Jump to content
SAU Community

Recommended Posts

  • Replies 321
  • Created
  • Last Reply

Top Posters In This Topic

So Vuster, hows the car settling in, and will we see you at the next track day (at least for a hello and watch the racing)?

Hi mate. Yeah car is all well and good. Finally got the car tinted and had to replace all 4 tyres. 2 back ones were completely worn out due to the media abuse. The car is build no. 003 and was a journo car so it's been around the bush.

$2000 for a set of 19 inch tyres was a bit much though.

Also tint professor sux. Cheap at 250 but I had 2 spears, one on each of the front windows. One spear didn't go away so I had to get it redone. Another spear popped up and I had to keep pushing it down till it completely dryed out.

Good service but bad quality for anyone who's interested.

I'll like to come to track. Post me next time you go and I'll tag along just to spectate.

Hell yeah the racepace GTR is what god drives when not towing the caravan ;)

Sorry to hear about the tyres. I was looking at some Pirelli 285/18" Porsche Cups today for the GTR, but glad I'm not paying new. I have second hand dealers I go to so about $100 each for slightly used 17"s from Europe.

Thanks for the tip on Tint professor. I need to get some done.

No need to be sorry about my tyres. It was charged on my fleet card. Admin had a chat with me a few days later because I only had the car for 2 months. Had to explain that they were bald when I purchased it. I had the pirelli's but went with the Good year 245/35 F1's cos I hear they are good in the wet.

Dunlop 9000SP is the best I've found yet on the track, but a bit squealy so you hear the limit even in a helmet. They replaced the F1 Eagles I had which until the Dunlops where the best I'd found so good choice.

Pity we won't see you at Sandown. You will miss an awesome sight. Good luck with the fishing.

  • 2 weeks later...
Timbo, sorry to burst your bubble mate but with the mods you mentioned you will not achieve much better than the 6.0/6.1 sec factory specs of the standard manual 'line.

When the factory goes out to determine the 0-100 time they spend many hours with a professional test driver about the size of a 13 year old, with minimum fuel in the tank and possibly all ancillaries removed from the boot, and they practice until perfect. Then they run a small number of sprints to 100 and take an average. All factories do this.

Auto magazines constantly compare the factory time against the best they can do in real world conditions, often with a passenger, and never come close.

Now maybe you can improve a little with the new exhaust and a cat replacement pipe, but at the same time the extra power will make it harder not to slip into wheelspin. Then you will have to spend on engine management, a decent turbo, good rubber, suspension (not the rock hard Jap stuff) as the standard stuff is nasty for axle tramp, pineapples to allow some rear squat and a good yet forgiving organic clutch that will allow some slip without burning up.

Given that a GTR does 4.7-4.9 factory figures you are looking at making some serious mumbo and just monstering it to get over the 5.0 second line. I have spent a fair bit of my life racing, and I think I'm fairly reasonable and consistent but I doubt my GTS25t track car would go under 5.0 even once the twin turbo setup is sorted with a target of 280rwkw.

Guys I think even mildly modded we're a long way from mowing the 6.0 as easy as everyone thinks.

Well mate i dunno what to say ... the stopwatch doesn't lie if you ask me. i Have 265 tyres on the rear and coilover suspension. But my speedo went from 0 - 100 in 5.2 secs. I have also raced hsv - not the 6 litre but the vy series 2 clubsports (285kw) and i beat them up until 100 after that the big 8 rumbles on past.

Then I'd suggest take it to the strip or use a proper data logger as the stopwatch can be started late.

Perhaps you have some drag timeslips as I can then interpolate 1-100 times from that, include the Dynosheet that demonstrates you have around 260rwkw as well. I suspect from your comment above the engine is pretty basic now.

Maybe at the next race engineering seminar later this month I'll let Claude Rouelle (see the Motec website for info) know that someone has found a better way to launch a skyline (or any car) that proves us all in the engineering world wrong. Can I give him your number?

yeh god on u for posting it in here....ive got a vl calais turbo(which is 4 sale)and i also think holdens are great cars,but i now also like my r32 gtr much more than the vl turbo,its got high mount t04b custom extracters,3inch zorst,big ass cooler,forgies etc and my gtr would blow it to peices.and yeh put some pics of ur beast up aye

A mates mate the other day had a SS with some work done to it and was paying out jap cars etc.. i turned around and said whenever you want to line up let me know, he knew i'd kill him, so turned around and said 'sure lets see how youd go towing 2 tonne trailor and 5 people' my comment was 'are we racing or are we taking the kids and caravan on a holiday'

On that note.....if I had more dollars than sense, something I've always wanted to do is get a Viper and strap twin turbos to it, and just build it up to make stupid levels of power and torque.

