Jump to content
SAU Community

Recommended Posts

1 hour ago, Robzilla32 said:

This thread used to be interesting but now it's dull. Can someone chuck some turbo(s) in a car already and report back (preferably with skid vids)

Or run some laggy twins and blow the 2nd turbo 

46 minutes ago, acsplit said:
3 hours ago, Super Drager said:
Call hypergear... pay him x amount of dorrah... say you want x amount of hp. Recieve turbos... install.. post result

Nah don't do that. Plenty of good turbos on the market

Of course like GT-RS turbos. Comes on at 5700rpm and quickly shift before you 

1. Smash the limiter because you have a "great" powerband OR

2.shift too slowly and fall off boost.

Amazing :)

 

  • Confused 1
On 1/12/2018 at 5:50 PM, frakzz said:

What is the difference in the number of blades in the turbine wheel? 9,10,11?

To answer your question, it will slightly change the efficiency of it. Depends on the design. What it won't do is make it a multiple times better, eg 11 blades isn't 10% more flow than 10. Remember the more blades you have the more volume inside the compressor is blade. Doesn't help.

Flow is still a function of area and a number of other factors so number of blades is only going to have an smalll change in the characteristics of the compressor. Realistically an optimum design is going to take account of the operation parameters, the housing size and shape as well as the blade design. because garrett or whoever uses x blades in y new design, doesn't mean that x blades will be better in an older, different, compressor.

what wheels should I try?)))

these will definitely work
Inducer Dia. : 46.52 mm
Exducer Dia. : 60.13 mm
Extend Tapered Tip Exducer Dia. : No Extend Tip
Overall Height : 24.50 mm
Trailing Angle : 45 Degree
Blade : 6+6

Inducer Dia. : 47.10 mm
Exducer Dia. : 60.13 mm
Extend Tapered Tip Exducer Dia. : 64.98 mm
Overall Height : 29.50 mm
Trailing Angle : 45 Degree
Blade : 6+6

Inducer Dia.: 49.62 mm
Exducer Dia. : 61.98 mm
Extend Tapered Tip Exducerdia : 65.90 mm
Overall Height : 27.63 mm
Trailing Angle : 60 Degree
Blade : 6+6

You need to use only one wheel with an inducer of 62.6mm and an exducer of 83mm mated to a turbine with a 74mm inducer. Preferably in a twinscroll housing.
I can't be more specific as I don't have all the details on these wheels but they seems to perform very well on RB26.

  • Like 2

I dont know why you are asking? You haven't listened to anything anyone has said all along ?

If they are gunna work use them and post your next failed result! 

I will say this AGAIN.... NONE OF THIS SHIT WILL WORK! So just get over it and buy a single! 

 

  • Haha 1
7 minutes ago, R_34 said:

You need to use only one wheel with an inducer of 62.6mm and an exducer of 83mm mated to a turbine with a 74mm inducer. Preferably in a twinscroll housing.
I can't be more specific as I don't have all the details on these wheels but they seems to perform very well on RB26.

I like the way you think! ?

Starts with E and ends in R 

37 minutes ago, frakzz said:

what wheels should I try?)))

these will definitely work
Inducer Dia. : 46.52 mm
Exducer Dia. : 60.13 mm
Extend Tapered Tip Exducer Dia. : No Extend Tip
Overall Height : 24.50 mm
Trailing Angle : 45 Degree
Blade : 6+6

Inducer Dia. : 47.10 mm
Exducer Dia. : 60.13 mm
Extend Tapered Tip Exducer Dia. : 64.98 mm
Overall Height : 29.50 mm
Trailing Angle : 45 Degree
Blade : 6+6

Inducer Dia.: 49.62 mm
Exducer Dia. : 61.98 mm
Extend Tapered Tip Exducerdia : 65.90 mm
Overall Height : 27.63 mm
Trailing Angle : 60 Degree
Blade : 6+6

No one knows what will work as you are in uncharted territory, you’ll have to just be the test subject 

28 minutes ago, r32-25t said:

No one knows what will work as you are in uncharted territory, you’ll have to just be the test subject 

You're a twins guy maybe you should offer him some advice? Pretty sure you've thrown some Frankenfail ideas around here before? What would you recommend he tries next? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...