Jump to content
SAU Community

Recommended Posts

6 hours ago, acesofspades31 said:


Hey Pete_Repeat,
I finally got the mirabox installed. However, I am faced with the following challenges :

1. I can mirror screen and screen only... For some reason, my audio isn't mirroring... I think that's because of some sort of limitations of my mirabox may be? Not too sure. My box has WiFi mirroring. May be there's no audio via WiFi? Did you come across something of this sort?

2. Parking brake mod emoji20.png. I've looked through the entire thread and I found its just grounding a cable. But will definitely look extensively on it. Any tips on this?

I think all screen mirroring uses wifi, and mine has no problems at all. As in never drops out or anything. Do you have a 5.1 digital or 2 channel switch on the box? Maybe it's not outputting from the rca audio plugs? 

 

My Audio streams fine with the screen of the phone turnes off as well (so less battery and drain on the phone with just audio streaming). You will still want a charger though I believe. The screen mirroring I use a lot for navigation. I bought a great little media Bluetooth controller as well.

The grounding is simple yes.. But I think a small amount of dash removal is needed. From what I read it's not too invasive.

 

Also, I used a ground isolation/filter for the picture and it cleared the image up from any sign of fuzzy. 

I know the list is expanding, but I could find the exact thing I bought if you want. I bought it from jaycar. Pretty sure it was for the video ground (rather than the power of the box) buy can't remember as it all hides away.

30 minutes ago, Pete_Repeat said:

The grounding is simple yes.. But I think a small amount of dash removal is needed. From what I read it's not too invasive.

 

I'd love to know how to do this... I had done a little research a while ago and thought it was a complex process with a defeat device needing to be fitted (for a 2009 J50 at least)

Cheers - N

34 minutes ago, talkiet said:

I'd love to know how to do this... I had done a little research a while ago and thought it was a complex process with a defeat device needing to be fitted (for a 2009 J50 at least)

Cheers - N

I haven't done it as mine was already done, but I believe it is setup to the handbrake sensor that grounds a certain cable/wire on the head unit. So if that is permanently grounded then video keeps working. 

I do stress I haven't done this myself as it was already on be on my car, but I did do some research before I bought the car and think I read something like that (and t is also quite typical for aftermarket head units to also do this)

 

Edit: as talkiet mentioned, it may also include a module for the speed sensing as well hmm. I suggest looking at g37 google searches rather than limiting to v36 as it returns more info and think they are similar enough to share most  info.. 

Edited by Pete_Repeat
  • 1 month later...

I see on AliExpress there are a couple of vendors offering an Android 7 inch navi unit which they describe as "Android 6.0 Car PC Tablet 2din Universal For Nissan GPS Navi Radio Stereo Audio Player (No DVD)" and other similar descriptions.

The few I have looked at appear to have the same inputs and outputs as the unit in my 370GT, has anybody tried a full replacement with something like this?

Is this a viable option for getting usable GPS with NZ maps?

I'm not totally dissatisfied with what I have, google translate lets me go thru the settings and get USB music and blutooth phone working, and I haven't needed GPS to find my way around NZ before, but I am just wondering if a fully usable Android interface is only a few hundred dollars away.

 

  • Like 1

V35 this would fit, with the usual Metra surround and replacement HVAC controls, but in the V36 it is a lot harder.

There is a Metra kit for the G37, however I believe it is G37 specific, so does not work with V36, and is also for non nav G37, and non-nav is pretty rare for V36s...

This kit...

If it was straightforward, I reckon I would have done it about 3 years ago.. But then again, I have a Bose and so bet it is even harder.... :3_grin:

Edited by nickcorr
Added URL to Metra Kit

So electronically it should be ok, but mounting and fitting it in may be a problem?

My layout is a little different than the Infinity G37,  I'm hoping I can fit in a 7 inch touch screen in place of the existing one, keeping the disk player etc.

Not sure about the nav buttons below the screen.  Some of the Android units I have looked at have a mapping feature for steering wheel controls, so maybe other buttons can be re-purposed too.

 

 

 

DBA-CKV36_dash.jpg

26 minutes ago, LesF said:

So electronically it should be ok, but mounting and fitting it in may be a problem?

My layout is a little different than the Infinity G37,  I'm hoping I can fit in a 7 inch touch screen in place of the existing one, keeping the disk player etc.

Not sure about the nav buttons below the screen.  Some of the Android units I have looked at have a mapping feature for steering wheel controls, so maybe other buttons can be re-purposed too.

Actually, it's electronically where you're going to run into the majority of problems. If you're hoping to continue using all the other features you're currently enjoying on your display, such as the camera(s), maintenance screens, Bluetooth (phone and audio screens), then the integration of the Android kit becomes questionable. I have no interest in the device you're referring to, so forgive me for not caring enough to do the research myself but just be aware that the only thing you'll be able to take out without affecting your AC and even your instrument cluster, will be the LCD touchscreen currently in there. The headunit sitting directly behind the button panel (double-DIN size) needs to remain intact and in service. If the Android kit can take over all major duties, including the bluetooth phone connectivity, then you may have a reasonable solution on your hands.

All that said, I don't trust Chinese engineering. They're clever at reverse engineering but not so clever at forward engineering. ;)

  • 4 months later...

Hi Chris, of I heard and read right you can fix my stereo and tv in my v35 2008 skyline, if this is correct could you reply or email me [email protected], I realise this isn't for free but would appreciate a quote, got to come down from Bundaberg.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...