Jump to content
SAU Community

Recommended Posts

  • 1 year later...

Maaaaaan, its been such a long time since i drove the GTR i anger.
poor little ladys just been chilling in the shed with a couple of starts to wake her up. i feel bad 

but....

historic rego is coming around soon, being an 89 model i assume the 30 year mark is starting next yes=ar.
what do i need to do to get historic rego? pay a membership at any old club or?


also say hellow to my 2nd LandCruiser.... it has some GTR influence :P
 

IMG_20180618_214148_032.jpg

41758769_451405978701074_8873934489789661184_n.jpg

41849048_491133948027865_1509753318908362752_n.jpg

41721463_1354843077985283_6345840099967631360_n.jpg

  • Like 3
  • 4 weeks later...
  • 3 years later...
On 5/17/2022 at 9:31 PM, GH05T said:

forgot this thread was here 

And...........

What's happening with the car?

 

all good?

crashed?

Stolen?

Sold to buy drugs?

 

I think that's all the options.

 

 

  • 4 months later...
On 5/18/2022 at 9:57 PM, Ben C34 said:

And...........

What's happening with the car?

 

all good?

crashed?

Stolen?

Sold to buy drugs?

 

I think that's all the options.

 

 

actually i still have her.
just had the engine pulled out and refreshed, full major service, replaced everything, deleted hicas, spent bit stacks of cash.
soon to get new coilovers and do all the bushes. i want to have it drivable at any time and its been dormant for so long it needed to eat some money

 

279601988_5012497822130904_5140553665370799662_n.jpg

279882621_5012497818797571_1008860014252534166_n.jpg

  • Like 4
  • 2 weeks later...

yeah im going to be much ...happier and setteled driving it now i know the engine has no suprises . then having everything nice and tight and new in the geometry, steering suspension, then new tires, refresh brakes and then ill look forward to a future paint job. but yeah having a car that just drives correctly without the increased chance of lunching an engine.


i really should consider new turbos through................rinning stock 🙁

What's the end goal weekend cruiser/daily?

100% do all the bushes with whiteline rubber not other brands urethane. 

MCA are the way to go, yes more expensive but ride quality is better and support is great. Been running their x-r purples (current pro sports model) for 7 years no issues and do a lot of street and track driving. Even big 2800km roadtrips on shit roads it rides better than my 370z. 

I look at it this way takes say 4 months to save for cheaper ones then you don't like them then need to save for another 6 months to replace them with MCA. Better off waiting an extra month or 2.

  • Like 2

Definitely spend a little more on your suspension, even for a daily driver, or actually more so for a daily driver with less than perfectly flat roads you'll want something that handles well, but is also compliant when hitting pot holes and rough roads (basically every street and Hwy in NSW at the moment)

Also don't go too stiff with your bushings, and if possible avoid pillow ball joints for less NVH and longevity of your suspension 

For a street car/cruiser, you'll thank yourself in the end 

  • Like 2

I would suggest taking a look at Shockworks over MCA's

but same idea much better suspension can give you a nice comfy ride AND a firm track setup. Instead of just being lower and stiff like BC,HSD, ISC etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...