Jump to content
SAU Community

Recommended Posts

E85 Fuel Consumption

General question around what level of consumption people are seeing when running E85. 

I had a fairly full tank when I went for a cruise on the weekend through the hills, did about 175-200ks or so and had about quarter of a tank left (R34 GT-R with around 350rwkw). 

When I did a track day I had a full tank plus 80L with me and ended up with around half a tank left in the car and all jerries emptied after 5 or so 8 lap sessions of Winton, so 25 or so k's per session?

I can run the car on 98, but of course less power etc, but I'm just curious what others are seeing as I'd like to do some longer cruises and I'm thinking I might only be able to do so on 98. 

There's very little E85 around here too (Regional Victoria) so I keep a 200L barrel in the shed :D

 

 

Link to comment
https://www.sau.com.au/forums/topic/469596-e85-fuel-consumption/
Share on other sites

That sounds about bang on what i got from a run out of town for an overnight stay, just cruised out at 100km/h and cruised back. 

So realistically 20-25L per hundred is not unusual at all when having some fun? 

This was the main reason holding me back from going E85, a range of ~200km is frankly ridiculous. I know that flex fuel would address that but I'm too cheap to pay for all the required tuning.

It's crazy days when a Tesla is quicker off the mark and has better range than our cars ... once they address the weight and price, see you later. 5-10 years max.

Didn't say it was bad, just wanted to know what others are seeing so I know if it's about right. 

I made the choice to run e85 for the advantages and can switch at any time. 

Cams will be no different, so pro's some con's and all good :)

3 hours ago, Hadouken said:

My 33 got 12l/100 on the freeway. And about 20l/100 at the track.

Norm was 14 odd /100

I did 24 laps at Mallala yesterday, plus a couple more getting on and off the track. I used around 60 litres of E85, so almost 100L/100Kms.

17 minutes ago, GeeDog said:

I did 24 laps at Mallala yesterday, plus a couple more getting on and off the track. I used around 60 litres of E85, so almost 100L/100Kms.

What sort of setup have you got?

33 minutes ago, GeeDog said:

I did 24 laps at Mallala yesterday, plus a couple more getting on and off the track. I used around 60 litres of E85, so almost 100L/100Kms.

Mine's an economy car by comparison.  Seems to consistently run about 60l/100km.  Not running ethanol though. I'd expect that to increase by about 30 percent on E85.

 

 

2 hours ago, Dale FZ1 said:

Mine's an economy car by comparison.  Seems to consistently run about 60l/100km.  Not running ethanol though. I'd expect that to increase by about 30 percent on E85.

If you consider that 4 of the 24 laps were "out" laps (so 1/2 pace to the start line), and 5 of the other 20 laps were on a wet track, the 15 laps at full noise probably used well over 100L/100Km. 

 

3 hours ago, Piggaz said:

What sort of setup have you got?

R33 GTST, highflow, ID1000s, Nistune, E85 etc

It's always 30-35% less range than equal driving on 98 ;)

If you really want to get sad, get a high stall torque converter, and then take *that* to the track!
When I was running my engine in, I managed to pay United something like $770 of fuel in 5-6 days.

Nowadays I am back on 98 because United's violent price gouging rustles my jimmies.

E85 I get 270-290km per tank (60-65L), general mix of daily driving with some cruising and some squirting. P98 I was getting around 400km per tank give or take a bit depending on heaviness of right foot. On the track with E85, 1l per kilometre isn't far off the mark when going full noise constantly. Agree with Greg about united violent price gouging, went from 119.9 to 139.9 in the space of 2 weeks. Carnts. I have flex but reluctant to poor 98 in. Stock RB25 with highflow, nismo 740cc dinosaurs making 312rwkw btw.

It rustles my jimmies that adding 10% ethanol brings 91 down from say $1.25 to $1.20

But if you add 85% of it, the price is suddenly $1.39..

Can I buy the ethanol they're putting into the E10? It's clearly cheaper than the 91...

Well seems my car is about on par with what everyone else is seeing so fair enough. Will just have to run 98 for the longer cruises. 

I'll just have to put a big fuel cell in the boot for some extra capacity lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...