook Ventus TD Z221 for Phillip Island. I also have a set of 295/35/18 AO50s but think I am in for all sorts of trouble to get them to fit my car.

Has anyone fitted the 295 AO50s onto a 9.5" rim ? Or do they really need a 10" rim?

  • 2 weeks later...

Looking for semis for my GTR. Essentially want something that is going to last a few track days but won't take forever to heat up. Also, the cheaper the better :)

I have yet to buy rims yet but I was looking at 18x10, so would 265/35 be the best profile? I am not finding many semis in that size. Should I look at other rim/tyre width combinations?

Need to fit V8 supercar alcons underneath.

Cheers

Looking for semis for my GTR. Essentially want something that is going to last a few track days but won't take forever to heat up. Also, the cheaper the better :)

I have yet to buy rims yet but I was looking at 18x10, so would 265/35 be the best profile? I am not finding many semis in that size. Should I look at other rim/tyre width combinations?

Need to fit V8 supercar alcons underneath.

Cheers

I'm in the same boat as you except my rims are 18x9.5. I've found a fair few tyres that would be fine but I can't afford them at the moment so I just started snapping up the used 265/35/18's off ebay.

I'm in the same boat as you except my rims are 18x9.5. I've found a fair few tyres that would be fine but I can't afford them at the moment so I just started snapping up the used 265/35/18's off ebay.

I might start off with that as I don't think I'll be getting the full potential of new semis just yet. How do you find the used tyres? What do you look for when buying them?

Ahem - surprised no one has snapped these up yet:

http://www.skylinesaustralia.com/forums/topic/423228-syd-28530-18-dunlop-dz03g-sparco-slalom-sl-3-racing-boot/

And I have 295 30 18 A050's on 18 x 10's. Seem just fine and fit under the guards of my 33 GTR - hint hint Fatz.

I have 245/35 on my 18x9.5's at them moment and they are stretched hence the step up to 265's.

I just put 265 18 into ebay or semi slick and see what comes up. I picked some up earlier this week and now i'm just waiting till some more come up at a decent price.

No clearance or rubbing issues with 295's Eric?


I have a brand new set of R888's at home in 265/35/18 but am considering snapping up a set of 295's I have access to instead, and was wondering how they would be on an 18 x 10.5 rim.

Ahem - surprised no one has snapped these up yet:

http://www.skylinesaustralia.com/forums/topic/423228-syd-28530-18-dunlop-dz03g-sparco-slalom-sl-3-racing-boot/

And I have 295 30 18 A050's on 18 x 10's. Seem just fine and fit under the guards of my 33 GTR - hint hint Fatz.

  • 2 months later...

Need your opinions guys...for the same money...would you choose:

1) Toyo R888s 275/40/17

or

2) Hankook Z221 255/40/17

Tyres are going on 17x9.5" rims front and rear...are the Toyos really as bad as people make them out to be?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...