Jump to content
SAU Community

Recommended Posts

Rather than obviously starting a new thread here is my plan.

I plan to be running about 17 - 20 psi with a flow rate of about 500hp(imagine a 3076r). Would the turbo blow out the spark from the standard coil packs?

I plan to buy all the gear I need when I fit the turbo in so I don't want to install it then have something break then have to buy something else.

Someone tell me what I should get. I'm looking at yellow jacket coils, Ive heard good things and they are cheap compared to others out there. Now the plug. People say run a smaller gap when at higher boost but if you run bigger coils run the bigger gap. I'm planning ahead for all this and need my gear ready. Should I go out and buy my self a set of 1.1mm? Anyone suggest which spark plugs I should get? I'm not too keen on changing plugs every 5000km.

I'm estimating about 280 - 300rwkw.

You'll probably need to go aftermarket, they're only about $400 and running that boost will be pushing 15 yo coil packs. Yellow jackets are seemingly as good as splitfires (they've been round a while now and still going strong), with 2 years warrenty and for 2/3's the price.

Changing spark plugs every 5-10k km is something that you'll probably have to live with, esp running on much boost. Plenty of people like that at least changing that regularly they are monitoring cylinder conditions that regularly too, gives you a heads up if one plug is fowling too often.

You'll probably have to go 0.8mm gap for that boost, it seems to be what most people do. I'm not sure if that'd be a 7 or 8 heat range, but for 7 i'd go with bcpr7es/bkr7es or fr8dp (bosch plats for cheap)

If you want any more info for this power range look at the dyno thread.

Alright well I'm getting a set of yellow jackets. After re reading the thread alot of people here are using a 1.1 gap when running better coils. Should I do the same or should I jump to 0.8?

I don't really feel like buying plugs, fitting them to see they work like dick then buying another set again.

Ill be sticking with a 7 heat range as 6 I recall being stock and the cooler ones respond better with more power. Gonna buy my self a bulk lot of copper plugs and change them every second time I do an oil change or when I notice pops and misfires.

Also what do people do when monitoring their cylinder conditions? Do you mean conducting a pressure test every time you change the spark plugs? Pretty sure you'll be ending the life of the cat converter pretty quickly.

To sum up all my shit,

What plugs should I get? 300rwkw 18psi rb25det with yellow jackets?

Its always best to run the biggest spark gap possible. Try 1.1mm bkr7es11. The reason we run a colder plug with higher powered engines is for safety. More power means more heat and if the combustion temps start to make the spark plus glow ( which happens) than the glowing plug can ignite the fuel/air mixture before the spark plug is ready to fire. This is called pre ignition. Which will kill ur motor within seconds.

Imagine the piston trying to travel up the bore and the flame burning above it trying to push it back down. = not good

Also what do people do when monitoring their cylinder conditions?

To monitor cylinder conditions u need to read the spark plugs condition.

Yep, the condition of the spark plugs can tell you a lot about how the engine is running. ie if they're a little covered in soot that's normal, if they look like they've been damaged by heat, or they're covered in a thick layer of unburned fuel (soot) then you're getting a warning before things go wrong.

Splitfires are more widely used because they've been around longer than yellow jackets. It's probably true that there have been more problems with yellow jackets, but the people with yellow jacket problems just get sent a new coil/coils under warranty. If you want confirmation of who's using what making your power, just look at the dyno thread.

  • 1 month later...

For what it's worth to whoever; I had a misfire issue which would start from ~4000rpm and cause issues anywhere from here on up, which is where the car starts to make decent boost.

Car has splitfires & new coil pack wiring harness - runs Vipec management and makes 500rwhp.

It was running BCPR6ES-11 (ie 1.1mm)... put a new set of the same plugs in. No help.

Pulled the 'new' plugs and gapped to 0.8... changed misfire from big bangs and cracks under load to short fast pops.

Had pondered and checked up on a lot of things, swapped igniters with a mate, was going to swap CAS, splitfires, loom, etc

Today threw in a set of BCPR7ES plugs, gapped to 0.8... misfire instantly gone. Pulls hard from 4500-8500rpm in all gears, well... maybe not 8500 in 5th hahah but you get the idea.

Happy as f**k now... back to dishing out bulk chop :)

Hopefully that can help someone too.

  • 2 weeks later...
  • 1 month later...

ok, firstly, i know this is in the forced induction thread but im getting no replies in the N/a one D:

Im looking at a, well over due, new set of plugs my 32 N/a

anyone bought off ebay ?? alot cheaper and was lookin at getting a set of these

http://www.ebay.com....23048a3aa1#shId

any feedback on them ?

cheers

  • 2 weeks later...

Been running BCPR6ES .8mm gap in a RB25 neo pushing 247rwkw for around 6 months.

been getting an occasional missfire in high revs (1st & 2nd gear) so not sure if its plug related, but i'll be switching to BCRP7ES .8mm as recommended by a few ppl in here so hopefully fixes the problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...