Jump to content
SAU Community

Recommended Posts

So we picked up a LEAF the other day, and I thought it needed a build thread.

This is the starting point:

new_leaf.jpg

new_leaf2.jpg

Stage 1 will be the usual; bigger exhaust, pod filter, and some basic stuff like a good synthetic oil and an aluminium radiator

Stage 2 might look into a high lift cam, racing plugs, or a bolt on turbo, and if I go stage 3 it might include stroking the crank and an e85 conversion

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/
Share on other sites

I had exactly the same idea...

Electric is still just to expensive to get going fast.... power to $ is still a bit too high.

... my electric dream involves a retrofit. :yes:

I can't wait to see how it comes along.

Cheers

justin

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6737828
Share on other sites

Upgrade jobs list:

  • engine transplant from a Tesla Roadster
  • upgraded batteries from a Tesla Roadster
  • fiddle with the software to tune the sucker for out and out performance

Isn't this going a bit toooooooooooo green - when the rest of us are making the great sacrafice and converting to E85 to save the planet

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6737982
Share on other sites

Upgrade jobs list:

  • engine transplant from a Tesla Roadster
  • upgraded batteries from a Tesla Roadster
  • fiddle with the software to tune the sucker for out and out performance

Isn't this going a bit toooooooooooo green - when the rest of us are making the great sacrafice and converting to E85 to save the planet

Yesssss this is what we do it for :P

Wow, certainly a different build thread hehe

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6738364
Share on other sites

I was fortunate enought to have the oppurtunity to drive a pre-release tesla in the US, owned by a former employer. the 'speed controller' or governing conrolls were set more aggressivly than a production model.

It would have to be the fastest point to point car I have ever seen or driven... The initial take up was fenominal.

The power delivery was far to agressive for general consumption, but once you mastered the unique throttle application it was a blast.

Silent burnouts were odd though.

Electric cars are going to out perform anything we drive/modify currently... especially in stop/start style driving. That's assuming you can get the power down.

Batteries, motors and controll set ups are still just way too expensive for the performance they deliver. plus they still weight alot and even with a decent battery pack a perfomance set up will only achieve 300km before a re-charge at best. The last time I looked at a performance retrofitt, just the basic's are around 35k for the propulsion and batteries.

Goood luck with the leaf... I'm pretty keen to see how it comes together.

Cheers

Justin

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6738408
Share on other sites

  • 2 months later...

how f**king rude. start a build thread and then ignore it!

well we have not found any way to do anything about the motor's output, and probably won't while it is under warranty. I would hate to think about the cost of replacement.

we've been running the car daily for about 3 months now and it has been excellent. great hooning through traffic, and no-one ever suspects the ninja leaf is about to zoom past them.

cost wise, we charge it every 2-3 days @about $2. So about $5pw compared to $100pw petrol for the stagea. It will still take about 1000 years to recover the higher purchase price

range wise has been interesting. Obviously no issue in day to day use. The speed you travel at makes a huge difference though, it literally uses twice the juice at 110 as it does at 70 (this is probably also true for a petrol car but we just don't notice). I have twice had to drop back to about 70 on freeways to get the range back.

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6825187
Share on other sites

we took it to the SAU texi a few weeks back. I finished 4th (some courses in the stagea) and Kel finished 7th (all leaf). So it certainly gets up and goes fine.

it handled like a fat hatchback though, need to do something about that.....so we have a set of blitz ZZR springs and shocks on the way. Also looking into some custom swaybars because I think that is the big thing it is missing.

here is one of the runs, all of them are up on youtube if you like tyre squeal without engine noise.

Roy, yes it does run KERS and the braking appears adequate....so no 8 piston brembo setups required.

other than a little ricing it up a little, the only other sensible thing to do for now is put some lighter and larger wheels on it. It takes GTR size and offsets, does anyone have a suggestion of a forged wheel that will look good on a fat black hatch?

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6825199
Share on other sites

Roy, yes it does run KERS and the braking appears adequate....so no 8 piston brembo setups required.

other than a little ricing it up a little, the only other sensible thing to do for now is put some lighter and larger wheels on it. It takes GTR size and offsets, does anyone have a suggestion of a forged wheel that will look good on a fat black hatch?

10spoke, carbon fiber Wed's.... and an over fender style blister kit.

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6825850
Share on other sites

excellent video Simon....we are a long way off that yet but I have no doubt we will all end up there (except for dirty old race cars) soon enough. As battery prices come down it will totally change the costs.

re the wheels, my theory is something light and with larger spokes will have less unsprung weight than the stocker cast wheels, so it may not be a downgrade on range. And it really does need a bit more grip.

And let's face it....who on this forum has ever decided not to do a mod because it would result in 1% less from a tank of fuel :rofl2:

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6825898
Share on other sites

excellent video Simon....we are a long way off that yet but I have no doubt we will all end up there (except for dirty old race cars) soon enough. As battery prices come down it will totally change the costs.

I was shocked (pardon the pun) by that video... I always assumed we would end up all going down that path but honestly didn't see something like that possible even in the next 10 years. Obviously cost is the inhibiting factor at the moment but you would almost put your money on them dropping massively over the next 10 years, after all how much did a 42" Plamsa cost a decade ago?

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6826500
Share on other sites

I was shocked (pardon the pun) by that video... I always assumed we would end up all going down that path but honestly didn't see something like that possible even in the next 10 years. Obviously cost is the inhibiting factor at the moment but you would almost put your money on them dropping massively over the next 10 years, after all how much did a 42" Plamsa cost a decade ago?

Exactly right... Anyone who has dabbled in Radio Controlled vehicles will back that up. In the last 5 years alone the radio controlled vehicle dynamic has completely changed. Electric motors deliver much more power than a petrol/nitro of equivalent weight. Modern Lipo batteries and brushless motors offer awesome performance, and the price of each in the last 5 years has plummeted.

For me the biggest hurdle that the electric vehicle faces is not the range, but the time to charge. As if you need to conduct a long drive that will require a recharge on the way, the electric car is not an option. I can't see an electric car refuelling in 5 minutes (like we can with petrol) unless you swapped out the battery packs. And that isn't really viable.

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6827055
Share on other sites

It's pretty simple really, you just need a mind shift. We all remember to recharge our phones and don't worry about 5min charges while we are out and about. When you park the car you just need to consider if it needs charging before it's next use.

Having said that, I can't see myself living without a petrol car as well for lots of other uses including backup.

Some cars have been looking at quick battery swaps including one of the Renaults, but I think it is a long shot considering the infrastructure, the cost of each pack, and the fact that how you treat the battery makes a big difference to it's life....we all know how a hire car is treated vs your own car.....

Link to comment
https://www.sau.com.au/forums/topic/419341-building-a-leaf/#findComment-6827256
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...