Jump to content
SAU Community

Recommended Posts

8 hours ago, usmair said:

Can only work with what we've got.......

Umair , it was great to get your info, what I meant , if it had been the 6266 it would have made the 8374 low end response look even better , but I think the top end would be pretty close with both turbos

Umair,

I took the liberty of converting your results to excel and graphing them vs my pumpgas results (including corresponding boost curves). Looks like my combo of stock-bore 79mm stroker (2.75L) and/or the .92 IWG housing turbo is making a bit more bottom end than yours (below 4500 rpms), but obviously with higher boost and E85 you're crushing me anywhere over that. The boost is x10 for scaling purposes (ie 100 = 10 psi, 200 = 20 psi, etc). I'm willing to bet when converted to E85 and when I start pouring on the boost that I will make more power lower in the rpms, but not significantly so (maybe 250-300 rpms sooner), and with the increased backpressure of the .92 housing I'd bet I'll start dropping sooner as well.

Good looking dyno! :1311_thumbsup_tone2:

 

Dyno comparison to Umair.JPG

  • Like 2
Not really surprised there though. Bigger engine making more grunt down low.

How long till you put it on E85, Harris? 

Station is targeting completion in november. I'm hoping to have fuel pumps, 3.5" exhaust, and mega huge injectors done by then. I'm still on stock fmic so we will see what it can flow!

will need 100m cooler. the stockies have been known to hold power back over 400kw.

3.5" will do the job. Mine is 3.5". 4" only if you know you are going to aim for even bigger power in the future.

My injectors are 2000cc. I was told that even 1600cc on e85 wont cut the mustard for 500kw. Makes it a little harder to fine tune but its not noticeable in day to day drive.

thanks for mapping the dynos. interesting stuff!

  • Like 1

If anyone is interested, I'm maybe going to the SAU cruise to the Gosford car museum on Sunday.

Happy to take anyone for a spin so they can feel the setup for themselves.

Edited by usmair
if you need pricing on Plazmaman coolers @usmair give me a holla [emoji4]


What about me? Sounds like he's got a cooler.

I'm almost tapped on money these days (oilfield sucks here lately). I need a sponsor!
43 minutes ago, HarrisRacing said:


What about me? Sounds like he's got a cooler.

I'm almost tapped on money these days (oilfield sucks here lately). I need a sponsor!

haha but you're in the US.. shipping won't be cheap.. however happy to help out - flick me a PM on which size cooler your after, and if polished/black/raw etc..

What range of mph would you expect to get from 500kw 

 

138-140mph??

I would hope! Thats a ton of power. I ran 120 mph on 464 whp and you've got way more midrange.

On 9/3/2016 at 11:53 PM, Piggaz said:

Borg Warner EFR Series Turbo's V 2.0

 

Link to the first attempt. A wealth of knowledge in it. 

annnnd go!

We gonna be factual on this or its gonna b like the last one >_<

What wasn't factual in there? 

You must have some EFR experience to share with us if you know there was nothing factual in there? 

 

 

Edited by Mick_o
  • Like 2
On 9/10/2016 at 10:00 PM, Mick_o said:

What wasn't factual in there? 

You must have some EFR experience to share with us if you know there was nothing factual in there? 

 

 

at the end of the thread which got it locked . 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...