Jump to content
SAU Community

Recommended Posts

Got the airbox mod 3d printed and temporarily screwed it on as it's only minimum infill for trial. 

Fits perfectly and the cold air inlet sits just outside the main frame rail. 

Also modified the power steering reservoir by making my own bracket as it didn't clear the bonnet when closed in the stock one. 

IMG_20190301_175923.jpg

IMG_20190301_194538.jpg

IMG_20190301_194559.jpg

IMG_20190301_194515.jpg

  • Like 2

So I got it going today but have a few issues.

Turbo coolant hose has split, kinda knew it would.
Power steering keeps leaking at the pump so just going to use the old setup
Crank position sensor is throwing a code so it could be f**ked
It keeps overheating. Doesn't matter what I do, i can't get it to not overheat.

Edited by Sack87
1 hour ago, TukeH said:

Whats that strange cliking sound is? 

When the water hits the power steering belt it makes that weird noise. You can see the water spitting out of the radiator neck. Took me a few minutes to figure out what it was haha

Edited by Sack87
  • 2 weeks later...
17 hours ago, Akshunhiro said:

Nice work with the airbox. Would you mind sharing the STL? Or, can I buy one off you? My 3D printer is still waiting to be assembled haha.

Let me test it out first to see how it goes with the heat, then I'll look at selling the STL file if it doesn't melt haha

It only just fit on the Makerbot Replicator bed so yours needs to be the same size. 

So I got the coolant bled to a point where I could drive it without overheating and run the engine in for 100km.

Installed a GFB G Force 3 boost controller on a little bracket I made up that fits in the vent. I can monitor AFR later on when I put another sensor in and protect the engine incase it leans out. So many cool features with this unit. 

Also had a mate dip the grill in carbon fibre. Came out really good and matches nicely with the ARX kit. 

IMG_20190315_092023.jpg

IMG_20190315_092041.jpg

IMG_20190315_092208.jpg

  • Like 4
  • 3 weeks later...

I haven't had much luck with the car as of late. Noticed there was engine oil coming out from the bell housing and whilst under there, I also noticed oil coming from the turbo between the cartridge and turbine housing. 

Pulled the box out haphazardly as I didn't have a hoist and pulled the turbo back off too. I cut the rear main seal by accident when installing it on the stand without being able to see the back of the crank. Turbo went back to MTQ for warranty and they reckon nothing was wrong but replaced the oil seals. 

Fitted new rear main which is an absolute f**k to get in there and box and turbo back in for test drive. 

I put new viscous oil in the fan hub last night and it works/sounds like it's moving a lot of air now. Went to go for a drive, look under the car for leaks after putting it all back in andddddddd oil is pissing out of the turbo feed banjo. FML. I checked every fitting was tight before I put it back in so MTQ have done something there. 

So today I started pulling the turbo back off again to fix that. 

20 minutes ago, andynogo said:

Yeah... It's one thing after another hey. Keep on trucking- you'll get there! Half price boost night 17 April at whoop ass... Might be a few of us going...

I would but i'll be on arvo shift. I plan too make it down there soon before seasons end.

So it's back in business, no leaks so much success. 

Hob drive still says its overheating though but the gauge does not move whether it's 75 or 105.

The new fan oil helped a bit but I think it might be a faulty sensor. 

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...