Jump to content
SAU Community

Recommended Posts

3 hours ago, viper2002 said:

Anyone know how I can get in contact with the SAU Secretary? Need to get a confirmation of my membership for a track day tomorrow but it's hard getting an e-mail replied to...

 
 

In response to the email you sent last night, yes you are a member. Secretary is sending you info tonight.

Hope your track day is a great one :)

20 hours ago, Tony Olsson said:

In response to the email you sent last night, yes you are a member. Secretary is sending you info tonight.

Hope your track day is a great one :)

Thanks Tony, e-mail was received. Track was very fun :)

  • Like 1

so i buy one of these USB to DB25 parallel cables: https://www.jaycar.com.au/usb-to-parallel-bi-directional-cable/p/XC4847

plug it in, under Device Manager its listed in USB controllers: USB Printer Support. The software I'm using needs it to be a LPT port.

The internet has some solutions for people using old software with new printers, so ive followed them:

Create new printer. Assign it to USB Printer Support. Right click on it and go to Printer Properties. Select LPT1 port. I try to send file with software, software says did not send.

I tried enabling Print Pooling and selecting both LPT1 and the USB Printer Support port. Still does not send.

Then tried creating another printer and assigning it to Virtual USB port001, in printer properties, select LPT1 port. Files does not send.

Any IT folk have any suggestions? the software just sends a basic text file, its not going to a printer.

8 hours ago, emts said:

Oh chatted to a EPA guy on the weekend.

asked about the car testing currently.

 

Didn't answer the question, but did say he uses the building where they test as his car park everyday.....

Why the secrecy does he believe he is in a role that is top secret like Area 51?

 

Is he implying that the testing is active hence there everyday? Or that his team has taken over the area and they no longer test? :/ 

Why the secrecy does he believe he is in a role that is top secret like Area 51?
 
Is he implying that the testing is active hence there everyday? Or that his team has taken over the area and they no longer test? [emoji32] 

If he was implying it was business as usual then there wouldn't need to be so coy... sounds like the intake of cars is slowing down?

Someone drive past the moorabbin workshop & have a look at the number of cars outside?
55 minutes ago, emts said:

implying the place is only used for car parking.

 

never going to openly admit that they are not testing cars.

top mount external gates here we come

 

These aren't RWC safety items right? or Wrong? :/

been keeping an eye on SLX shares since November. stable, no activity. During christmas break goes from 39 to 50c. then stable for weeks. suddenly hit 70c today. :( oh well. we cant all be like Ash Ketchum.

4 hours ago, Leroy Peterson said:

been keeping an eye on SLX shares since November. stable, no activity. During christmas break goes from 39 to 50c. then stable for weeks. suddenly hit 70c today. :( oh well. we cant all be like Ash Ketchum.

yeah but you would have had to buy 1,600,000 of them to be worthwhile anyway

Tempted to go Winton this saturday they've got a bike day, wonder what times I could lay down with the bike 

$200 doe 

Made redundant last week, rip 

#ITlyfe

Edited by UNR33L

Yeah really small (3 of us total) and basically lost a couple of big ish customers over Christmas / New Year due to them down sizing or cutting cost, selling business etc. 

So back on the job hunt, got a few good leads already which is awesome.

Paid out but not much (only here for about a year)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...