Jump to content
SAU Community

Recommended Posts

How is this possible i cant get more than 405rwkw turbos apparently outa puff ... built motor fair bit of head work although std actuators and inlet. I call bs unless huge intake work

Fuel

Exhaust

Intake mods

Cams

Head work

It can be done, but the right parts need to be employed.

List everything...

Once the turbos are out of flow you can then make more power by using what they flow more effectively/efficiently like comp ratios and cam timing etc

E85 helps here to

but how will the exhaust gases get past the 2x restrictors?

unless you twin externally gate them.... then you might as well just get a single :)

  • Like 1

But don't you get into issues of spinning them too fast with a bang to follow?

Depends on engine size really, 30psi on a 2.8 will make them spin to fast, 2.6 not so much but yeah still getting up there

Also by making the engine run more efficiently means the turbos don't have to work as hard for the same power

but how will the exhaust gases get past the 2x restrictors?

unless you twin externally gate them.... then you might as well just get a single :)

I have made 458awkw from GT-RSs on my 3.0 which run the same exhaust as -5s and Piggas has made 473rwkw with -5s on a 2.8 and I have been talking with a dude the has made 716rwhp from -10s on a 2.6 so I guess it comes down to how much power you want to make

you "could" do this.. 3" dump -> Cat (because we are sensible) -> 3.5" Cat Back... plumb gate back into 3.5" cat back.. bypassing the cat :)

legal enough.. at EPA they won't be cracking gates.

What was the cause for yours to hand grenade

Who knows, bearings were perfect, no oil stavation or heat damage apparent. Running 26 psi on a built 26.

Everyone threw their arms in the air, no one's fault and said show me the money for a rebuild. [emoji19]

Going single also can be risky if your not willing to external gate to atmosphere, i know people who plumbed back gate into 3" exhaust and wonder why its a laggy pig.

That's not risky, that's stupidity. Change 3 inch to something that belongs on there. I bet everything improves.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...