Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 1 month later...
  • 5 months later...
On 2/22/2018 at 10:39 PM, MrFijiGold said:

Photo by Kelly Hollis

 

IMG_6004.thumb.jpg.74d32b48f2543e62ed75b813a86fd6d0.jpg

 

Not a big ban of decals, but I must admit this actually looks good. Do you have any other photos from different angles?

Congrats. Really nice car but go Z-tune front fender to complete the look?

On 5/2/2018 at 3:24 PM, I gotta R34gtr v-spec said:

my 3rd party host now charges to host photos,i'll put my own photos up.

 

P1010162.JPG

P1010175.JPG

P1010185.JPG

P1010186.JPG

Really nice and like the other R34 with Nismo decals - it actually suits. Sugest you get Z-Tune front fenders to complete the look. Really nice. 

On 7/10/2017 at 10:11 AM, QUP29 said:

IMG_6653.JPG

If the huge sticker on the side was removed and the licence plate mounted at the front as normal I would say it's really clean and tough looking. Very nice mate. 

On 4/10/2017 at 5:05 PM, stag98 said:

TE37SL's repainted

Hankook RS3 285/35

Nismo 52mm wheel nuts

Slight height adjustment.

17800228_10155112582134804_4826255226691866203_n.jpg

20170409_154203.jpg

20170409_200112.jpg

Really clean this is what love seeing on GTRs. Perhaps get the Nismo N1 carbon fiber wing blade to complete the 400R look. 

On 9/25/2013 at 9:17 PM, usmair said:

my bitch

483870_10152588301885467_65697679_n.jpg

My taste. Clean, simple and tough looking. No stickers and huge wings. Only thing I would change are the side and front indicators - go Nismo clear or smoked and get a bonnet N1 lip piece as orange looks a little dated but besides that tough. 

Not a big ban of decals, but I must admit this actually looks good. Do you have any other photos from different angles?

Congrats. Really nice car but go Z-tune front fender to complete the look?

Thanks mate. 

This car was modded by Nismo factory with the kit, decals, wheel and tuning package. At that point in time, the Ztune kit was in prototype phase and the body kit used is what you see on my car. I dont have the rear over arches (not a fan of them to be honest) & the CF lower lip..yet.

Its a good thing I am not a fan of the current Z-Tune front bar and fenders at all. I love how this car is and my aim is to keep it Z-Tune prototype spec. I now have acquired the final piece to this car which I will show when its installed.. 

Some more pics of the car below. The last pic is of the Z-Tune "Proto" 

13.thumb.jpg.38b78c2bc82e31a8a919891ec1a4d303.jpg

14.thumb.jpg.cf47e7d87581c2415cbc8f33b2724f23.jpg

43331303_248616692511256_4497869668551229440_n.thumb.jpg.6a4da3c4db436bf87da190e94a075675.jpg

IMG_4581.thumb.jpg.86a15e6e2cbc32db07a1b5c9f4608d54.jpg

530159308_nismortune4.jpeg.cfc12254763fd21dfd8e8d74f765f880.jpeg

 

  • Like 3
17 hours ago, MrFijiGold said:

Thanks mate. 

This car was modded by Nismo factory with the kit, decals, wheel and tuning package. At that point in time, the Ztune kit was in prototype phase and the body kit used is what you see on my car. I dont have the rear over arches (not a fan of them to be honest) & the CF lower lip..yet.

Its a good thing I am not a fan of the current Z-Tune front bar and fenders at all. I love how this car is and my aim is to keep it Z-Tune prototype spec. I now have acquired the final piece to this car which I will show when its installed.. 

Some more pics of the car below. The last pic is of the Z-Tune "Proto" 

13.thumb.jpg.38b78c2bc82e31a8a919891ec1a4d303.jpg

14.thumb.jpg.cf47e7d87581c2415cbc8f33b2724f23.jpg

43331303_248616692511256_4497869668551229440_n.thumb.jpg.6a4da3c4db436bf87da190e94a075675.jpg

IMG_4581.thumb.jpg.86a15e6e2cbc32db07a1b5c9f4608d54.jpg

530159308_nismortune4.jpeg.cfc12254763fd21dfd8e8d74f765f880.jpeg

 

This is how a GTR ought to be styled, stanced and kept clean and and tough. If you're not going for the full Z-Tune look then this is perfect as it is. Great example of a great looking R34 GTR. 

I just cannot understand why there are so many people out there who RICE up their cars with all the camber stance BS and massive wings etc. This is my taste and I can appreciate why it is also yours. 

Once again, a beautiful car. 

  • Like 1
  • 2 weeks later...
1 hour ago, alex182 said:

Old cars on older camers.

Here's a few of my artsy fartsy film shots of the old gal

000029.jpg

000010.jpg

000018.jpg

000024.jpg

000026.jpg

000035.jpg

000034.jpg

Both beautiful mate. Is this an older SLR camera? Somethings cannot be replicated. I love how the older cameras shoot photos.

14 hours ago, scarvuk said:

Late to the party ?!IMG20180922151741.jpg

Nice GTR but in my opinion - too many black happening so if the lights were clear and and botton lip was colour matched white the car would look much better. But clean for sure. 

21 hours ago, Robocop2310 said:

Both beautiful mate. Is this an older SLR camera? Somethings cannot be replicated. I love how the older cameras shoot photos.

Cheers mate!

Yes, it's an old manual focus SLR. A Minolta SRT101 from the 60s if that means anything to anyone.

With a trusty 50mm 2.8 prime lens. Basic setup, but bulletproof and enough to have fun with :)

12 hours ago, alex182 said:

Cheers mate!

Yes, it's an old manual focus SLR. A Minolta SRT101 from the 60s if that means anything to anyone.

With a trusty 50mm 2.8 prime lens. Basic setup, but bulletproof and enough to have fun with :)

Thanks for the sharing mate. 

Sometimes older things are better and this is a prime example. No way can modern cameras shoot like this. It has a rugged natural classic look to it just like the 20-30 year old GTR of its era. Love it. 

 

  • Like 1
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...