Jump to content
SAU Community

Recommended Posts

Lel discussion time.

I run BCPR6ES-11 (1.1mm gap) with Yellow Jackets. Standard RB26 motor standard boost. Works fine, no issues, even when overheating during a track day.

If you're on a budget or have a standard engine, yellow jackets are fine.

From the consensus around here, if you're pushing you're engine towards 300kW, best to go OEM coils and 7ES plugs.

^^lol. You can lookup the SAU yj feedback thread if u can find it. I wonder where it went. Rolls eyes. To op, buy what your budget allows for but remember you get what you pay for and poor man often pays twice. Splitfires can be found for around 550 and OEM around the 600 mark. The decision is yours. China or Japan.

You can get YJs for only $400 including express post. I have them in stock and post daily. These are actually really good for high boost applications despite what others say.

OEM and Splitfire are too pricey due to middlemen markups and over-inflated wholesale prices.

YJs have been on the market for around 7 years now. Ive sold heaps to thousands of people all over the world.

There's tons of positive feedback on them. Here's my ebay feedback to prove it - see here

Nothing but good comments on the YJs and Im also a trader here on SAU.

Buy YJs direct from the manufacturer (ME) and save your hard earned for other mods.

I am a trader on SAU and I have every right to sell and promote my products.

in the appropriate 'for sale - traders' section. Keep flogging your horse in the open forums and expect to get hosed; pls no more tears when you do.

To OP re spark plugs, everyone says use coppers and just change them more, but I've had less misfires/smoother idle with iridiums, and they've last me frkn years, and work out better value. So not really any reason to pay less and have to keep changing plugs IMO, but up to you of course.

in the appropriate 'for sale - traders' section. Keep flogging your horse in the open forums and expect to get hosed; pls no more tears when you do.

I have no idea what you are talking about? Im not into flogging horses? Sounds gay,

To OP re spark plugs, everyone says use coppers and just change them more, but I've had less misfires/smoother idle with iridiums, and they've last me frkn years, and work out better value. So not really any reason to pay less and have to keep changing plugs IMO, but up to you of course.

My tuner told me to get PFR7G- for best results with tune. Done about 2 years on them so far.

Middle men, manufacturers? I think these guys are ripping off your brand mate. lol. hope u got a patent on that colour. They even offer 24 month quality warranty.

http://www.ebay.com.au/itm/222124001105?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...