Jump to content
SAU Community

Recommended Posts

GO HIGHER POWER MUHAHAHAHAHA. I did caps to convince you.

This thread has taught me alot about turbo sizing and how it all works - thanks team.

And no its not max for pump fuel - mine hit 404KW with max'ed injectors and turbos still had puff (2.6L).

Pegged back to 370+.

The PT6262 CEA was not put on this 3.2 build, it was done to replace the T78 on the 2.6 and recommended by the builder as it would not be hard to fit to the existing setup. It was much better

I left the 6262 on to see if it worked on the 3.2 build , if not, it could always be changed.

The flex fuel sensor was an after thought and something my son could use if he wanted. I cannot buy E85 here.

While it is on the Dyno they will be able to have a better idea if a different Turbo would do the job better and then choose one to do the job. But I am not taking it off until the new mechanic recommends it.

So enough of guessing, time to wait and see, if I have to change the turbo, then you can say, I TOLD YOU SO :spank:

GO HIGHER POWER MUHAHAHAHAHA. I did caps to convince you.

This thread has taught me alot about turbo sizing and how it all works - thanks team.

And no its not max for pump fuel - mine hit 404KW with max'ed injectors and turbos still had puff (2.6L).

Pegged back to 370+.

LOL, Talking to a builder that used the 6262 on his 2.6 and it was full boost around 4300rpm :)

Originally I was going to run my hks t04z on my current motor, some guys said it would be responsive but they also said that the turbo is still small for the engine. It was going onto my 2.7 stroker, to4z is equivalent to 6262

Originally I was going to run my hks t04z on my current motor, some guys said it would be responsive but they also said that the turbo is still small for the engine. It was going onto my 2.7 stroker, to4z is equivalent to 6262

What did you want from your car, a lot of blokes here are saying the 6262 is too big to get response, duh?

Wish I knew a little more, but time will sort that out and not too long to go :/

What did you want from your car, a lot of blokes here are saying the 6262 is too big to get response, duh?

Wish I knew a little more, but time will sort that out and not too long to go :/

my setup is built for weekend drives and the odd power cruise etc just straight line attack, my motor was built to run e85 CR 9.1:1

I originally was happy to run the t04z for response but then I change my mind as now we are trying to build a fast responsive 1000hp, now running precision 6870 also my setup will be revved to 9,500-10,000rpm

So pretty much drag power band

I wouldn't bother with the e85 tune if I were you as you said you can't get a hold of it regularly.

i also think CRD has done a good job on the tune. Seems good and safe as my tuner also doesn't like big boost on pump fuel.

pick how much power you would be happy with and build your setup around it

But that's just my opinion,

Edited by QUP29

my setup is built for weekend drives and the odd power cruise etc just straight line attack, my motor was built to run e85 CR 9.1:1

I originally was happy to run the t04z for response but then I change my mind as now we are trying to build a fast responsive 1000hp, now running precision 6870 also my setup will be revved to 9,500-10,000rpm

So pretty much drag power band

my setup is built for weekend drives and the odd power cruise etc just straight line attack, my motor was built to run e85 CR 9.1:1

I originally was happy to run the t04z for response but then I change my mind as now we are trying to build a fast responsive 1000hp, now running precision 6870 also my setup will be revved to 9,500-10,000rpm

So pretty much drag power band

Sounds like you are going to have a ton of fun , all the best :cheers:

I wouldn't bother with the e85 tune if I were you as you said you can't get a hold of it regularly.

i also think CRD has done a good job on the tune. Seems good and safe as my tuner also doesn't like big boost on pump fuel.

pick how much power you would be happy with and build your setup around it

But that's just my opinion,

The E85 is just an option.

Not going on about the tune and I do not care about the boost level, the question is , why does it drop of. As you know there was a major problem with the tune and it would cough and fart over 6000rpm. I wonder if by dropping the boost off it might be masking the original problem. I ask the builder but did not get an answer why the boost is tapering off by 5.5psi.

I find this a fair question to ask and would expect an answer , but ????

They know you aren't coming back, you've plastered it all over this thread. Basically you left happy and now they are leaving at that, but because a bunch of people jumped on here and said "why is the boost falling away" now you want answers

Time is money and you have no interest in spending money with them anymore, so they will give their time to people who will. I know of workshops that charge for time on phone

They know you aren't coming back, you've plastered it all over this thread. Basically you left happy and now they are leaving at that, but because a bunch of people jumped on here and said "why is the boost falling away" now you want answers

Time is money and you have no interest in spending money with them anymore, so they will give their time to people who will. I know of workshops that charge for time on phone

He already knows the answer. He is just ignoring it. An engine is just an air pump. His results are on par with a majority of other results using the same turbo on 3l+ capacity but somehow he believes it should be different. Maybe some fairy dust and a happy dyno is what he needs.

  • Like 1

What he needs to do is decide if he likes the way the car drives or not and stop looking at dyno sheets and close down this thread so he doesn't have everyone's opinion and just has his own

  • Like 1

He already knows the answer. He is just ignoring it. An engine is just an air pump. His results are on par with a majority of other results using the same turbo on 3l+ capacity but somehow he believes it should be different. Maybe some fairy dust and a happy dyno is what he needs.

If I knew the answer, I would not ask the question.

Your saying other blokes have the same Dyno results as mine, I do not mean the HP, show me one where it tapers off around 5000rpm and the bloke is not asking why, love to see it/them

No, it does not drive how I want it, maybe it never will , give me some of your fairy dust :)

Type in 'PT6262 graphs' in Google images, click on the sites and you will see for yourself what the results are. From supra forums to bimmer to evo forums your turbo does the same thing, that is it peaks at 5k to 6k and then loses 5+ psi when it goes beyond its VE. Actually all turbos will. That's why they go from a 6262 to a 6266 or 6466 with less restrictive turbine side where their VE limit is not tested and they hold boost to higher rpm. Invest 2 hours in doing this and you will never ask 'why' again.

Just for the record, for someone that wants low end torque I think your setup is awesome, but you are just getting sucked into the peak HP, chest beating, dyno queen head space, do yoirself a favour and forget about it. Just drive the thing for a year. Don't worry about the numbers.

Edited by XGTRX
  • Like 2

V8's are overrated, Just set that RB up properly, look at the results with FP turbo's, an FP35 combo would give you what you want both response and top end with right housing, just look at 34GeeTee's results with only a FP3076 on an RB25, he got 390kw's with big mid range, with a 3.2L and FP35 it could be a perfect match...

Edited by AngryRB

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...