Jump to content
SAU Community

The Americans Are Cranking It Up..........


Recommended Posts

What's with the bonnet margins Bob, poor bodywork or did he forget to close it.

No....... Just a sh!t fit!

EVERY importer says the same thing........ "We get everything checked out blah blah blah"......

They can't even align the bonnet. So yes at best a respray and worst who knows.

Bob.

post-78207-0-82195700-1432464712_thumb.jpg

Link to comment
Share on other sites

true Bob

Drivers door doesn't sit flush when closed, bubbles in the dash.

"We import the best available" " You can Redline and it wont blow up "

Sure ?

Be a fair few of the pre 90's in the US of A rebuilding engines and replacing oil pumps and extending sumps.

Link to comment
Share on other sites

Taking marketing lessons from Edward Lees huh?

I'm sure the Japanese will only sell them the best examples!

Perhaps we can expect a busy influx of North American SAUers?

I think I should dust off my welcome mat!

Anyone here need to sell spares across the Pacific?

Link to comment
Share on other sites

Japanese Classics is probably the best importer when it comes to marketing right now since they have this and they sold an R32 to a writer for Jalopnik. I know they've had plenty of satisfied customers but saying they only bring over the best is marketing BS and anyone who just swallows that drivel here in the US is getting set up for disappointment. The truth is, because of the 25 year rule, we're basically scrounging for the leftovers at this point. There are still some nice R32s out there but most will need restoration to some degree and parts aren't "just around the corner" like this video says. I've been able to get the parts I need but I've done a lot of homework and talked to a lot of people to do so.

I'm seeing a lot of guys here in the US buying or wanting to buy these cars and I'm not sure all of them are informed enough about what they're getting into and this video doesn't help. I bought my Nismo knowing I'd have to do some restoration and with the full intent of doing so. I think a lot of buyers may end up just being overcome by nostalgia and then find out later it's not easy owning a JDM car never sold here in the States, especially one that's seen 25 years of use (and abuse in a lot of cases).

Link to comment
Share on other sites

Looks like a crappy flimsy aftermarket bonnet, probably some bad fibreglass copy. Otherwise pretty standard cheap auction car LOL

Lets hope a bunch of imported 32's don't start showing up at all the "stance" circle jerk events, hardparked with airbags and wheel poke

Link to comment
Share on other sites

Japanese Classics is probably the best importer when it comes to marketing right now since they have this and they sold an R32 to a writer for Jalopnik. I know they've had plenty of satisfied customers but saying they only bring over the best is marketing BS and anyone who just swallows that drivel here in the US is getting set up for disappointment. The truth is, because of the 25 year rule, we're basically scrounging for the leftovers at this point. There are still some nice R32s out there but most will need restoration to some degree and parts aren't "just around the corner" like this video says. I've been able to get the parts I need but I've done a lot of homework and talked to a lot of people to do so.

I'm seeing a lot of guys here in the US buying or wanting to buy these cars and I'm not sure all of them are informed enough about what they're getting into and this video doesn't help. I bought my Nismo knowing I'd have to do some restoration and with the full intent of doing so. I think a lot of buyers may end up just being overcome by nostalgia and then find out later it's not easy owning a JDM car never sold here in the States, especially one that's seen 25 years of use (and abuse in a lot of cases).

A few random things.

1. If you had have seen the rubbish that was imported to Straya under the 15 year rule (1989 & a few 1990 model R32's) you would have a healthy scepticism for anything that is left. To be honest I don't know whether or not we got all the crap ones or just all the 89 MY 32's that were ever built. If it were me I would wait for a 1991 version as supply will increase greatly I would have thought as they were mostly not allowed to be imported into Oz.

2. Parts are pretty easy, all things considered.

3. Nostalgia is most of the reason for owning an old car. Most old cars are never restored properly - R32 being no exception.

4. Most cars ont he internet look better than they do in real life. It is only by owning something that you get to know its faults down to the tiniest missing nut, bolt or washer. This was reinforced to me when the owner of a car I thought was the business said of an oil leak "It was only the old dipstick being pushed out of the holder". Well that is ok then. May need to reconsider my position in the whole stand up shouting match I had with my ex engine builder about that very thing.

  • Like 1
Link to comment
Share on other sites

If it were me I would wait for a 1991 version as supply will increase greatly I would have thought as they were mostly not allowed to be imported into Oz.

Very true....... Not too many people know this.

Due to the Australian delivered cars being sold at the time, R32 GT-R's built between July 1 1991 and June 30 1992 are prohibited imports.

I wonder how many have come in over the years to end up as expensive track cars?

Bob.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Is WHC34 a 2 wheel drive Stagea?  4wd Stagea 100% fits, and I'd say 99% sure 2wd will too....they just used the GTR setup as that best suited the wagon floor. BTW I hope you saw Brett's post about potential reasons for a leak, unless you can see the plastic cracked somewhere, it is unlikely to be the tank itself leaking.  Can you see fuel dripping or is it just a smell when you park? Have you had any of the tank/pump holder apart?
    • They did get back to me. First response is from the mechanic that did the work. The problem is that the information that followed wasn't in the original report, which again, I let car inspect know should have been provided and influenced my decision to buy. Ball is back in their court and they have 5 more days to respond.  The actual structural damage was not a complete write off as they had me originally believe.  It just needed to be corrected properly and cleanly as opposed to the botch job of whoever did it last on the rad support and undercarriage. Smoothed out the scrappy welds and did it properly plus painted.
    • Haven't updated this is a while. -5 speed conversion is done. Then center console, parking brake handle, and mounting bracket can be adapted from a R34 since the S2 parts are all disco. Console is a slightly different grain pattern and color but works fine. R33/ R34 GTS (no booster) clutch pedal works as well as the matching master cylinder. Wiring is simple, jump the starter connector at the fuse box, note which wires are connected at which position on the auto neutral safety switch and cut off the switch harness and connect to the corresponding switch on the 5 speed. -Rear R34 rear subframe swap is completed. Full Nismo arm set, 2-way LSD set up soft, 322mm Brembo brakes, Ohlins Flag-R coil overs (need to drop the spring rate 1Kg) -RB swap is under way. HKS Step 2 High Response 2.8 BCD stroker kit / Step 2 V-Cam / GTIII 4R Kit I may not use the 4R kit but not sure yet as I've seen some pretty decent dyno sheets on it and it doesn't spool as slow as people think when you have v-cam. I have the wiring manual for the car and a spare 260RS harness so the wiring shouldn't be that bad but I just haven't had the time to invest in it. If anyone has a suggestion for someone who can handle it let me know! I have a bunch of spare 5mt swap parts and some Nismo 580 turbos if anyone needs/wants them hit me up. Located in California but willing to ship. As always, thanks to all the members who have answered my questions and helped this project keep moving!      
    • Did Car Inspect get back to you? How bad was the actual "structural" damage? What front surgery was required?
    • I would be, however the last PS I owned was a PS1 and the last GT I played was GT1 lol. Also, how do you dads even have time to do anything? I barely have time to even sleep 7 hours a night!
×
×
  • Create New...