Jump to content
SAU Community

Recommended Posts

Better fuel economy, because better torque.

You don't have to ring it's neck now.

On a road trip to Adelaide, I was getting the same economy as a 34gtt.

They said the motor had plenty of work on the Dyno and was driven around for a couple of days. The limiter was on and I drove it the same as usual on the way back, well not exactly, 5000rpm limit and no boost :)

Even without the final tune it was much better, especially on the twisty bush road were torque helps. I know blokes say it is only a gear change away (or 2 ), but

Totally different car to drive, I think I will get rid of the next 1000Klms very quickly and final tune done :)

Good news Pete glad to hear its sounding promising!!

So does the off boost driving satify you/compete with the TT VQ motor?

Yeah it seemed forever

I do not think it is as good as the TT350GT with the run in tune , 3.5 Lts, newer type motor and toss in a couple of turbos, different car, but after the tune, cams dialed in for response, with the limiter on 7500 - 8000rpm, I would put my money on the 34 :)

But the main difference for me is, I like to drive the R as the GT was an Auto and I got sick of no stick :cool:

I think I have to qualify what I have said as best I can :/

Both cars from idle ( no launch) to 4000rpms the 350 would beat the 34, the 34 has a motor that is has not had the final tune and I have no real idea what difference it will make to the response. But if the run in tune is a guide it should be pretty good.

The 34 with the final tune, approximate 100awkw extra with a bit more response, it would be interesting from idle.

Congrats on getting it back on the road

Thanks Daz

yeah good to be driving it again, now have to get the Klms done and tune it up and see what the sucker will do :)

  • Like 1

Should be done by Tuesday afternoon.

Chop chop!

Going to try for the Easter school holidays and stay a few days in Sydney.

If they can do it around that time we might be able to meet up after the tune and get your opinion on how it goes :/

They said most of the work needed was done on the Dyno , he said he likes about 1500Klms the motor before the final tune. Said to just drive it as normal but has set the limiter to 5000. Not sure how this works as they take it to 8000 on the Dyno.

They changed the oil after the run in, I have to keep an eye on the water and oil levels for a while, no problems after 400Klms :)

Took it for a run this morning, very smooth but needs the final tune to get more going on down there and lift the limiter out to 80000 :)

Did a few tests on low speed 60 in 6th, no problem anywhere and the same with all of the higher gears, I would say 2 gears better even with the run in tune.

It will be interesting to see what or any difference after the final tune to the low RPMs driving, I am sure it will be mad past 3500

Took it for a run this morning, very smooth but needs the final tune to get more going on down there and lift the limiter out to 80000 :)

Did a few tests on low speed 60 in 6th, no problem anywhere and the same with all of the higher gears, I would say 2 gears better even with the run in tune.

It will be interesting to see what or any difference after the final tune to the low RPMs driving, I am sure it will be mad past 3500

that rev limit! :P

get off sau and drive it

Hi Dave, they said it was set at 5000rpm, I recon it kicks in at 4500rpm , so there is not much time as the turbo starts to work. It is not mad , just very linear from 0-100 ish

Piss off, went for 100klms before my daughter woke up this morning, no traffic , it was nice to drive this car now as is , after the final should be magic :)

I wouldn't expect much change to low revs power (below 3500) after the final tune realistically.

Glad to e proven wrong though

I also hope you are wrong and look forward to trying to prove it, lol

I was hoping for the thing to be spooled by 4000rpms after the tune. I was expecting it to be approximately a 800 to 1000rpms sooner than it was before the build using the same PT6262, but with the new OS Valves and the UE cams getting a bit more air in there , but that may be just wishful thinking :/

Good to see you have it back and hopefully I will get to see it when final tune is done, would be nice to compair side by side with my 3.0 34

It will improve a good amount when they start playing with cam timing, if there is something CRD do well its cam timing, I still use the settings they did on my 32 from 8 years ago and they should have learnt more since then

Dave was pointing out the rev limit is to be set to 80,000rpm :)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...