Jump to content
SAU Community

Recommended Posts

Specs looked on the missus one too, but sucked. The proof is in the pudding though, I would expect Target to stock something better than Aldi does. Can always take it back if it sucks. The issue I see is the size when something like the Kodak I bought (or any other of similarly sized and similarly cheapo cams) are easier to mount and work with.

Plus with the GoPro's and the like, you know you can rely on the mounts and the casings (mostly) when you buy like me, it's a gamble :D

  • 1 month later...
  • 1 month later...

I recently got the Sony Action cam for testing too. It does 120fps in 720p which is interesting. Also external mic 3.5mm jack too.

I picked up one of these in Vegas earlier this month - we gave it a good test on our ski holiday. For $200 I'm very impressed with the video and sound quality, although in the waterproof case the sound is muffled somewhat. We had the camera mounted on my son's helmet, and the image is stable considering the amount of movement. The only problem was that it fogged up on the inside of the case a couple of times (-14 deg will do that) but it was only when it had picked up moisture from being inside. I sat the case near the heater overnight, and there was no moisture, so no fogging the next day.

The lens on the case is exposed, and can easily get scratched, so that's something to be very careful about. I keep mine stored in the plastic sleeve it shipped with, and ensure I handle it carefully.

I found the 170 degree FOV good for skiing / snowboarding, although the 120 deg will probably be better for motorsport applications.

Just looking at what kinds of mounts I can make for it to use it in motorsport use. The adhesive mounts stick very well, but of course you can't swap from helmet to helmet.

All in all I'm pretty impressed with the quality of this thing (typical Sony), but TBH I haven't compared too many other motorsport cameras.

  • 3 months later...

Tossing up between the Drift Ghost HD and the Hero3 Silver.

Ghost has better lense/quality, better battery life, access to ports (no skeleton cases), built-in screen, remote included. But will set me back around $450 + SD + extra battery + rollbar mount.

Hero3 Silver does many basics that Ghost does but $100 cheaper and probably more of a market for accessories/2nd-hand gear. $320 + SD + extra battery + rollbar mount + ext. mic

:wacko: cant choose.

  • 7 months later...
  • 4 months later...

So considering a new camera for an upcoming holiday. I have an old Radcam and an old circa 2011 GoPro. Is there anything new to the market that is a better proposition?

It will be an open top car so external mic is a must so that wind noise doesnt ruin the footage.

So considering a new camera for an upcoming holiday. I have an old Radcam and an old circa 2011 GoPro. Is there anything new to the market that is a better proposition?

It will be an open top car so external mic is a must so that wind noise doesnt ruin the footage.

I'm happy with my Drift Ghost HD.

its on the larger side, but works flawlessly when tied to the android/iphone app, has external mic output while still being water/splash proof.

roll-bar mount, extra battery, external mic and a hard case didnt set me back too much. Camzilla stock all the gear you need.

What is the audio like? That is whats most important to me...

I think the Hero 3+ is the way to go , just need to confirm the quality of the external mic

The HD Ghost quality is good. a bit quiet, but means it doesnt distort. However it does get wind noise.

The external mic doesnt get much wind noise, but is louder hence distorts etc.

here is a poorly compressed vid I took with it.

how are people mounting their cameras?

I have a suction mount and a roll-bar mount, but my harness bar is too low to see over the dash.

2 events ive been to now, the scrutineers have asked for a lanyard to be attached to the camera in case it comes off the mount. I was thinking of just using cable ties and wedging in a closed window or making a velcro strap or sorts.

any ideas?

My last event was just using a cheap suction mount on the windscreen, I have a RAM mount for outside of the car, but need one more piece for it.

Roll bar would be awesome also, but I'd be using one of the diagonals as harness bar is too low.

Nothing has been said to me about extra tethers, but it makes sense. Surely cable tie would be enough.

any ideas?

Mount after scrutineering :-)

Otherwise depends, I have camera tethers I can loop round objects but I mount on the front bar and harness bar(with extension for extra height), sometimes behind the rear view mirror via those 3m gopro mounts.

I've got Camzilla suction cup and roll cage mounts, one long and one short arm. You can chain the arms together as well. Would solve the problem of the harness bar being too for the camera to see over the dash. They're very good quality and not expensive.

And I use a thin plastic coated wire (from Bunnings) and U clamps when the camera is mounted externally. One end looped around the arm of my Camzilla mount, run the wire through the window and loop that end around a grab handle. Only takes a minute to put it on.

Edited by hrd-hr30

Does anyone want this Ram Mount for an iPhone 4/4S?

Part number: RAM-HOL-AP9
This is just the phone mount, you need the rest of the mount to go with it.
Brand new, removed from pack and test fitted, ended up going a different way (for in car lap timing).
Going cheap, can post.

RAM-HOL-AP9U1.jpg
  • 7 months later...

What's the latest thinking for in car video? I've got a track day on the 31st Jan and I'd like to get some footage. Latest GoPro is a HERO4 Black which is pricey considering the extras you have to buy. Unsure of other options.

Be good to get your thoughts.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...