Jump to content
SAU Community

Recommended Posts

Ok need help peeps about to turbo my r34 na rb25de running auto ecu just converted to Manuel can i use auto na ecu and piggyback a emanage ecu for timing fuel and air etc seen people saying auto box gives out etc as ecu for box is 1 aswell but im manuel now? Do i need a nistune or no? Stock boost gtt injecters 255pump etc ?

received_1717788698341275.jpeg

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/
Share on other sites

Nistune would be smarter than any piggyback crap.  The NA ECU should be able to do what you need - doesn't matter that it was auto.  Nistune will actually help you to get rid of codes that the ECU will probably throw from not having the auto's TCU on-line.

If you have to buy injectors, don't buy stock DET injectors.  Buy some brand new Bosch injectors (or similar) from Scotty (or similar).

Any big pump will do.  The 255 is reasonable, but there are newer Walbros that better suit E85, for some future proofing.

If you do use Nistune, grab a Z32 AFM, or an R35 blade AFM and fit that instead.  No point hamstringing yourself with the NA RB25 AFM.

And upgrade the brakes.

And fit an LSD.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881579
Share on other sites

The emanage kit comes with loom etc all that and can plug straight into my laptop ..can i do that with a nistune? Looking fo cheap option as will get det soon so was thinking emanage n tune my self all under 500 where as nistune is 400ish yeah? Then pay for a tune?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881587
Share on other sites

11 hours ago, AngryRB said:

I run flex fulltime with no issues, i can check knock and sensors are working and is easy for my tuner to play with.

Does the job for $600.

You mean you run E85 full time.

PowerFC can't even cut power when you're above a particular load point, it can't even cut power when you've exceeded a particular engine water temperature.

I think you need to admit now that it is a pretty basic ECU.

Nistune can do full flex blending (PowerFC cannot), Nistune has basic engine protection (PowerFC will grenade your motor), Nistune you can vary your VCT (PowerFC you cannot), Nistune has launch control (PowerFC does not have), Nistune you can fully map the DC for the boost solenoid (PowerFC you cannot).

So tell why the PowerFC is better? Because of its useless hand controller?

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881705
Share on other sites

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881708
Share on other sites

30 minutes ago, Kinkstaah said:

Also, the RB25DE Ecu can't be Nistuned, at least it couldn't back in the day when I had one.

May have changed now as I admittedly hadn't looked into it for several years, but I got the impression that the actual ECU was fairly different hardware wise to the GTT one.

If that's the case GTt ones are dime a dozen, everyone going Halaltech or Link or Motec or ECU Master or Syvecs these days.

Link to comment
https://www.sau.com.au/forums/topic/474557-r34-nat/#findComment-7881713
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...