Jump to content
SAU Community

RB gearbox options

rbs30

By rbs30,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

rbs30 Collaborator

rbs30

Posted
  • Author
Posted (edited)

FS5R30A the nav box isn’t it? I did think about those. Any issues? I wondered if the bell housing off an rb30 patrol would work as they are the same gearbox but with a transfer I believe. 

Edited by rbs30
joshuaho96 Veteran

joshuaho96

Posted
Posted
16 minutes ago, rbs30 said:

FS5R30A the nav box isn’t it? I did think about those. Any issues? I wondered if the bell housing off an rb30 patrol would work as they are the same gearbox but with a transfer I believe. 

It's used in the GT-R, GTST/GTT, and Z32 VG30 NA + TT versions. Nissan still makes them new, they're not cheap but they're not expensive either. Personally I would just get something direct-fit and be done with it but I'm not that handy at fabrication.

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted

The r34 gearbox is like $3400/3700 landed from Japan sometime last year.

 

Contact jessestreeter.com for info and quotes.

From memory the navara gearbox needs input shaft machined down as I looked into a while back and there's a thread somewhere here from 2018-2021 about it.

Depends on what your doing with the car maybe worth the dollars to go cd009 or a 8hp50/70.

rbs30 Collaborator

rbs30

Posted
  • Author
Posted (edited)
24 minutes ago, robbo_rb180 said:

The r34 gearbox is like $3400/3700 landed from Japan sometime last year.

 

Contact jessestreeter.com for info and quotes.

From memory the navara gearbox needs input shaft machined down as I looked into a while back and there's a thread somewhere here from 2018-2021 about it.

Depends on what your doing with the car maybe worth the dollars to go cd009 or a 8hp50/70.

Is the CD009 similar length from bell to shifter? 
 

car will just be for the street with the odd track day. It’s RB30det, and weighs about 1000kg

Edited by rbs30
  • Like 1
TurboTapin Proficient

TurboTapin

Posted
Posted
15 minutes ago, rbs30 said:

Is the CD009 similar length from bell to shifter? 
 

car will just be for the street with the odd track day. It’s RB30det, and weighs about 1000kg

Yes, it's similar length. 

joshuaho96 Veteran

joshuaho96

Posted
Posted
13 hours ago, robbo_rb180 said:

The r34 gearbox is like $3400/3700 landed from Japan sometime last year.

 

Contact jessestreeter.com for info and quotes.

From memory the navara gearbox needs input shaft machined down as I looked into a while back and there's a thread somewhere here from 2018-2021 about it.

Depends on what your doing with the car maybe worth the dollars to go cd009 or a 8hp50/70.

I forget this is an au website, my GTR FS5R30A was 2200 AUD delivered but I did have to go to a warehouse near the port to pick it up myself.

GTSBoy Grand Master

GTSBoy

Posted
Posted
5 hours ago, joshuaho96 said:

I forget this is an au website

It's in the bloody domain name twice!

Yes...the GTR boxen have, for some reason, been cheaper than the RWD boxen for a long time. 10 years ago the GTST box was available here for <AU$3k. 5 years ago the GTT box was available for ~AU$3300. Both retail through 3rd party. Now the GTT box is >4k locally and only available for less if you're willing to jump through some hoops. Apparently they can be ordered from Nissan dealers for $3-3.5k at trade pricing.

A friend of mine has a new GTT box sitting on his showroom floor that I keep wanting to hit him up for but I'd somewhat rather he sold it to someone else at his asking price than to me for a mate's rates discount.

rbs30 Collaborator

rbs30

Posted
  • Author
Posted
12 hours ago, Komdotkom said:

I've got a R33 turbo box I don't need if you're interested. I only ran it for a couple of track days and on the dyno before going sequential. In Melbourne, $1500 if you don't stuff me around.

That’s a great deal and I would jump on it if you were closer. Melbourne is a bit of a hike for me though unfortunately 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...