Jump to content
SAU Community

Educated Guess At The Final Tune Results


Nismo 3.2ish

Recommended Posts

Short story on what to put in R34 GTR box: I know people use a variety of synthetic atfs but upshot is both Nissan and Getrag say do not use anything but correct OEM fluid which is available from Toyota Dealers (and presumably from Nissan).

Quote:

Spoke to Getrag themselves and they insist on using Dexron II oil because these gearboxes were designed with bushing that do not suit modern synthetic oils.
I am now going to use Toyota T IV.

The long story is in the attachment...

the-great-v160-fluid-challenge-rev1.pdf

Link to comment
Share on other sites

Short story on what to put in R34 GTR box: I know people use a variety of synthetic atfs but upshot is both Nissan and Getrag say do not use anything but correct OEM fluid which is available from Toyota Dealers (and presumably from Nissan).

Hi Bob, so Nissan have other oil products for modified cars to help soften the shock to the gears once you have extra torque/power . I think in the old days they stuffed bananas in diffs and boxes :woot: just to quieten them down a bit, well until the buyer was out of sight, lol

Cars were so much easier when I just bought the bloody thing and drove it, instead of this crazy modifying drug.

Just thinking, if needing grog and other drugs is called an "illness" and you can be treated at no cost, can I get some generic parts for my car on some sort of hand out program , because I am hooked ???

If not I will cop a few bottles of red on the cuff :yes: :yes: :yes: :yes:

Link to comment
Share on other sites

Awesome result Pete, good to see with a couple of changes and a tuner that took the time to find and fix the problems you got the power this thing should have been putting out from the start!

So many tuners don't even perform pre dyno checks like an intake pressure test for e.g.......

......I'll take your R34 box of ya cheap when you put the OS88 in ;)

Link to comment
Share on other sites

Awesome result Pete, good to see with a couple of changes and a tuner that took the time to find and fix the problems you got the power this thing should have been putting out from the start!

So many tuners don't even perform pre dyno checks like an intake pressure test for e.g.......

......I'll take your R34 box of ya cheap when you put the OS88 in ;)

Yeah, he did a great job, looked at what could be holding it back and crossed them off and moved on . It is ready to pick up but I am tied up with my daughter's sport over the weekend.

The BOX, you might only have to run behind the car with a box and pick it up for free :yes: :yes:

Link to comment
Share on other sites

Yeah, he did a great job, looked at what could be holding it back and crossed them off and moved on . It is ready to pick up but I am tied up with my daughter's sport over the weekend.

That's commitment. Are you still playing goal defence ?

  • Like 1
Link to comment
Share on other sites

It is retarded about 5 degrees already Micky.

5 degrees from where exactly, my guess would be CRD found correct 0 and that is 5 deg retard on the cam gear which would make sense of the inlet being 3 deg retarded also
Link to comment
Share on other sites

5 degrees from where exactly, my guess would be CRD found correct 0 and that is 5 deg retard on the cam gear which would make sense of the inlet being 3 deg retarded also

That sounds like it could be right, he had to get 0 and that was in the retarded position, I think :yes::no::yes::no::yes::special:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Awesome to know. I have a Series 1, and When pulling my front bumper off for the first time i realised my reo/crash bar was a bit worse for wear, and was going to try pick up a better one soon just so i can replace it. Someone is selling a full series 2 front bar and brackets for a decent price, so was going to probably reuse my brackets and install the new second hand reo/crash bar. I also have a genuine Altia body kit to do up, spray and put on, and not sure if that will use the series 1 or series 2 brackets for the front bumper, so having both will be handy, and knowing i can drill holes out to make stuff fit between series is also handy to know!
    • I should also say that the while they are different the only parts that matter are the center headlight supports and center bar from S1 to S2. The center bar will work, but the S1 has holes that clips go through into the S1 bumper. So if you were super cheap you could simply drill the S2 bar. Same thing with the side/wings. They have slightly different 'clips' but can be made to work. The center headlight brackets however, cannot. This is also where the GTR differs, which has a different center bar, and different headlight supports (to either GTT system), it also has different 'wing' headlight supports which is what I am calling under the headlight. However those CAN be made to work with the GTT Reo for a GTR front bar by a small spacer and a drill/tapping a thread into the reo because the bolt positions are slightly different. So people only really need the center brackets to go between GTT S1, GTT S2, and GTR if you are happy to do some tinkering.
    • Indeed  😃  Appears the site is back up now (migrated not updated) - kudos @funkymonkey & @PranK
    • If this, then this You can't really get away without it. There are hacks that you can do in Nistune, but things are much easier with the sensor than without it. If you're not planning to Nistune the ECU, then stop right now and add it to your plan anyway, because the ECU is going to shit the bed over the missing ABS and TC computers that it expects to see, and you need Nistune to stop it chucking all its toys over the side of the crib.
    • hey guys, so ive done a complete +t conversion using mostly stock parts on my rb20de neo r34.  Im wanting to know if a boost pressure sensor is needed? Seems like the engine cuts out when i try to do a pull and I have a feeling its because a boost pressure sensor is missing. I'm using a stock r34 rb25det neo ecu.
×
×
  • Create New...