Jump to content
SAU Community

Recommended Posts

5 hours ago, joshuaho96 said:

I have zero issues with pad noise running MX72 Plus but YMMV. I'm using the stock Brembos so not 100% identical to your Sumitomo setup.

Are the brembos better than the sumitomos?

1 hour ago, kevboost7 said:

Are the brembos better than the sumitomos?

Well, yeah. They're bigger, for one thing, so they soak up more heat from stops before calling it quits. They are also stiffer calipers. The Sumitomos aren't terrible, but they are definitely not as stiff as the Brembo calipers.

  • 2 weeks later...

Update guys: Brakes aren't squeeking as bad during normal driving. They only squeek a little bit now after i mash on the brake really hard and then they will start squeeking slightly when coming to a complete stop. Still a mystery on why that is, but thanks everyone for the help. 

8 hours ago, kevboost7 said:

Update guys: Brakes aren't squeeking as bad during normal driving. They only squeek a little bit now after i mash on the brake really hard and then they will start squeeking slightly when coming to a complete stop. Still a mystery on why that is, but thanks everyone for the help. 

Sounds like you didn't install the missing brake shims/hardware.

  • 3 weeks later...
On 4/17/2023 at 5:41 PM, Murray_Calavera said:

Sounds like you didn't install the missing brake shims/hardware.

I dont understand how shims will cause that... the squeek is coming back now, but it comes back in really random times. Sometimes when i go on the brakes hard and it gets hot, then it will start to squeel. Sometimes i'll drive normally and it will not make a noise. And sometimes ill drive normally and it will STILL Squeel. This is driving me nuts. 

9 minutes ago, kevboost7 said:

I dont understand how shims will cause that... the squeek is coming back now, but it comes back in really random times. Sometimes when i go on the brakes hard and it gets hot, then it will start to squeel. Sometimes i'll drive normally and it will not make a noise. And sometimes ill drive normally and it will STILL Squeel. This is driving me nuts. 

Yeah ok, so have a think about it. What is sound? A vibration that propagates as an acoustic wave? 

When the pad and disc make contact, there is vibration. That vibration causes your lovely high pitched noise. 

The shims prevent the transmission of vibration.

No vibration, no noise. 

Now lets keep thinking about the situation. 

You are an OEM. You are trying to make a profit. Why would you manufacture all of these unnecessary brake shim hardware if it does nothing? Is that money well spent?

Look at all of the stock cars around you. They are dead quiet. They have brake shims/hardware. 

Your skyline came from the factory with quiet brakes. It also came with brake shims/hardware installed.

If you cannot install the brake shims/hardware, clean off all of the built up brake dust. If you still can't install it, get your hands on a workshop manual, instructions, watch youtube videos or just take the car to a mechanic who can do it for you. It's a 5 second job so should be very cheap to do. 

  • Like 1
1 hour ago, kevboost7 said:

I dont understand how shims will cause that... the squeek is coming back now, but it comes back in really random times. Sometimes when i go on the brakes hard and it gets hot, then it will start to squeel. Sometimes i'll drive normally and it will not make a noise. And sometimes ill drive normally and it will STILL Squeel. This is driving me nuts. 

Shims are changing the Q factor of the resonant peaks in the brake system. Sometimes you might not have the right conditions to trigger those resonant peaks. If you can't fit the shims in the brake pads you need to push the pistons back into the caliper.

  • Like 1
7 hours ago, kevboost7 said:

I dont understand how shims will cause that... the squeek is coming back now, but it comes back in really random times. Sometimes when i go on the brakes hard and it gets hot, then it will start to squeel. Sometimes i'll drive normally and it will not make a noise. And sometimes ill drive normally and it will STILL Squeel. This is driving me nuts. 

Just remove any shim or pin you like if you don't think it makes a difference. Ignore what Nissan designed. 🙄

  • 1 year later...
3 hours ago, soviet_merlin said:

Is the girlfriend still your girlfriend and does she ride in the car now? :)

It always makes me laugh when I hear things like this, when I was a young bloke I bought a old Mk1 Escort, one of my mates said "how do you expect to have a girlfriend in a old car like this", my reply was "if she doesn't like the car she can walk, and if she is more interested in the car I drive than me she can fark off"

This is how you can tell if you have a good woman, they care not about things like the cars you drive or what it sounds like

Pandering to crazy obsessed women who care more about how they look in a car than the person driving it is something that I've always kept away from

Not saying my Mrs isn't crazy at times, but it's typically me being a idiot that incites the crazy 🤪

  • Like 1
17 hours ago, soviet_merlin said:

Is the girlfriend still your girlfriend and does she ride in the car now? :)

Funny you ask, because its been about a year since i made this post. She is no longer my gf now lol. I have a new one though that didn't mind the squeeling. 

  • Like 2
  • Haha 3
On 30/03/2023 at 5:46 PM, admS15 said:

You've had some decent suggestions above now, I'm just going to suggest the obvious.

Change girlfriend, problem solved. Other random unpredictable problems may present themselves. Your experience may vary...

QFT

Seems I provided sage advice. Glad your problem/s are sorted.

  • Haha 5

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...