Jump to content
SAU Community

Recommended Posts

So NSW Time Attack comes around. After the madness of getting the car ready and actually getting to the event.

DSC_0074.jpg

285/35's are very tall, so we had to massage the tubs a little. With the castor and under load there was some rubbing.

DSC_0135.jpg

  • Like 1

I've only been to Wakefield once and that was for the SAU Nats last year.

1.07 I think the time was.

So this time around I've got less weight, little more power and wider tyres.

1.04.9 on the coldest two days on earth, I though PI was cold in Winter, this place has nothing on PI.

It took a silly amount of time to get the tyres up to temp, we used so much fuel that after the second run on day two we had run out.

6x 20L cans and 60L in the tank, gone.

Most others were using Martini, which was no good and guys running Surogen were out and re-tuning for Martini.

1048718_678158665533640_292904634_o.jpg

  • Like 1

It's been decided that the splitter is not low enough to fully utilise the air and that the lower lip design wasn't the best aero wise.

So we knocked a template out of wood. We will be attaching the front in in a way that makes it easy to get on and off. Also need to look into the fasening system from the splitter, as that needs to be structural to the chassis not the front bar.

We also enlarged the intercooler opening, which isn't better for aero, but is for cooling.

IMG_20591.jpg

  • Like 1

The wing sits low on the standard GTR stands, so up it goes 30mm. These are made from 3mm alloy, one on each side of the wing stay.

Also notice the go fast tape around the boot from NSW Time Attack.

IMG_2069.jpg

Also trying out some F1 inspired wing end plates. The old man cut these out of 2mm alloy, with the angle grinder.

IMG_20661.jpg

  • Like 1

Some toys to fix the diff. A little gearbox maintenance with a new seat for the shifter and a new selector bush.

Also people go on and on about roll center and bump steer. While I understand the mechanical theory, in practice on the track...mmm not sure.

My front tie rods are not even near horizontal with the car is jacked up and suspension unloaded. They are still a good 10mm higher at the knuckle.

So I'm smashing out good times, with the front arms pointing skyward. I think the car handles extremely well. So I'm further interested to see if these KTS rod ends make any measurable difference to the way the car handles.

We changed the studs over to 70mm NISMO's a while back and now I've got some real wheel nuts. 2 piece project mu's.

IMG_20251.jpg

  • Like 1

Tyres, tyres. I know on the current set of wheels I can just squeeze a set of 285's on there. I'm sure 285/30 will fit no worries.

But....is there going to be a difference, even 0.1 seconds difference in going to a 295...

Now a 295 is going to bulgde the hell off a 10" wheel, so i'd need a 10.5. To do that the offset needs to be way out there.

10.5 + 15, GTR offset....on GTST guards...I think not.

So the question is, should I butcher the guards (which we are allowed to do this year) to fit the tyres.

This is a shot of the current set with a 30mm spacer (around the same offset as the 10.5). The wheel is loaded via a jack to running height.

IMG_2062.jpg

  • Like 1

I'm interested to see how you go with the tyre monitor, what is it? How much etc?

Brother bought it as a birthday present. Not sure.

It's going to save waiting time in the pits between warm up laps and hot laps.

As generally, it go out and blast a 80% lap, come back into the pits. Make sure the pressure are good, then go out and hit up a fast lap.

The car sits around heat soaking while the pressures are checked.

So as long as we calibrate the pressure readings from the senors with a good external gauge, it should be useful.

Do you struggle for rear grip at the moment or is purely chasing more corner speed? In which case I'd be thinking the fronts would be the main concern?

Ah OK, well let us know how you go with it, and what tyre pressures you run etc.

I'd also be keen to hear what alignment settings you're using, though you can PM that if you're happy to share but don't want to over-share as some people don't.

Edited by ActionDan

front castor -7 deg

front camber -3 deg

front tow +0.8mm (ea)

rear camber -1.7 deg

rear tow -0.5 (ea)

The camber settings change a little as we lift the front and rear regularly to find balance for the conditions. This also changes the tow slightly, though not much with the R33 arms.

I haven't got any adjustable arms on the rear, so the standard camber bolts are pushed all the way to max positive.

Wheel alignment settings go together with the spring choice, sway-bar setup, rake etc.

  • Like 1

It makes me happy to see a car which gets driven properly - I love the re-shells in the first few pages.

Good on you for driving your car and not sitting it in the garage worrying it will get hurt - like seems to happen a lot these days.

Great driving too, maybe i'll meet you at the track one day.

You should be commended for the time of 104.9 on a cold day as the lap record for the V8 Utes is a 108.00

Whitline make a replacement adjustable front sway bar link KLC108 that is stronger than the standard unit. Here is a link to their site. http://www.whiteline.com.au/product_detail4.php?part_number=KLC108

You will butcher your rear quarters trying to get the 295's to fit. You could roll and flare out your quarters a good bit more than what they are ATM, but chasing THAT much the quarter will sink further up and scrubbing out under full load will haunt you I reckon. I've pushed mine to the limit without major work, ie heating, pin pulling a totally re shaping. No way I'd get them under my quarters.

Super awesome job on the 1.04 mate. it was good to meetyou and see this car in the metal too :)

How much power is the car making now? Im lucky to hit 185km at the kink. but it may also be that you're carrying a bit more speed through the last corner and can get on it eairlier.

Are you going to make a fibreglass spiltter/airdam?

Have to get the diff back together and the front splitter sorted this weekend.

I want to get out testing AD08R as soon as possible. Yoki have an event on the 3rd of August, so that is the aim.

http://www.yokohama.com.au/en/ADVAN-Motorsport/ADVAN-Neova-Cup/ADVAN-Track-Days.aspx

My brother has also been designing a rear diffuser.

It's actually built now, but no pics of the actually until it's all done :closedeyes:

r29u9f.png

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...