Jump to content
SAU Community

Recommended Posts

7 minutes ago, KerrodR33 said:

R.i.p.s or spool 3.2L?

 

Going the 30 bottom end route for cost and strength to avoid having to buy an N1 block. Aiming for 750awhp

Ive been a big fan if RIPS rb30. Its tried and proven  he has also been doing them for decades. 

Should email him and ask for a custom quote to your specifics. 

  • Like 1

The only argument I can see for buying a built motor is time.  it usually takes twice as long as you think and then a bit more to build your own (sometimes years!) but if you are not in a hurry then probably go with your own build.

  • Like 1

Yeah you'll only save in time. Ultimately unless you are DIY'ing yourself you have to trust someone external to you anyway. Whether thats the seller (who is usually another customer) you're still trusting *a* machine shopt or *a* builder whether you deal with them directly or indirectly.


I'd personally prefer a motor that's done ~25,000kms and a few track days/many dyno runs and is still holding together just fine like mineeee... over one freshly built anyway. Reputation tends to matter a lot with these things. In 2018 it's really hard not to argue just ordering a RIPS RB30 bottom end as soon as you buy any R chassis and have it ready to go and it'll be all you need.

On 12/03/2018 at 7:39 AM, Leroy Peterson said:

Soon N1 blocks will be comparable price to billet blocks

Yet a probably the weakest out of the bunch. I think the big power cars starting to use modified rb25 blocks to suit rb 26

 

Another Platinum 4WD RB25 converted to RB26 block hitting the streets... many more in the pipleline. Why? Because better than a N1

Platinum Racing Products After vigorous testing we have finally established that the N1 block is a poor casting yes.. We have come up with a far better solution 1f642.png:)

And sorry to tell you, but the N1 is a complete waste of money, they crack as fast as if not faster than a 05U

 

 

 

  • Like 1
1 hour ago, Kinkstaah said:

Yeah you'll only save in time. Ultimately unless you are DIY'ing yourself you have to trust someone external to you anyway. Whether thats the seller (who is usually another customer) you're still trusting *a* machine shopt or *a* builder whether you deal with them directly or indirectly.


I'd personally prefer a motor that's done ~25,000kms and a few track days/many dyno runs and is still holding together just fine like mineeee... over one freshly built anyway. Reputation tends to matter a lot with these things. In 2018 it's really hard not to argue just ordering a RIPS RB30 bottom end as soon as you buy any R chassis and have it ready to go and it'll be all you need.

Unless you have a R32. no RB30 blocks there :P

As far as N1 blocks go, from what i've seen from someone cutting up a stuffed RB26 block and then comparing the UT thickness tests from a N1 block, it is thicker in certain areas, and not in others. Depending on what you actually have fail will it could be an upgrade or no better.

When bmw wanted a block for their f1 engines, they used a moderate km used block from their road cars. The though was that the engine would have shown any stress by then.

A non n1 block would be my choice with a build; either rb26 or rb30. They are tried and proven for decent power without grout filling. 

7 hours ago, sneakey pete said:

Unless you have a R32. no RB30 blocks there :P

No problem for Kiwi ingenuity - I have seen a couple of RB30 powered R32s here and I am sure there are more around...

 

  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...