Jump to content
SAU Community

Recommended Posts

Hi um i dunno if this helps but i had 3 1/2" catback then i gat the epa notice, so i had a good look at what i had under the car and found a Flange plate just under the the rear axel that had the cannon attatched, so i went to an exhaust place and got them to make the back bit out of 2 1/2" with a nice big quite muffler. It cost me 140 but at least they done what i wanted other places wanted me to replace the lot for 350!. Anyway the test showed a nice quiet 80 db.

I noticed that i had no power, no noise and no fun. so as soon as i passed the test i chucked the cannon back on all better now, and when i get another notice probably next week i already have the solution!

:D

i got tested at 100dB with my Trust Power Extreme Cat back, Blitz Front pipe, and Trust Dump... went down to the local exhaust shop and got a weasly bit of 2" from the rear flange with a fairly pissy round standard muffler and they re-tested it at 85dB! only cost about $120 and very suprisingly the car doesnt seem to of lost any noticable power!! however its quiter than a standard ford laser! :D

Also, aparently Silencer plugs WILL NOT PASS according to the EPA noise tester i went to! Mine only brought the noise down to 94dB anyway but the guy said even if they're welded in they're not allowed to pass them any more! :ninja:

Does the EPA actually get the car on a hoist or take it for a drive during a full emissions test??? (obviously this is different to getting a RWC)

yeah i the fmic isnt stock, i undersatnd you cant have both. i just thought it was wierd how quick he let me go, and i also thought that you got caneried when you got a epa???

they dont need to stick around long.... once they've got ur rego they already know where to send the letter!

probly just checking if the driver was also the owner! :D

  • 2 weeks later...

This should be an easy one, but a quick question, if I buy a car with an epa on it and no rego in victoria, can I get a day permit to get it up to Canberra? or will I need to trailer it up? Car has an epa on it for excessive noise.

If the date on the notice has passed the cars rego will be suspended. That mean that in VIC you can;t get a day/unreg vehicle permit.

As all the state systems are hooked up now I would be almost certain you would not be able to get a permit to drive the car in the ACT. So you will have to trailer it up.

  • 3 weeks later...

Thanks for the info stolen_s15

It might be easier if I just post up the car's mods and if anyone can tell me which is defectable, apart from boost controller. Couldn't find any info on whether other items eg., turbo timer defectable.

HKS split dumps

HKS front pipe

HKS hipower catback (legal noise I think)

HKS adj cam gears (IN/EX)

HKS timing belt with Trust clear cover

Apexi pod air filter

Turbo timer

Nismo twin plate clutch (super coppermix)

Cheers. Much appreciated.

Clutch - No issues

Air pod - only okay if you dont have a front mount added on (GTR excepted)

Timing belt - No issues (cant see any problem with clear cover)

Catback - Legal if it meets both noise and emissions levels.

Others, no idea, but I think they are all okay.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...