Jump to content
SAU Community

Recommended Posts

7 minutes ago, niZmO_Man said:

Where is it located? Maybe show a zoomed out picture? Follow the wires?

It's located under the steering wheel. I have uploaded a zoom out picture. Yeah i will just follow the wire. Do you think it could be adaptive Front-lighting System?

IMG_0192.jpeg

16 hours ago, Jeets said:

adaptive Front-lighting System

My BMW has a switch for realigning headlights according to load. Later Nissans had it also, is this the early version? Have you tried it out in the dark, point the car at a wall and see what the headlights do when you activate it.

  • Thanks 1

Oh my god ! 

"Wouldn't press it if i was you."

That's going against human nature !

Its in humanity's make up to press that button.

If there the was a big red button marked:-

"END OF THE WORLD BUTTON DO NOT PRESS"

Before you could turn your back . . . . . . someone would just to see what happens.

So, this thread was funnier to me until I picked up the Fuga today, and it had that button too.

Anyway, after some quality time with the paperwork (yes, an import that actually came with original papers!), it is a button related to the option ultrasonic alarm.  I also have an extra "security" led on top of the steering column.

So, turn the switch on, headlights to auto, lock car and walk away. Approach with key on you after dark, and an LED lights up the driver's door handle so you can find it and unlock it using the door button. 2021-02-20 20.23.30.jpg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
×
×
  • Create New...