Jump to content
SAU Community

Recommended Posts

Stretch lol, you get around the forum if I got it right :)

Rims are Advan RS-Ds 18X10 the tyres are 255/40 but have a set of Yokohama 265/35 AD08Rs ready to go on after I get the car back and use up the rubber on the car now :)

Stretch lol, you get around the forum if I got it right :)

Rims are Advan RS-Ds 18X10 the tyres are 255/40 but have a set of Yokohama 265/35 AD08Rs ready to go on after I get the car back and use up the rubber on the car now :)

255/40s on an 18x10 rim :blink:

I too call you stretch

Stop mucking around and put those AD08rs on

haha, I thought the stretch was from a wasteland thread I was playing on :)

The tyres were on the car when I bought it and as the car has been living away from home most of the time I have not bothered. I want play a little bit when I run it in before I put the AD08Rs on.

I wanted 275/35 but they do not make a 275, just 265 then 285 ?

haha, I thought the stretch was from a wasteland thread I was playing on :)

The tyres were on the car when I bought it and as the car has been living away from home most of the time I have not bothered. I want play a little bit when I run it in before I put the AD08Rs on.

I wanted 275/35 but they do not make a 275, just 265 then 285 ?

solution was simple.......should a got 285s :P

I know now :(

BJ said these 265s are the recommended size and I was not sure about the 285s but they do not last forever and if I like them, next time :)

what model you got mate?

R33's you can get away with fitting nice phat tyres but the R32's not so much

Yeah, gota call and could have got them for $220 as they got a lot in and trying to flog them :(

At first I was looking at going to 19x10.5 with the 285s but for whatever reason I changed my mind, cannot remember why, too much red maybe :)

When you are going through a learning curve with these cars it is not easy with anything you want to do, brakes and tyres are amongst the most confusing :/

But everything can become confusing and the more you read the worse it gets. In the end you have to make your mind up what you want from the car for yourself, then make the choice and hope it gets you what you want, it can be a costly choice if you get it wrong, lol

When you are going through a learning curve with these cars it is not easy with anything you want to do, brakes and tyres are amongst the most confusing :/

But everything can become confusing and the more you read the worse it gets. In the end you have to make your mind up what you want from the car for yourself, then make the choice and hope it gets you what you want, it can be a costly choice if you get it wrong, lol

I totally understand what you mean. I've been there.

However you can only try to do what you think is right.

Sometimes you get it wrong but that's how you learn.

Talking to peeps in the business is sometimes the best thing instead of researching

I totally understand what you mean. I've been there.

However you can only try to do what you think is right.

Sometimes you get it wrong but that's how you learn.

Talking to peeps in the business is sometimes the best thing instead of researching

After researching for ages I did speak to like mined blokes on SAU on just about everything I have done so far, then researched the info given. But they still have their preferences but a great guide to know what they have done has produced the type of results I wanted.

After I was sure what I had done to the car was not getting me the response I wanted I decided on the Nitto 3.2 stroker.

I kept everything from the earlier mods I did except the cams. I am sure I can get a lot more from the car but I do not need it :)

Probably went into over kill with the drive-train, but it all sounded soooooo GOOD :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...