Jump to content
SAU Community

Recommended Posts

Very apples and oranges, from an ex-F6 and gts4 owner. The XR turbo are ready to roll....(carry the family on long trips), boost etc, but despite good suspension make them boat like (due to the good but heavy sedan body). An r32 is a relic, one that you conquered (great combo using a responsive neo) but for a passionate driver, but the small nimble and agile r32, in need of the fettling and patience a now old car requires.....has rewards separate to a boat. You once posted about the joy of the hills, and Rolls you now post about boats, perhaps you will live up to your avatar name and a Rolls will be your next post such as a turbo Bentley.

Edited by DR 32R

Bungee jumping has better ground rush. Skydiving has better fun/$ and longer thrill factor.

I once drove the JMS S12 Silvia (Gazelle). 650HP FJ20. Used to lift the front left wheel 450mm up into the air - on the street. That was scary. A turbo 13B S1 RX7 was a similar sort of ride and equally scary. A 1000HP HKS engined Supra I drove didn't have the chassis flex of those two, but simply leaped into the future whilst leaving large portions of the tyres behind. That was the most scary.

lol 650hp... good ol allen engineerings guessimate engine dyno ...it made 250rwkw ...and that was on a good day...so maybe 450hp at the crank

cheers

darren

Edited by jet_r31

lol 650hp... good ol allen engineerings guessimate engine dyno ...it made 250rwkw ...and that was on a good day...so maybe 450hp at the crank

cheers

darren

Maybe so. The number I was told back then was 650. I had vague memories of seeing it do well over 300rwkW on a chassis dyno, but as usual there was no way to know what settings were in use or where they were hiding the air temp sensor! It was still a scary thing to drive. Bloody loose.

Yeh was fast for the day!

I saw it make 240-250rwkw on many dynoes

tilbrooks always read the highest back then..

That turbo woudnt flow anywhere near 300rwkw

Was a dirty old t04e on it

From memory it made maybe low 500s something on allens engine dyno

cheers

darren

300 kilos is a lot 2 deal with when you're trying to carry corner speed skinny back tires lots of talk and too much power means your traction control is constantly cutting power or if you turn it off you will spin the tires and go slow, while we spin the tires and overtake you. Is only so much power a 245 tyre will take plus it's ugly as f**k but congratulations on the purchase

  • 2 weeks later...

I havent really read the whole thread but with the Barras, once you go over 260rwkw you should look at upgrading the valve springs at a minimum.

Only on the BAs and Mk1 BFs, the rest all have upgraded valve springs from the factory that won't float until you get to 400rwkw

300 kilos is a lot 2 deal with when you're trying to carry corner speed skinny back tires lots of talk and too much power means your traction control is constantly cutting power or if you turn it off you will spin the tires and go slow, while we spin the tires and overtake you. Is only so much power a 245 tyre will take plus it's ugly as f**k but congratulations on the purchase

Well then it is lucky you can fit 18x305 in the stock guard with only rolling it, I have 265s which hook up in first with over 300rwkw. Never turn traction control on unless it is wet and I don't have any issues.

Edited by Rolls

Only on the BAs and Mk1 BFs, the rest all have upgraded valve springs from the factory that won't float until you get to 400rwkw

Well then it is lucky you can fit 18x305 in the stock guard with only rolling it, I have 265s which hook up in first with over 300rwkw. Never turn traction control on unless it is wet and I don't have any issues.

305 on the rear?

that won't stop your front end from running wide. do they fit on the front too?

Only on the BAs and Mk1 BFs, the rest all have upgraded valve springs from the factory that won't float until you get to 400rwkw

More like the later BF models through to FG models got the F6 engine.

Still the valve springs are fit and miss.....even FG owners are upgrading springs to go over 300Kw.

305 on the rear?

that won't stop your front end from running wide. do they fit on the front too?

I've found a 245f and 265r to give neutral handling, you can get a 265 on the front but you end up with the rims out the guard and it looks pretty silly.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...