Jump to content
SAU Community

Recommended Posts

Got any good maintenance hacks?

I've heard that using toothpaste on your headlights can be awesome at getting them shiny again.

Or, a rag around the head of a small screwdriver to clean in between cracks/seats etc.

A small foam painters brush can clean your vents.

Whatchoo got?

Link to comment
https://www.sau.com.au/forums/topic/460248-car-maintenance-hacks/
Share on other sites

Egg in radiator to block pin hole leaks.

Degreaser on rags can help remove stubborn stains on the paint work. Works great on the bumper.

Toothpaste to clean headlights works but its more expensive than buying a proper plastic lens cleanser. You don't need the kit.

Edited by SargeRX8

Want to drain the coolant out of your coolant overflow reservoir?

1. Remove hose on radiator side

2. Point away from the bodywork of the car and towards to ground, preferably into a container

3. Find the breather hole on the overflow reservoir.

4. Find a length of hose that fits snugly into the breather hole. The better the fit, the easier the next step

5. Blow into the hose, the air will force the coolant to start running out of the other end into you container on the ground and will continue to do so until it is pretty much entirely drained

6. Finish off your coolant replacement procedure.

7. Rip skids :D

I've heard that using toothpaste on your headlights can be awesome at getting them shiny again.

So what sort? Sensodyne to take away the aching headlight?? Or Colgate with flouride to stop any further decay? Actually we used to use toothpaste on the old Suzuki 'waterbottle' two strokes speedo and tacho cover because they always went yellow and faded, that was back in the '70's.

If your into metal polishing and you want to polish a pipe or your s/s muffler etc then an old woolen footy sock used with metal polish works great. You wrap is around the pipe and push/pull backwards and forwards.

The best thing for cleaning your dash facia surround [the part that feels like shark skin] is an old worn out face washer/flannel. One of the good qual older ones, they don't leave lint or wear out if used properly.

I also swear by Selleys All Clear for a flexible gluing agent for badges, side skirts and other such stuff.

Otherwise its cable ties and race tape!!!

  • Like 1

So what sort? Sensodyne to take away the aching headlight?? Or Colgate with flouride to stop any further decay? Actually we used to use toothpaste on the old Suzuki 'waterbottle' two strokes speedo and tacho cover because they always went yellow and faded, that was back in the '70's.

I can't answer that. How sensitive are your lights to hot and cold?

Want to drain the coolant out of your coolant overflow reservoir?

1. Remove hose on radiator side

2. Point away from the bodywork of the car and towards to ground, preferably into a container

3. Find the breather hole on the overflow reservoir.

4. Find a length of hose that fits snugly into the breather hole. The better the fit, the easier the next step

5. Blow into the hose, the air will force the coolant to start running out of the other end into you container on the ground and will continue to do so until it is pretty much entirely drained

6. Finish off your coolant replacement procedure.

7. Rip skids :D

Not the same, but last time I changed coolant. I opened drain screw on radiator and with a tridon radiator cap with pressure release slightly open, cap still on. It sucked the entire coolant system dry through the drain screw, reservoir and all. Never had this happen before.

Superfine steel wool "0000"

Do all your external glass. Comes up crystal clear and gets everything off.

Then use rainex - wax on, wax off :D

It's also used to do French polishing on wood between coats so trust me when I say it does NOT scratch glass.

I wouldn't use it on all my cars if it did.

  • Like 3
  • 1 month later...

Here's an easy one, buy a $2 funnel from Super Cheap and cut the nozzle off just above the threaded section, it will now screw into Skyline and other Nissan oil fill ports.

Thats awesome!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...