Jump to content
SAU Community

Recommended Posts

When I took off I heard this voice say "your shifting to early wind the gears out"

Wonder who put that in my head was huh Jez

I admit it im a bad influence. But i am a good teacher, atleast u know when to change gears now u pussy :P

I admit it im a bad influence. But i am a good teacher, atleast u know when to change gears now u pussy :P

When it stops making power? hahaha at 300rwkw, I stop changing gears by the RPM, kinda have to play it by ear....literally. Far too focussed on the road.

When it stops making power? hahaha at 300rwkw, I stop changing gears by the RPM, kinda have to play it by ear....literally. Far too focussed on the road.

He was changing at 5500 or some pussy rpm

I admit it im a bad influence...

Not really, I remember when u were tuning my car u kept telling me to take it easy n slow down as i was revving the sh** outa all gears so u cud tune the upper rpm points too.. Ur kinda good influence I reckon..

Docile every-day driving I usually change around 4000rpm, but the few select sections in this every day driving I give it what for as I would on a weekend - ~7000rpm shifts, not letting revs drop below 3500. hahaha though this is rare :(

Docile every-day driving I usually change around 2000rpm, but the few select sections in this every day driving I give it what for as I would on a weekend - ~2500rpm shifts, :(

because Diesel Van

Not really, I remember when u were tuning my car u kept telling me to take it easy n slow down as i was revving the sh** outa all gears so u cud tune the upper rpm points too.. Ur kinda good influence I reckon..

Sohardcore.jpg

Yeh the ss turbo's build boost faster but can't seem to hold it as well uptop. I had one of staos wastegate mods on initially but the boost wouldn't go below 20+ psi...

I'll wait for Jez to post the overlay graphs, but IMO the SS1PU comes on faster and has a better top end. Maybe you're thinking of the SS1?

I'll wait for Jez to post the overlay graphs, but IMO the SS1PU comes on faster and has a better top end. Maybe you're thinking of the SS1?

I wasnt really expecting to get a result similar to an ss1pu, they are like $700 more and are a superior turbo. You would expect them to outperform a standard hi flow easily.

Im happy with the result, but if I ever get over this setup (highly doubt I will for a while) theres always the option to sell up and go bigger with something like gtx3076 later on if I wanna chase a larger number.

Edited by Mitcho_7

Haha ur a hoon

Had to chime in Jez, pot calling the kettle black anyone.............. :) :)

You've driven my car so I have first hand experience lol ;)

Ive never seen my semis so "ungrippy" heheheheee

because Diesel Van

hahaha yes :P though I'd say about 500rpm more than what you suggested. 2nd - 5th are all pretty long gears, and I've found there's really no need to wind it past 3000rpm in any gear.

Had to chime in Jez, pot calling the kettle black anyone.............. :) :)

You've driven my car so I have first hand experience lol ;)

Ive never seen my semis so "ungrippy" heheheheee

Lmao Dave i have no idea what u mean :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...