I'd just love to hit a highway in the Viper while towing a 12ft yacht or something, and then stomp it next to a light tune turbo import, Aussie V8, or Euro muscle. Assuming I didn't rip the towbar off the car or get flung off the road, I can just imagine the other driver's face watching as the back of my car runs past their A-pillar...........followed closely by a boat :)

Going on the speedo and stop watch i can do 0-100km/h in about 3 seconds. All it takes is a big 2nd gear burnout and the speedo swings straight past 100km.h:)

Seriously speedos are inaccurate, mine is anyway by 7km/h at 110km/h...then on top of that you have to worry about timing errors.:)

Seriously speedos are inaccurate, mine is anyway by 7km/h at 110km/h...then on top of that you have to worry about timing errors.:)

Stop worrying and just learn to rely on dumb luck. :)

With any luck your speedo error and timing error will cancel each other out, and you'll get an accurate measurement! :jump:

First up, i respect you for putting this post up even though your going to get alot of youngins dissin you for your ride.

not me, i own a 33 gts-t and still love holdens, my family owns 2 of em, vt exec wagon ( gets the chicks :Pimp2: lol ) and a vy ss ute, love that ute, it goes :uh-huh:

I would expect a few to say the following so I'll type it before they do:

1)Holdens are crap etc etc

2)Holdens are slow etc etc.

3)Why buy a holden etc etc.

4)GTR's rock and will leave anything for dead.

5)Why spend 60K+ on a car when you can buy something 1/3 of the price, mod it and have a rocket.

6)I am not a stereo typical v8 driving bogun. I do eat rice and last ride was a S15.

7)holdens look crap

8)holdens are too heavy

This talk is best left to other forums, See thread on XR6Turbo forum,

I also don't condone or advocate drag races on the street.

However, very nice Clubbie (?) It's good to see the australian muscle cars getting some balls back after they were ripped out of them by the beaurocrats in the late 70's. Love all the oldschool 8's, and the new Clubbie and (FPV) GT are great cars

Going on the speedo and stop watch i can do 0-100km/h in about 3 seconds. All it takes is a big 2nd gear burnout and the speedo swings straight past 100km.h:)

Seriously speedos are inaccurate, mine is anyway by 7km/h at 110km/h...then on top of that you have to worry about timing errors.:P

My speedo seems to be pretty accurate tested it at diffirent speed with a GPS was accurate at every speed even high speeds which surprised me.

You should be about to get with .1 or .2 of a second with a stop watch do 3 or 4 runs and take an average. Give a reasonbly good indication I get arround 5.2

:)

I currently own a 6 litre HSV

I searched and couldn't find answer/and or comments on these;

How much did you pay for it? How many GTST's can I buy for that?

How fast is it in the rain? Our GTR's are just as fast.

How fast is on a bumpy/dirty road surface? Our GTR's are just as fast.

That's the advantage of a GTST on a performance per dollars basis they are unbeatable. The additional advantage of a GTR is traction.:)

I searched and couldn't find answer/and or comments on these;

"How much did you pay for it? How many GTST's can I buy for that?"

About 53K on road. That's 1 late model R34GTT and 15K change for mods? Or 4 R32 GTSTS? Or 3 GTSTS? Or 1 good nick 96 R33 GTR? Or half a R34 GTR?

But then again it's more relevant to compare new price with new price.

"How fast is it in the rain? Our GTR's are just as fast."

Yeah.. your GTRs are probably fast as or faster in the dry so the answer is obvious.

"How fast is on a bumpy/dirty road surface? Our GTR's are just as fast."

Yeah that answer is obvious too. All to do with 4w4 and chasis design. Sports chasis vs family chasis?

"That's the advantage of a GTST on a performance per dollars basis they are unbeatable. The additional advantage of a GTR is traction.:cheers"

No arguments there.

You have overlooked the practicality advantage of the HSV. It's a family sports car not raw sports car like GTR. I can ask you some questions back:

1)Can you tow a boat or trailor?

2)Do you get any lag?

3)Can you have a full car load and not feel a substantial change in accelleration rate?

4)Do you have warranty?

5)Are there lots of service centers that specialize in your car?

6)And last but not least, do you have much space in the back to make out with your partner? hahaha

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...