Jump to content
SAU Community

Recommended Posts

26 minutes ago, IMACUL8 said:

Awesome Benny - love it!

 Thanks mate, good to see you're still keeping an eye on the build!!

Interestingly, the boost controller read 729ps, which must have been before the Prostock build.

The boost controller is now being chucked in the bin in lieu of a MAC VALVE

I can only assume the owner eventually sold it as he realised not having that much power wasn't for him.

I think down the road, we'll all be seeing a big EFR strapped to this lead sled.

14 minutes ago, BakemonoRicer said:

 Thanks mate, good to see you're still keeping an eye on the build!!

Interestingly, the boost controller read 729ps, which must have been before the Prostock build.

The boost controller is now being chucked in the bin in lieu of a MAC VALVE

I can only assume the owner eventually sold it as he realised not having that much power wasn't for him.

I think down the road, we'll all be seeing a big EFR strapped to this lead sled.

Of course - haven't been around much lately - got some work stuff I'm dealing with - but I'm subscribed to your thread as I love the car.....

I'll be posting soon - have a potential project in the garage (car that I imported when I got mine for a guy that has come back to me) ;)

Can't keep both ... so we'll see what happens....

 

Just now, IMACUL8 said:

Of course - haven't been around much lately - got some work stuff I'm dealing with - but I'm subscribed to your thread as I love the car.....

I'll be posting soon - have a potential project in the garage (car that I imported when I got mine for a guy that has come back to me) ;)

Can't keep both ... so we'll see what happens.... 

 

Hmmmm... I wonder if this could be the Bayside Blue Auto Select BNR34.......

HOW COOL DUDE!

Just now, BakemonoRicer said:

Still wish you had of sold me your S3 KR4 GT-R.

I would of saved money compared to the white polar bear LOL

Not for what you wanted to pay ;) ??

  • Haha 1
  • 2 weeks later...

TRP Rigoli have finished working their magic, the don mega fuel system full of their custom bits is done & so is their custom crank trigger setup.

This should pepper the car nicely ready for EFR life down the track....

1VMwDTh.jpg

rrMKUI2.jpg

NX57UXE.jpg

FlZPJDG.jpg

0Q0lXI2.jpg

gRVwpeH.jpg

d00FdqK.jpg

lI9YLsM.jpg

 

  • Like 2

Fuel system and crank trigger bits look good, I also thought that looked like an angle grinder job lol

What's up with all the filth and surface rust in your bay? Consider removing engine when you do the turbo swap and cleaning it all up. will lift the car a lot. 

Slideshow was severely lacking Benny, no dyno runs, no drive bys, no tacho hitting red line etc. Actually... no video content at all 0_0

Image result for son i am disappoint

I was talking about the pic that shows the holes coming through near the subframe but somehow thought that was an engine bay shot? WTF lol

What's the plan for the surface rust underneath gonna clean/paint it all up? Would look amazing done. 

Are they actual bulk head fittings or was there just a hole cut through the sheet metal?

 

Lol hmmm No plans to address surface rust there. If I was buying a car I’d rather see it....As soon as something gets painted over I would think the worst. 

I need to bring the car into the 21st century with more mechanical mods first anyway. Despite the fact the car hasn’t been tuned yet, I’m already saving my pennies for an EFR8374 or EFR8474 setup. 

I also thought Dan had lost his mind... 
The surface rust isn't bad, but i'd be keeping an eye on it, just in cases. 

 

8 minutes ago, BakemonoRicer said:

I’m already saving my pennies for

^^^^Every single GTR owner ever. ?

31 minutes ago, BakemonoRicer said:

Lol hmmm No plans to address surface rust there. If I was buying a car I’d rather see it....As soon as something gets painted over I would think the worst. 

I need to bring the car into the 21st century with more mechanical mods first anyway. Despite the fact the car hasn’t been tuned yet, I’m already saving my pennies for an EFR8374 or EFR8474 setup. 

The longer you leave surface rust the longer it gets the chance to become deep rust. 

Get it cleaned up, painted over, and seal the metal from the elements to prevent further rust. 

 

It also concerns me, you said this was all rebuilt in 2016, yet there is surface rust in a few pictures underneath it. 

My POS has less surface rust under it and it sat in a field, on a farm, for the past 2 years, and also went 1.8M under water in a flood during that time, not to mention just sitting around for years. I'm wondering what the rebuild hid or more so, it's life after the rebuild. Crazy salt roads? 

  • Like 1
  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...