Jump to content
SAU Community

Recommended Posts

For a track car I would go for a turbo that gives you a broader area under the graph, not just outright power..

SS2 would be a perfect choice, gated & on happy juice

For a track car I would go for a turbo that gives you a broader area under the graph, not just outright power..

SS2 would be a perfect choice, gated & on happy juice

The set up will be externally gated...

Yer gives me something to think about. have to pull the trigger and make a decision soon tho....

Pretty much if you know your going to settle for 360kw then might aswell go for ss2 and gain the response but if you want more or are unsure if you will want/need more then upsize.

How much power are you making Manuel? I saw how hard your car bakes, can you give a quick rundown of power/mods?

?

343kw at 18 psi on e85. Mods are ss2 turbo, brae manifold,50mm gate, and then the usual bolt ons like pump injectors pfc etc. stock engine apart from tomei poncams.

How much power are you making Manuel? I saw how hard your car bakes, can you give a quick rundown of power/mods?

?

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/page-463

Thanks for that!

The external gate adapter (for lack of a better word) plate thingy that you provide stao, is it 3" V-Band outlet?

If not can I buy a Kando GT3076 .82 rear housing and put it straight on?

Thanks.

They can be made to a vband, usually is a plate to weld a dump pipe to. My turbine is larger and has different radious to 3076 so if you are supplying the housing, i will need to remachine it.

Car was tuned today!

I bought a blown R34 OP6 turbo off eBay specifically for Stao to do a highflow on. I chose the larger turbine mainly for the extra ~30kw it produces over the 21U housing. It is 500rpm laggier than the standard R33 highflow, according to Stao.

Firstly, installation was pretty straightforward. Both coolant lines had to be tweaked slightly to suit the new CHRA, but the oil feed and return were both direct bolt-ons. Obviously intake and dump pipes are exactly the same as standard.

Basic Specs:

1996 R33 S2

Unopened engine, 104,000km. New timing belt, water pump.

HyperGear OP6 highflow.

Nismo 555's

Z32 AFM

R33 GT-R fuel pump with +12v direct re-wire.

Scotty's intake pipe, A3 POD filter (for now).

JJR Return flow FMIC

JJR Dump to Venom Cat to Apexi N1

BP98

Glamour:

2m5hsid.jpg

And the dyno result:

k4v2mw.jpg

Current tune is red, overlaid on the previous tune, which was stock turbo, injectors and AFM @ 11psi.

Verdict: Car feels a lot less punchy under 3000rpm, which I expected. Turbo comes on song at around 3,800, with full boost of 19psi at 4000rpm. It hits hard and fast, where as before with the stock turbo it would feel quite weak in the upper region of the tach. Very happy with the power, and it is still very driveable around town, just less aggressive down low. Fuel economy TBA :P Might go e85 later down the track.

Big thanks to Stao and Trent for their awesome work :thumbsup::D

Edited by colourclassic

Nice result, did you have any issues with the jjr dump? I'm doing the same mods, but found the dump has a 10mm step at the bottom, (ie needs opening up to prevent a restriction)

Looks like there isn't enough meat on the flange to die grind, so will have to crack ze welder out and fix up.

Nice result, did you have any issues with the jjr dump? I'm doing the same mods, but found the dump has a 10mm step at the bottom, (ie needs opening up to prevent a restriction)

Looks like there isn't enough meat on the flange to die grind, so will have to crack ze welder out and fix up.

I've got the ATR43SS2 (i.e. not a high flow) and it works well with my slightly tweaked JJR dump. However the IWG part of the housing is probably a bit different to the OP6.

Here's a post on shaving the JJR flange, not sure if that helps: http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/?p=6590457

Nice result, did you have any issues with the jjr dump? I'm doing the same mods, but found the dump has a 10mm step at the bottom, (ie needs opening up to prevent a restriction)

Looks like there isn't enough meat on the flange to die grind, so will have to crack ze welder out and fix up.

I ported/die grinded mine ;)

Car was tuned today!

I bought a blown R34 OP6 turbo off eBay specifically for Stao to do a highflow on. I chose the larger turbine mainly for the extra ~30kw it produces over the 21U housing. It is 500rpm laggier than the standard R33 highflow, according to Stao.

Firstly, installation was pretty straightforward. Both coolant lines had to be tweaked slightly to suit the new CHRA, but the oil feed and return were both direct bolt-ons. Obviously intake and dump pipes are exactly the same as standard.

Basic Specs:

1996 R33 S2

Unopened engine, 104,000km. New timing belt, water pump.

HyperGear OP6 highflow.

Nismo 555's

Z32 AFM

R33 GT-R fuel pump with +12v direct re-wire.

Scotty's intake pipe, A3 POD filter (for now).

JJR Return flow FMIC

JJR Dump to Venom Cat to Apexi N1

BP98

And the dyno result:

k4v2mw.jpg

Current tune is red, overlaid on the previous tune, which was stock turbo, injectors and AFM @ 11psi.

Verdict: Car feels a lot less punchy under 3000rpm, which I expected. Turbo comes on song at around 3,800, with full boost of 19psi at 4000rpm. It hits hard and fast, where as before with the stock turbo it would feel quite weak in the upper region of the tach. Very happy with the power, and it is still very driveable around town, just less aggressive down low. Fuel economy TBA :P Might go e85 later down the track.

Big thanks to Stao and Trent for their awesome work :thumbsup::D

Thanks for sharing. This is an excellent result. I'm very happy with how the new wheel configurations performed. Even on a R33 Rb25det it still managed to hold very steady power and torque in upper rev rang, which usually dips after 6500 on stock manifold internally gate.

I have one more results form a recent customer, with a OP6 high flow based on a R34 GTT. Which managed similar result of 271rwkws on pump at 18psi:

271rwkw.jpg

I've been working on few new turbos for the time been. photos and results will be posted shortly.

With JJR dumps they need go through some serious die-grinding, they are then good to use.

I found JJR's return flow coolers get hot pretty easily, while plazamaman, PWR and most of Jap brands stays cool for much longer. Might be the next upgrade to try on.

Thanks for sharing. This is an excellent result. I'm very happy with how the new wheel configurations performed. Even on a R33 Rb25det it still managed to hold very steady power and torque in upper rev rang, which usually dips after 6500 on stock manifold internally gate.

Trent mentioned how impressed he was with the boost curve, it locks on to 19psi and holds it well all the way through. That's with a basic TurboTech MBC too.

Racked up about 80km tonight around Melbourne - gotta say I'm pretty over the moon with how this car performs now.

I believe that to be a great result. Be sure to report back with drag results if you ever go.

I'm keen to go soon and find out!

Yeah my dump needs a lot of work, I'll sort it though. The little rb20 is going to need every bit of help running a op6 high flow, lol

I found it pretty fun porting mine. I just laid the OEM Nissan gasket on and traced with sharpie what needed cleaning up. Make sure you get a nice smooth transition and don't penetrate into the welds and you'll be all good.

Edited by colourclassic

Wow epic result and sex wheels, mind sharing size and offset?

I've been a lazy prick with my car, I'm picking up a new ECU tomorrow and I'll start tuning soon.

I don't think anyone has configured their SS2 like mine yet so it should be fun to find out what it does.

Will share results and timing maps once I start.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...