Jump to content
SAU Community

Recommended Posts

Hi all!

I'm running out of spark with my RB25DET S2.

I have fresh sparkplugs and the coilpacks seems externally undamaged.

Anyway, now I'm planning on updating the coilpacks.

There's a bunch of different kinds of aftermarket coilpacks, but are there really any difference between them except the price?

Found this relatively cheap coilpack set on ebay: http://www.ebay.co.u...=item1c27d92b13

Does anyone know how this works? Any good?

Many thanks on the replies!

-Lars

Link to comment
https://www.sau.com.au/forums/topic/414089-about-aftermarket-coilpacks/
Share on other sites

What's the difference between yellow jackets and the red splitfires? Are they the same?

Splitfires are blue

Splitfires are the best

Nearly 4 years with mine and not a single hiccup.

They will all create spark, but some are more reliable then others

Edited by 89CAL

To add to this thread, I recently bought a R33 and went to replaced the spark plugs and to my disbelief, I am running 5x Yellow Jackets and 1x OEM coilpack. So off to eBay I went to try and find 1x Yellow Jacket and instead saw these coilpacks "APPARENTLY" made in Japan and only $250 delivered from Japan... I do however find it too good to be true.

They are backed witha 2 year warranty (no idea how dafuq that's going to work LOL)

Cheap

Look like Superspark Coilpacks

I'm a tad game on trying them, considering the Yellow Jacket distributor wants $100 delivered for just 1x coilpack.. what a rip off!

oh link here:

http://www.ebay.com.au/itm/Performance-Coils-SKYLINE-STAGEA-LAUREL-NEO-Rb20-Rb25-RB25det-Coilpacks-Pack-R34-/271104651182?pt=AU_Car_Parts_Accessories&hash=item3f1f18afae

2nsm35y.jpg

1o99pf.jpg

Edited by johnnilicte

Seriously - just go Splitfires.

There are so many folk on here that buy everything else but splitfires to save money and have issues with at least 1 of 6.

Some have had them replaced free of charge and again at least 1 failure out of 6.

I've seen 2 reports of these Fuji coilpacks (red) misfiring on N/A skylines, 1 coilpack failing within the first couple of weeks.. i'd hate to see how badly they perform with more added stress (turbo skyline).

I bought genuine oem coils off ebay for my s2 recently for $250 delivered :)

http://www.ebay.com....1#ht_693wt_1271

I still can't wrap my head around brand new OEM coils for $250.. when they're like $100+ for each coil from most traders

I still can't wrap my head around brand new OEM coils for $250.. when they're like $100+ for each coil from most traders

They were over $1000 a set from Nissan!

I bought an ebay set and they look genuine and seem to work ok. I heard they came from a bankrupted Nissan dealer in the US though why they would have huge stocks of them I don't know. I hope they are not fake but are working so far at 20psi and 280kw. See what happens with a bit more power.

On another note a Stagea owner says his Yellowjackets broke down after 18 months!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...