Jump to content
SAU Community

Recommended Posts

I have a mate who's drift car (with RB30/26DET) puts out 450 rwkw through a HDi intercooler. So sure you can force the air through the china cores to make reasonable power... but it begs the question, how much extra power would it make with a decent cooler? At the same time the tune would probably be safer due to lower intake temps.

Edited by Ryno

has any body tried water spray to increase core cooling? I've seen this make good power difference in the dyno.

I have a mate with a R33 GTS-t with water spray hooked to his IAT sensor.. smart, but you need to always refill it on the track and 1x 2L washer jet bottle doesn't last a full session on the track.

So better to get a more efficient core to start with.

Hopefully when funds permit next year, I will be going straight up to a 100mm Plazmaman core.

has any body tried water spray to increase core cooling? I've seen this make good power difference in the dyno.

I built a system using the Autospeed intelligent water spray controller (which is actually a very clever piece of kit and worth the money) a largish water bottle from a Cordia and a good Bosch windscreen washer pump from a Commodore. Plus a very good atomiser from Spraying Systems. I installed that on my original R32 sidemount. Running the RB20 at 14 psi was enough to make the sidemount marginal - it would heat soak if you drove the car hard. The water spray did an excellent job of keeping the cooler's temp down, and the spray controller made very parsimonious use of the water, so the bottle lasted weeks of street driving. This was all pants-dyno stuff, so not particularly scientific.

When I upgraded to a front mount I could not tell the difference between having the spray working or not, so clearly the cooler was good enough on its own. So I took it all off the car.

if anyone wants my scotty_nm35 intake it's for sale with all silicone joiners/reducers to fit either stock airbox -> hypergear SS2/G3 turbos or pod..

For Sale thread & Photos:

http://www.sau.com.au/forums/topic/461780-fs-syd-r32-r33-scotty-nm35-alloy-intake-pipe-with-4-3-silicon-reducer-good-for-low-mounthypergear-setup-pod/

No point

a small wmi jet works much better..

and i bet anything you would like ..using a china core with wi is better than a expensive core heatsoak wise aswell. Was cheap aswell when dollar was good

cheers

darren

No point

a small wmi jet works much better..

and i bet anything you would like ..using a china core with wi is better than a expensive core heatsoak wise aswell. Was cheap aswell when dollar was good

cheers

darren

I'm on E85, so doesn't "really" make a difference in terms of knock.. but because it's not as cold means you make less power and also I have an IAT table that corrects the injection table so it doesn't run rich as crap.

I'm happy to spend my money where it's needed and happy to get rid of my China Racing products (sound racist, but I'm half chongers myself hahahaa)

  • Like 1

Im using a plazmaman 76mm core on custom returnflow piping... not hitting any restrictions caused by it as of yet 324kw running 16psi on flex e70... maxed out injectors stopped me running more boost or 284kw 18psi on 98

No point

a small wmi jet works much better..

Was cheap aswell when dollar was good

Not anymore unfortunately. I want another kit to put on the diesel family wagon but not with today's prices.

Best work as a twin, can use two ATR43SS2s, similar to Chequrered tuning's 650rwkws setup. If it has to go Single ATR46 is fine working with two 45mm gates.

another quick question.

Can the ATR45 be supplied with braided lines to suit rather than attempting to make the standard lines fit?

+ pricing

I would also be interested to know - I guess it would be just as easy to get the earls kit though or get custom lines made.

Will wait for Stao's response.

  • Like 1

ATR45SAT comes with braided oil feeding line and uses OEM oil drain. Including the manifold spacer this turbocharger is $1350 inc GST internally gated.

The water lines you can use Earles kits for around $130 from Pirtek. Or you can use push on hoses and fittings, which comes to around $40.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...