Jump to content
SAU Community

Recommended Posts

Have you tried searching? just in case somebody has done this before and already put all the info on the internet somewhere. long shot, but you might get lucky.

but you can basically just get any turbo you want and bolt it straight on, the engine/ecu will compensate and make magic happen!

I had a 25de Neo in my old 33 and I turbod it on my green p's. All I did was source out all the stock parts so, side mount inter cooler, stock 25 turbo, as much of the stock piping as I could get and that was it. I already had the det ecu but you will need that aswell. In total I think everything cost me $300 but I also paid a mechanic friend to install it because I didn't want the hassle of tapping holes for the oil lines etc

Sell your car, buy a turbo car spend money and time (that was saved for the turbo conversion on the N/A) and make the turbo car faster.

Adding a stock RB25DET turbo to a RB25DE Skyline to be still slower than a stock Golf GTi, heck even a Golf GTD is not worth the effort, time, money.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
×
×
  • Create New...