Jump to content
SAU Community

Recommended Posts

20 minutes ago, Kinkstaah said:

This guy is definitely going to have all sorts of pain owning a car like this.

You have to upgrade pretty much everything to get 260kw. The only difference between what you need for 260kw and 560kw is the engine build part. Still need every supporting mod, and buying a 260kw turbo is much the same price as a 560kw turbo.

Thanks. I just spoke with drivermotorsports here in the US.

 

said same thing. Oddly some people say you don’t have to have everything others say you do. Why it’s so confusing. My bmw m2 was easy, this is a new platform and there is nothing dead on.

he said what you said, injectors, exhaust, manifold, haltech (I’ll prob go elite), downpipe, intercooler, Turbo, and a couple of other supporting mods.

 

I was interested in what everyone was using (brand - make) etc.. to see if I can come in under 6 grand.

again, thanks for the help. Very much appreciated. 

All of the brands and prices are likely going to be different here. These cars aren't new, and everyone here has been here for well over a decade and know the game.

Everything is custom made. Intakes for your turbo, manifolds, exhaust are all custom to every application. Lines, hoses etc - Custom to every application. Dyno tuning is custom to every car.

The G25/G30 Garretts are likely the simplest fit if you aren't doing all the labor yourself. Mainly due to the fact they're physically smaller. I would go a full race manifold simply because they're good, and USA based. All the stuff in AU will be going 6boost et al which are australian based.

Intercooler, eh - If you have a guy who is going to make you a full custom exhaust, it's not a stretch for the same guy to make up intercooler pipes to suit whatever core you have available locally that can fit. Same story for intake/pod/airbox if you want one of those.

If you can get a plug in ECU it will save a lot of time and heartache. 

----
You could go smart and forget about a custom manifold, and a custom turbo and get in touch with Hypergear for a truly bolt on applicaiton that will make the power. 350whp is possible with:

Stock exhaust manifold
Stock turbo that has hiflowed internals (which means it bolts up perfectly to stock lines, stock intake etc).

This will be much simpler, but you'll still need an exhaust of some description, though you COULD get away with an off the shelf dump pipe, making your exhaust guy's life much easier.

Still need an intercooler of some description, but you could get by with a return flow kit (blitz etc) that will work fine for that target. The only other fabricatory thing you'd need is some kind of metal intake to the turbo, as the silicon can suck shut under that much vacuum.

Still need ECU, Injectors, Coilpacks (likely), and fuel pump that isn't too hard to fit/mount, and make sure you get 14V to that pump instead of the OEM 12.


Will this perform as well as a full race/garrett small G series turbo to make the same peak power? No.
Do you care? Depends on your budget and very much on how much access to custom fabrication you have.

  • Thanks 1

 

Heres some number for ya

 

 

injectors, 500

exhaust, 500

manifold,not needed

haltech (I’ll prob go elite) 1000

, downpipe 250

, intercooler 500

, Turbo, 1500

Clutch 1500

Diff 1000

Fuel pump 250

Tuning 750

Labor $$$x

 

  • Thanks 1
2 minutes ago, Ben C34 said:

 

Heres some number for ya

 

 

injectors, 500

exhaust, 500

manifold,not needed

haltech (I’ll prob go elite) 1000

, downpipe 250

, intercooler 500

, Turbo, 1500

Clutch 1500

Diff 1000

Fuel pump 250

Tuning 750

Labor $$$x

 

Thank you both for that. 

exactly what o was looking for. I watched a sh.. ton of videos today about hyper gear and how much people like them. Mose likely will have to try and buy one without core and spend extra money.

They are trying to source mochimoto? Intercooler and will do the piping. Coil packs I was looking at the splitfire or r8. I did see the cost of r8 and it looked like 750.00 need to look at split fire to see what they cost.

 

 Again, appreciative of the info 

6 minutes ago, Kinkstaah said:

All of the brands and prices are likely going to be different here. These cars aren't new, and everyone here has been here for well over a decade and know the game.

Everything is custom made. Intakes for your turbo, manifolds, exhaust are all custom to every application. Lines, hoses etc - Custom to every application. Dyno tuning is custom to every car.

The G25/G30 Garretts are likely the simplest fit if you aren't doing all the labor yourself. Mainly due to the fact they're physically smaller. I would go a full race manifold simply because they're good, and USA based. All the stuff in AU will be going 6boost et al which are australian based.

Intercooler, eh - If you have a guy who is going to make you a full custom exhaust, it's not a stretch for the same guy to make up intercooler pipes to suit whatever core you have available locally that can fit. Same story for intake/pod/airbox if you want one of those.

If you can get a plug in ECU it will save a lot of time and heartache. 

----
You could go smart and forget about a custom manifold, and a custom turbo and get in touch with Hypergear for a truly bolt on applicaiton that will make the power. 350whp is possible with:

Stock exhaust manifold
Stock turbo that has hiflowed internals (which means it bolts up perfectly to stock lines, stock intake etc).

This will be much simpler, but you'll still need an exhaust of some description, though you COULD get away with an off the shelf dump pipe, making your exhaust guy's life much easier.

Still need an intercooler of some description, but you could get by with a return flow kit (blitz etc) that will work fine for that target. The only other fabricatory thing you'd need is some kind of metal intake to the turbo, as the silicon can suck shut under that much vacuum.

Still need ECU, Injectors, Coilpacks (likely), and fuel pump that isn't too hard to fit/mount, and make sure you get 14V to that pump instead of the OEM 12.


Will this perform as well as a full race/garrett small G series turbo to make the same peak power? No.
Do you care? Depends on your budget and very much on how much access to custom fabrication you have.

Very valuable info. 🙏🏽 

This is too easy in the US...... Add a boost tee and CAI and run it up on a Dyno jet Dyno 😂

Gtx3071 internal gate, plazmaman Intercooler kit, 1000cc top feed injector kit, aero motive stealth fuel pump, link g4 plugin ecu, 3inch exhaust. Factory airbox with a 3inch pipe to turbo. Plan for a gasket kit and clutch. Leaves plenty of room for more power later. 

There is almost 20years of information on this site, easy to find information with a Google search. 

To make about 270rwkws on pump 98 fuel from a stock manual R33 GTST, this were the parts and costs from one of my older projects:

800cc Xpurt injectors: $600
Walbro 540L Fuel pump: $200
Adaptronic ECU with Air temp sensor: $1500
HyperGears High flowed stock turbo: $950
Turbosmart Boost controller: $100
600x300x100mm Aeroflow cooler: $230
JJR's FMIC cooler piping kit: $250
3inches turbo back exhaust: $550
3inches intake pipe with Pod: $200
Split fire coil packs: $650
Xtreme clutch kit: $1650
Dyno tune: $800

All up: $7680 Assume all mechanical work carried out by your self
 

Edited by hypergear
  • Like 2

And thats just for the motor.............brakes, suspension, rims, tyres/tires, HICAS lockout, and other supporting mods are also needed to turn the Tokyo Taxi into a Hiroshima Screamer.  So add another $5-10K

All too hard???? Just buy a fibreglass body kit and  get a harlequin paint job and cruise around looking the part :)

If you want a reliable 350rear wheel horespower, you need the following:

 

Nitto 3.2 kit
Shimless head with full cnc porting with 288 cams
albins sequential

With your stock turbo, you should easily be able to achieve the power you desire.

 

 

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...