Jump to content
SAU Community

Recommended Posts

1 hour ago, soviet_merlin said:

Is there any downside to running bigger brakes when done right? Or is it that people cut corners when it's just for looks and it compromises on a major safety component?

Genuine question as I'm not sure where the hate comes from. Big brakes certainly look amazing.

I think it's more a practicality issue. Done wrong it can definitely be problematic, I see a lot of BBKs that are clearly track-only because they want you to remove/cut away most of the dust shield, have no dust boots on the pistons/generally a full race kind of caliper, require you to grind away significantly at what is arguably a fairly weak suspension knuckle as-is, etc. Pad knockback and wheel bearing issues on track are not unusual to hear about with these cars. Kind of questionable to spend all that money and have it be worse on the street than when you started if it's not a dedicated track toy. 

  • Thanks 1

imho, aftermarket brakes to me dictate that the car has alot of power(Not all the time). I used to get heaps of guys who look twice at my brake setup at the lights, and then ask what sort of power im running.

OP - Check out Brakes Direct. I run their full kit on my car and the brakes are fkn amazing.. plus, I get no squeal at all.

37 minutes ago, joshuaho96 said:

I think it's more a practicality issue. Done wrong it can definitely be problematic, I see a lot of BBKs that are clearly track-only because they want you to remove/cut away most of the dust shield, have no dust boots on the pistons/generally a full race kind of caliper, require you to grind away significantly at what is arguably a fairly weak suspension knuckle as-is, etc. Pad knockback and wheel bearing issues on track are not unusual to hear about with these cars. Kind of questionable to spend all that money and have it be worse on the street than when you started if it's not a dedicated track toy. 

Hi. Thanks for the informative post. I don't want to end up with any of the issues you mentioned and would like to avoid cutting etc. That is why I wanted to get peoples opinions who have made upgrades.

  • Like 1

Well, you cannot avoid cutting or removing the dust shields if you're going to go as large as you're talking about.

And you should not even ever just once consider grinding anything off of the upright or any other part of the front suspension/steering, even for a track car. Doing it on a road car should be punishable by death (and it could happen).

1 hour ago, Predator1 said:

imho, aftermarket brakes to me dictate that the car has alot of power(Not all the time). I used to get heaps of guys who look twice at my brake setup at the lights, and then ask what sort of power im running.

OP - Check out Brakes Direct. I run their full kit on my car and the brakes are fkn amazing.. plus, I get no squeal at all.

AVOID BRAKES DIRECT

Have stuffed around so many mates in the past 18months and hearing more stories of bad customer service. 

  • Like 1
1 hour ago, robbo_rb180 said:

AVOID BRAKES DIRECT

Have stuffed around so many mates in the past 18months and hearing more stories of bad customer service. 

I WAS one of the horror stories. I had fitment issues for the front adapters. Rear was ok, just needed the dust shield to be trimmed as needed. I exchanged lengthy emails and even spoke to George and Greg over the phone. They paid for some of the work required to make my adapters fit. I also stuck bigger brake lines in the back as I'm a picky SOB, but once the brakes were fitted it worked like a charm. Didnt get time to push the brakes.. Only did a semi track day in the rain but had no issues pulling up from around 200.

Wow ! It seems everything new is old ! I remember seeing on a early Holden Commadore that was running in the ( I think ) Repco / Redex rally with a set of front dual callipers !

Then I threw a couple of rocks at the Tyrannosaurus rex that was looking funny at me and hid in the back of my cave until it wandered off !

Edited by PLYNX
  • Haha 2

Just get GT-R Brembos all round, convert the rears to drum hand brake too.

A true car enthusiast will appreciate the OEM+ approach, spend the left over money on a Nismo GT-Pro LSD. Enjoy life, then sell the car, profit and buy a M2 Comp.

  • Like 2
25 minutes ago, Murray_Calavera said:

Genuine or reproduction? 

Looks like used genuine is still going for 2k+ 

I got my genuine Brembo stamped 350z track edition calipers for 265$ a pop off Amazon. Both calipers, StopTech disks and a set of Hawk HPS pads came in around 1000$. I have heard though that when ordering from Cardone it's a mix of remanufactured Brembo's and new clones. 

Cardone 19-3858 Remanufactured Import Friction Ready (Unloaded) Brake Caliper, Tools & Equipment - Amazon Canada

13 minutes ago, GTSBoy said:

I highlight two words that have a tenuous and troubled relationship with each other.

They're from Cardone, a very large reputable parts manufacturer/remanufacturer in the US/Canada. I have zero concerns.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...