Jump to content
SAU Community

Recommended Posts

Is this build really built for response, 8.5comp and no VCT sounds more like a big boost top end setup??

How would this build compare to a RB3025 neo with VCT and 9.5comp with even 50% E85 mix... surely that would of got big torque low down...

Yes I was trying to get response and from what I had, it is pretty good. It is very linear as it goes from idle to 6500rpm, well that was the highest I could go on the revs before it played up. But when I first came home I did get the chance to give it a launch from 5000rpm and there was a little 4W spin and no lag, so I guess you can say it has pretty good response.

To get near that before I was going from 7500+ rpm and it would still dig in a bit

Have no idea about your comparisons , I am sure there will be some blokes that could answer your question :)

Is this build really built for response, 8.5comp and no VCT sounds more like a big boost top end setup??

How would this build compare to a RB3025 neo with VCT and 9.5comp with even 50% E85 mix... surely that would of got big torque low down...

Has to run on 98 and you have to stop spending somewhere

Everyone would love V-cam....but cant always afford it

Lol, how exactly does VCT help response over dialed static cams when response is all you are after

Yet still yet to see any proof VCT is better then properly dialled cams

The advantage of VCT is that you can dial in your cams for response at as low a revs as possible and then still get a good push further up when your static cams would lag behind. So VCT does not of itself create better response but it enables you to set up for maximum reponse while getting better power further up than if you did not have VCT.

QED

LOL

ROFL

ETC

The advantage of VCT is that you can dial in your cams for response at as low a revs as possible and then still get a good push further up when your static cams would lag behind. So VCT does not of itself create better response but it enables you to set up for maximum reponse while getting better power further up than if you did not have VCT.

QED

LOL

ROFL

ETC

So what your saying is VCT does not help response against cams dialled in for response :thumbsup:

Proven !!, really, where exactly is the proof, i read alot of people saying it's better but still no ACTUAL proof

So what your saying is VCT does not help response against cams dialled in for response :thumbsup:

Proven !!, really, where exactly is the proof, i read alot of people saying it's better but still no ACTUAL proof

Way to be selective in what you read.....

The whole point of VCT is that you can have the (int eh case of a RB25) intake cam set for max twist down low, then have it change over to carry the torque curve further up the rev range....

But Porsche, Ford, Merc, BMW etc etc must all be wrong......

Way to be selective in what you read.....

The whole point of VCT is that you can have the (int eh case of a RB25) intake cam set for max twist down low, then have it change over to carry the torque curve further up the rev range....

But Porsche, Ford, Merc, BMW etc etc must all be wrong......

Lol, kettle black mate

The point started at someone saying built for response but don't have VCT, i posted how does VCT better static cams dialed for response then Kiwi responded basicly confirming what is said

At no point did any one mention response AND topend :/

As the guys mentioned, i have posted my graph of my stock factory RB26 more then once for people to beat for both bottom end as well as top

And i'm still waiting

We are also only talking RB25 VCT V RB26, or any other cam timing setup that only changes the inlet cam timing from one maximum to the other, though would love to see how a RB with the VE cam setup would go

.....

As the guys mentioned, i have posted my graph of my stock factory RB26 more then once for people to beat for both bottom end as well as top

And i'm still waiting

....

ooooo.....where?

Xkalaba, don't take it as a personal attack you have to defend!

I don't like your chances of getting a guy with stock turbos chucking vct on, so I don't think you will ever get the direct comparison you are after.

What's your idle like with the dialed cams?

Xkalaba, don't take it as a personal attack you have to defend!

I don't like your chances of getting a guy with stock turbos chucking vct on, so I don't think you will ever get the direct comparison you are after.

What's your idle like with the dialed cams?

Spends 8k+ on VCT kit but keeps stock turbos :rolleyes:

Idles like a babies bottom, smooooth as

Not like the 34, lol

Like i said, i'm happy to see a NEO with any turbo you like, so given the NEO has a "better designed combustion chamber" and NEO and the latest tech single turbo you can get it should easy walk over my 80s tech bush bearing factory twins on a static cam setup

I want to see same boost (19psi) run 290+rwkw and beat my 26 for response then prove it on the drag strip cause we all know dynos can be made to lie

I'm starting get personal about it cause every time i come on a performace thread someone throws up should have gone NEO or VCT and saying it with no proof is misinformation

ooooo.....where?

Fark it, cause one more time won't and you asked so nicely :P

post-36620-0-27148400-1429787456_thumb.jpg

This graph was done at a SAU dyno day back in 2007 4 days after the full wieght plus stereo R32 GTR ran back to back 11.3@125mph with a stock motor, the stock turbo world record in the link in my sig

  • Like 1

Fark it, cause one more time won't and you asked so nicely :P

attachicon.gifimage.jpg

This graph was done at a SAU dyno day back in 2007 4 days after the full wieght plus stereo R32 GTR ran back to back 11.3@125mph with a stock motor, the stock turbo world record in the link in my sig

I should have bought your car from the get go, would have saved me a shit load of money and hassle , haha

  • Like 1

I need to learn more, but arnt the RB26 and the neo25 pretty similar heads ( apart from VCT) , if they arnt that much different then the VCT would of been good, in comparing response im thinking about how 34GeeTee's 2.5L graph with the HTA3076 has 280kw's at 4000rpm and that doesn't even have a stroker kit...

Edited by AngryRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...