Jump to content
SAU Community

Recommended Posts

Yeah I understand the price changes due to the exchange rate and international market ( I passed up a 4b vspec 34 for 42k landed and complied via the auctions 2 years back and bought a 32 instead.. now you'd be lucky to get one for double that). I was just pointing out that it isn't fair to use them as direct examples to guage a price for a local sale. Plus we all know what cars are advertised for on carsales doesn't mean a whole lot haha 

  • Like 2
14 hours ago, Aussie_Delivered_R32_GTR said:

This 10,000km R34 sold for 7,050,000 JPY.

http://www.exportcar.jp/en/component/auctstat/?view=auctstatdetail&id=lHWYgeH5dNAs8Nm

That's over $120K........ Landed/Complied and Registered.

Good luck finding an R34 with less than 10,000 kms for $70K.

That boat sailed a long time ago.

 

Cheers for the informative post Bob!

Have you talked to Iron Chef Imports about exporting this car to a Canadian buyer?

I personally would like this car to stay in Australia as Prank alluded to; but as Bob said, collectible GT-Rs are attracting international dollars.

So as Iron Chef here is known as Iron Block over there, that avenue can be explored. 

Case in point:- A R33 GTR N1 left Australia for Canada last year. And roy8532 here on SAU is sending R33 GTR parts to Canada every week or two. 

I missed the previous thread, and you were probably asked to supply, but do you have DeReg papers to prove those K'S?

Massive asset and essential to you getting top dollar, particularly as the digits on the odo are slightly wonky.

 

17 hours ago, DJBarnstar said:

I missed the previous thread, and you were probably asked to supply, but do you have DeReg papers to prove those K'S?

Massive asset and essential to you getting top dollar, particularly as the digits on the odo are slightly wonky.

 

No idea what DeReg papers are. So probably not, unless they come standard with the car.

Post the VIN no. I'm sure someone will dig something up. 

Aussie_delivered posted about a R32 GTR with 14,000kms not long ago that sold for around $80k. If this car is genuine, You could hope for similar results.

 

 

On 10/22/2016 at 2:22 PM, admS15 said:

So you where offered 40k and didn't take it,someone said you could get 70k. What would you actually take for it?

If 70k is the best offer after a few weeks, then I'll happily sell it for 70k. If someone offers 100k, i'll sell it on the spot.

 

On 10/22/2016 at 2:30 PM, dyl33 said:

Post the VIN no. I'm sure someone will dig something up. 

Aussie_delivered posted about a R32 GTR with 14,000kms not long ago that sold for around $80k. If this car is genuine, You could hope for similar results.

 

 

There is a photo of the VIN number in the original post.  It reads: 6T91MPV97X2BFX023

Hi.

What a great car.  I own a series 3 just like yours in similar condition but with much more KM, and to give you an Idea I wouldn't sell mine
for 40k even if I needed the money.

With a small number of Series 3's built, and with the KM's yours has you should be in no rush to accept offers.
I would give it a while and put the word out in a few other places, then once you attract a GTR Diehard then you can get some 
good money for it.

12 hours ago, RB335 said:

Hi.

What a great car.  I own a series 3 just like yours in similar condition but with much more KM, and to give you an Idea I wouldn't sell mine
for 40k even if I needed the money.

With a small number of Series 3's built, and with the KM's yours has you should be in no rush to accept offers.
I would give it a while and put the word out in a few other places, then once you attract a GTR Diehard then you can get some 
good money for it.

Great

Thanks for taking the time to advise mate 

Wow...awesome car I would never let that go. I've always been sceptical of GTRs and their kms, when I bought mine it was purely based on the condition of the car and how it drove.  In saying that your GTR looks immaculate and you'll definately get a good price for it.  

I can tell you now (that I have bought one) that the cheapest, I could get an R33 LM Limited landed and complied in Australia was 59k. 

I looked at every single LM Limited for sale in the last 10 months. The price of this model has skyrocketed, to the point where I was genuinely considering just buying a 34 because that was easier.

As with all things, it's finding the right person, but I would not be parting with this car for less than 70k. The prices of good quality GTR's is on the rise (I've experienced it myself in my short search). This car, with these km's is going to be worth a considerable amount. I would expect that this car will be picked up by a collector and stored.

Good luck!

 

  • Like 2
On 10/31/2016 at 3:24 PM, Steve85 said:

I can tell you now (that I have bought one) that the cheapest, I could get an R33 LM Limited landed and complied in Australia was 59k. 

I looked at every single LM Limited for sale in the last 10 months. The price of this model has skyrocketed, to the point where I was genuinely considering just buying a 34 because that was easier.

As with all things, it's finding the right person, but I would not be parting with this car for less than 70k. The prices of good quality GTR's is on the rise (I've experienced it myself in my short search). This car, with these km's is going to be worth a considerable amount. I would expect that this car will be picked up by a collector and stored.

Good luck!

 

Thanks! I would love to be offered 70k for it. The highest price I've been offered is still 40k. 

To anyone reading:  Offering 70k puts it on the market, with the knowledge that i'll still be taking offers for a few more weeks to find a better price. If there are no better offers, it'll sell for 70k

Edited by JasonToniolo
  • 2 weeks later...

@JasonToniolo here's something for you to keep an eye on

 

http://prestigemotorsport.com.au/auction-vehicle-display/?car_id=68zpG2CZVf1tpqR

-edit- Upon further investigation, it looks like the speedo has been changed so we'd need to see dereg papers to confirm the kms. 

 

 

Edited by ShortCircuit
  • Like 1
  • 3 weeks later...

What about taking a pic of the screws that hold the cluster in to see if there's signs of previous removal?? I.e scratches all over the screws would indicate its been removed at some point? Obviously this doesn't always mean someone has tampered with the odometer.

f98a7de619244ac111eb0431fd7d6db5.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...