Jump to content
SAU Community

Recommended Posts

On different setups, I ran the GTX2860's with the stock anti surge front housings with welded on flanges in my 2.8. In short they come on boost later than a 2860-5. They are quieter though

he modified the gtx housings to fit the Gtr

Yes married Thursday

I'M back again with more news... mechanic told me my oil seal is leaking and if i dont change it, turbos will need rebuild. Since I'm not doing any mechanic on my car, i thought.. if im going to pay labour $ to have my seal/gasket redone, I might as well check my turbo and swap them with brand new turbos to recover optimal performance of the car.

I found out about a company called Pure turbos..

They ask 1100$ to have both turbos rebuilt with new brass cage and new billet wheel. ( they say it will be as good as brand new turbos , if not better due to brass cage and billet wheel)

Now heres where i need your help... they offer me a 60mm billet wheel which should yeild a 40hp/per turbo upgrade ( probably taken from the gtx2860's figure) and a 63mm which would yeild 80hp/per turbo. They say turbo spool shouldn't be noticeable and if it was their engine, they would go 63mm.

I'm scared the 63mm will actually be too laggy and i have doubt about their claims on spool. if I had 2.8 stroker.. it would be a different story, but I'm only on a rb26 with 86.5mm.

What front compressor housing are you using, normal -5 or surge slotted? You will be more at risk of compressor surge with a bigger compressor wheel.

-5s housing !

Considering you only wanted 500-550 Whp, it's a not brainer. 60 MM wheel!

I also feel the same.. but you know.. if the lag is going to be 200ish rpm and your gaining an extra 40hp/turbo.. it's interesting lol.

200 rpm is heaps!!!!

Very true, people don't seem to understand what a few hundred rpm can do to a car...

My T88 on dyno was only 500rpm (ish) slower to get 15psi on the dyno compared to the 6262, on the road/track it went from being horribly laggy to very responsive

  • Like 1

^^ *like*.

Micko's old man changed his exhaust and went back to a stock airbox on his GTR. Overlay the graphs and it was 200 rpm everywhere. TOTALLY different car to drive. It went from a car which did nothing under 5000 rpm to be able to drive it quickly quite easily.

60mm. Do it. Don't forget you have a 2.6 too. A bigger engine you'd get away with it.

  • Like 1

Some open pods. Mmmm all that yummy hot air!

It was a 33 though. Different design to a 32 box.

I know I'd make more power going back to an air box but I'd never thought about earlier spool as I wouldn't have thought it would have made a difference.

I'm pretty sure I'd still be fine with a standard box at 325kw.

The whole shebang coming on earlier was more to do with sorting the pos "jap" exhaust out. Getting rid of the rubbish restrictive mufflers and mismatched pipes. Going back to the airbox was just something he did at the same time.

  • Like 2

Yep picked up 15-20kw throughout the midrange to redline. Was a night and day difference really was much nicer to drive and also made power feel more progressive not just a BANG & it was alive at 5000rpm :)

Very true, people don't seem to understand what a few hundred rpm can do to a car...

My T88 on dyno was only 500rpm (ish) slower to get 15psi on the dyno compared to the 6262, on the road/track it went from being horribly laggy to very responsive

There are times I've seen NO difference in spool on the dyno and still a very noticeable difference in practical use - dynos can be quite misleading at times!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...