Jump to content
SAU Community

Recommended Posts

Hey everyone,

I'm clueless when it comes to most of this stuff.

Just wondering whether this is a 'good' turbo for it's price:

http://justjap.com/store/product.php?productid=16693&cat=294&page=1

Also wondering if anyone has had any experience with this product too.

Looking to replace my stock turbo and was linked this kit.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/435504-hks-turbo-kit-rb25/
Share on other sites

The GTRS is a great turbo, and designed specifically as a bolt on skyline kit, but it is three times the price of an equivalent Hypergear swap. Even an externally gated Garrett and custom fabricated exhaust/intake would probably cost less.

^^ what they said.

Remember that if you car is stock (or mostly stock) then its not as simple as 'just upgrade the turbo'.

You may need a number of supporting mods to be able to run it smoothly.

Its all in these forums so practice using the search function,, A LOT! =)

Cheers for the replies.

^^ what they said.

Remember that if you car is stock (or mostly stock) then its not as simple as 'just upgrade the turbo'.

You may need a number of supporting mods to be able to run it smoothly.

Its all in these forums so practice using the search function,, A LOT! =)

I read a few pages into this section of the forums and discovered that a lot of them were created years ago haha.

Therefore I assumed that searching for old threads would be semi-pointless due to outdated information, etc.

Also from what I know, all I need is a bigger fuel pump and I'm good to go.

If anyone is able to show me a similar or equivalent turbo which scotty nm35 mentioned, it would be greatly appreciated.

As I said, I'm a noob when it comes to most of this stuff haha.

Read the rb25 dynov results thread. start at the end

Will do.

And then join the hypergear revolution lol

Well if it's as good as everyone's saying it is haha.

You will need an ECU, fuel pump, injectors, intercooler and tune with any turbo you choose in that HP range.

Got everything except the bigger fuel pump then the tune afterwards.

Also, better off buying HKS turbos from Nengun/Greenline/etc because it ends up being a bit cheaper

Just Jap is great for most things, but found the price of the HKS turbos a bit much

I'll definitely check Nengun.

Thanks for all the responses.

Really do appreciate it.

Hypergears new highflows would outperform the GTRS, way cheaper too. Spend left over cash on Injectors and pump and convert to E85 :P

Not to start an arguement with you, but please justify what you mean in terms of out perform?

Are you meaning straight out power figure? Dyno king

Power curve will build sooner?

Torque builds faster?

Boost to power level, meaning same boost and engine stress?

Street driveable to track?

I only say this as i dont like statements that simply say 'out perfrom' or 'better' without any imperical evidence as it can mis-lead people into making a choice that might not suit what they are chasing.

Similar to people chasing power figures rather than a target of driving experience.

This is by no means me suggesting HKS or Hypergear, i say each person is different with different goals in mind, so find your end goal and build to that with price as a secondary option.

Not to start an arguement with you, but please justify what you mean in terms of out perform?

Are you meaning straight out power figure? Dyno king Better power, yes

Power curve will build sooner? Sooner, yes

Torque builds faster? Yes

Boost to power level, meaning same boost and engine stress? Yes

Street driveable to track? Yes.

I only say this as i dont like statements that simply say 'out perfrom' or 'better' without any imperical evidence as it can mis-lead people into making a choice that might not suit what they are chasing.

Similar to people chasing power figures rather than a target of driving experience.

This is by no means me suggesting HKS or Hypergear, i say each person is different with different goals in mind, so find your end goal and build to that with price as a secondary option.

Hence why he said it was better as a blanket statement.

Hence why he said it was better as a blanket statement.

Again i see an opinion and no imperical data of back to back tests or 2 dyno charts to prove this with all other factors being equal.

Do you have any charts to prove the curves do build quicker, more boost at same RPM, more power at same boost?

To clarify i dont have any that prove this wrong either.

I am an engineer so like to see evidence of what people claim, as i can claim anything i want as long as i dont need to prove it.

Edited by NISMOGTT

Again i see an opinion and no imperical data of back to back tests or 2 dyno charts to prove this with all other factors being equal.

Do you have any charts to prove the curves do build quicker, more boost at same RPM, more power at same boost?

To clarify i dont have any that prove this wrong either.

I am an engineer so like to see evidence of what people claim, as i can claim anything i want as long as i dont need to prove it.

You should check out the hypergear thread, there are more dyno graphs than there are sheets of perforated toilet paper on a roll.

And yes a SS1PU Hypergear will out perform a HKS2535, I dare say even a GT-RS

OP: If your dead set on a HKS turbo kit. I have a HKS GT2835 KAI kit for sale. I'm just using the intake for another 2 weeks or so. PM me if your interested. I've gone a Hypergear, but only because I wanted more power. If your only after 250-260rwkw then the 2835KAI is pretty spot on for this

OP: If your dead set on a HKS turbo kit. I have a HKS GT2835 KAI kit for sale. I'm just using the intake for another 2 weeks or so. PM me if your interested. I've gone a Hypergear, but only because I wanted more power. If your only after 250-260rwkw then the 2835KAI is pretty spot on for this

Never had my eyes firmly set on the kit, just curious about more info about it haha.

Does look like I'll be getting a Hypergear, just time to choose which one is best, as from what I've seen on their site they're around $900-$1200 too which is awesome.

Cheers though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...