Jump to content
SAU Community

Issue with alternator/headlights

yUBER

By yUBER,
in General Maintenance

 Share

Recommended Posts

yUBER Contributor

yUBER

Posted
Posted
Issue with alternator/headlights

So my r32 gtst is having this problem where my car batteries would die the next day so i changed the car batteries 3 times and the problem persist. I figured maybe it was my alternator so i got a multi-meter and tested it the numbers coming in were in the normal ranges. I tried all the load test and they came back normal but the one thing i noticed was when i had my headlights on and i revved the car the voltages would drop on the meter down to not so normal ranges around 12 volts. On idle everything is normal but when i rev up the car around 1500-2000 it goes down only when headlights are on any idea what could be the problem?

Link to comment
https://www.sau.com.au/forums/topic/469387-issue-with-alternatorheadlights/
Share on other sites
89CAL Grand Master

89CAL

Posted
Posted

Why say "I got normal numbers"? wouldnt it make more sense to give actual voltage readings? not trying to be rude but perhaps they are not normal numbers.

It sounds like the altenator is not able to keep up with high load, so above statement is possibly correct. More info needed

tridentt150v Grand Master

tridentt150v

Posted
Posted

flux capacitor needs replacing...lol

Take the alternator out and get it checked by an auto sparkie shop....they have the best test rigs for this and generally they will test for nothing or at worst nominal cost.

yUBER Contributor

yUBER

Posted
  • Author
Posted

Sorry i assumed people would know what normal voltage readings is if they knew about what i was talking about lol. The voltage reading is around 13.90v-14.30v on idle no load with load 14.11v - 1370v with headlights on only it idles about the same but when revving the engine it drops too around 12.38v. Probably is the alternator thanks for the quick response.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted
On 04/03/2017 at 7:33 PM, Robzilla32 said:


This - you haven't installed an amp recently? Probably obvious but I did this recently and the battery was draining super quick.

I was actually trying to diagnose issues with HICAS, upping the earth strap definitely helped. But yes I have an amp (two actually haha).

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...