Jump to content
SAU Community

Recommended Posts

Ok a bit off topic but might be relevant to the January track day too ... I'm heading to Sandown this coming Sunday and the current forecast is 35, ouch.

Any specific prep I should look at doing for such a hot day? I've got Defis for oil and water temps so will be watching those closely.

Does anyone know how R888's go in the hot (standard GG compound)?

Also would i be able to wear a dirtbike helmet for this? or will i need another type of helmet

If I were you I would get a different type, scrutineers can be a little strange with them.

Ok a bit off topic but might be relevant to the January track day too ... I'm heading to Sandown this coming Sunday and the current forecast is 35, ouch.

Any specific prep I should look at doing for such a hot day? I've got Defis for oil and water temps so will be watching those closely.

Does anyone know how R888's go in the hot (standard GG compound)?

Check your brakes are in good condition and you've got good brake fluid too.

Do the licenses you can buy on the day allow you to enter the Timed sessions or just the non-timed? Just asking as the come and try licences in the Supp Regs are a different level to the normal Level 2S ones we have...

DRIVER ELIGIBILITY
All drivers must hold a current CAMS Level 2S licence or higher and be a financial member of a Club affiliated with CAMS in Victoria.
Come and Try Level 1 Licences will be available to eligible participants, see CAMS website for further information

Do the licenses you can buy on the day allow you to enter the Timed sessions or just the non-timed? Just asking as the come and try licences in the Supp Regs are a different level to the normal Level 2S ones we have...

DRIVER ELIGIBILITY
All drivers must hold a current CAMS Level 2S licence or higher and be a financial member of a Club affiliated with CAMS in Victoria.
Come and Try Level 1 Licences will be available to eligible participants, see CAMS website for further information

It's at the discretion of the Clerk. However we will be grouping Level 1 license holders in the social group(s) with no timing.

It will be a discussion if a level 1 license holder would like to go up into a timed group.

Good question Brett,

I will check and get someone to reply.

It's at the discretion of the Clerk. However we will be grouping Level 1 license holders in the social group(s) with no timing.

It will be a discussion if a level 1 license holder would like to go up into a timed group.

Thanks Collins / Richo,

Was thinking they would be separated at the start of the day so I can let people know and that there may be a possibility of getting into the timed groups at the discretion of the clerk...

Thanks Collins / Richo,

Was thinking they would be separated at the start of the day so I can let people know and that there may be a possibility of getting into the timed groups at the discretion of the clerk...

Badically, if head screwed on. They'll have a chance of getting into the timed groups.

Ok a bit off topic but might be relevant to the January track day too ... I'm heading to Sandown this coming Sunday and the current forecast is 35, ouch.

Any specific prep I should look at doing for such a hot day? I've got Defis for oil and water temps so will be watching those closely.

Does anyone know how R888's go in the hot (standard GG compound)?

If you don't have an oil cooler, you're gonna have a very bad time. Once you see oil temp hit 120 back off as it's gonna climb top 130-135 before it starts to come back down.

R888 will be fine, you'll run outta oil (and/or brakes depending on setup) before the tyres will give out

  • Like 2

And EVO is booked into Import Monster's new service factory with a loooong ass list of shit to do.

I should be a starter for Jan 30 now, need to lock in a tune somewhere in Jan however.

If you don't have an oil cooler, you're gonna have a very bad time. Once you see oil temp hit 120 back off as it's gonna climb top 130-135 before it starts to come back down.

R888 will be fine, you'll run outta oil (and/or brakes depending on setup) before the tyres will give out

Cheers. I was trying to get the cooler sorted this week but ran out of time, aiming for early Jan hopefully. Fingers crossed I don't cook it on Sunday.

Badically, if head screwed on. They'll have a chance of getting into the timed groups.

i like that plan as you would definitely want them to know what they are doing before putting them on the track with the guys trying to cut good lap times... :D

And EVO is booked into Import Monster's new service factory with a loooong ass list of shit to do.

I should be a starter for Jan 30 now, need to lock in a tune somewhere in Jan however.

Then prepare your ears for tyre squeal and bulk understeer, or has it still got the oem suspension package?




  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...