Jump to content
SAU Community

Recommended Posts

Straight up convert to top feed, use 1/2 height injectors that are stainless. The Bosch 1150cc (at 4 bar) are unmodified. Just don't use the bottom collar. These injectors are commonly referred to as Seadoo Injectors. At 3bar they're 980cc.

Or get a set of Siemens DEKA V 80lb (~875cc) short stainless injectors and a normal top feed rail. All you need to do is trim the spacers to suit. Will fit snug underneath the stock plenum too and provide you years of endless joy.

  • 2 weeks later...

My personal best was 320rwkws on E85 fuel. This car actually made more power. Looks like its got FFP, cooler and exhaust plus fuel and ecu. It might have cams as the power curve lookes like it has no active vct. 

Are there any results for the ATR45SS on an RB? I'm tossing up between the ATR45 CBB and ATR45SS CBB. Tao what would be the expected difference in lag and power be between the two? Both external gate on a proper manifold on a 30DET.

Hi, Rb30det is different to Rb25det, its heaps more responsive. Both ATR45 and ATR45SS works fine depending on how much power u r chasing for. I've personally used an 700HP ATR45SAT in a 2JZGTE no VVTI, the end result would be very similar to a Rb30det.  Car made 406rwkws @ 20psi on P98 fuel, full boost by by 4000RPM.  So what sort of power r u chasing for and will the car be running on E85 or P98?

Hi Tao,

I should add I have an ATR45 CBB 0.82 on an RB30DET (different car and engine) and have been happy with it so I know what to expect from an ATR45, just curious what the difference would be with the billet compressor. Power goals are 450 give or take 20-30 so I know both turbos are in that ballpark. Will be flex tuned on E85 in a Stagea and keeping VCT.

For 450rwkws ATR45SS-1 with 63mm billet wheel will do. Next size can do 520rwkws+ on E85 they works extremely well with XR6 BA/FA, but would be considerably laggier working with a 3L.

  • Like 1

Based on that would it be fair to expect that the SS-1 would give 20-30kw more than a normal ATR45 at the expense of 2-300rpm response? I'm just trying to figure out how it would compare to my other 30DET.

The ATR45SS-1 I'm pretty happy with and I would run that on Rb25det with a smaller rear end. when tested on the 2JZ, The response is almost identical to the normal ATR45  that made 30kws more. This particular comp wheel works with a normal ATR45 turbine.  

  • 2 weeks later...

Great result to share from Garage 7 tuned Rb25det Neo powered S14 running using one of our TD06SL205 turbochargers. This is an custom built turbo based in a TD06 rear end, externally gated.

Car has: 1000cc Injectors, Link ECU G4+ Storm Flex Fuel and usual supporting mods. 
Peek power made: 308rwkw on 98 and 378rwkw on E85.

Fabrications done by: Vulcan Performance and Fabrication

Dynoed and Tuned by: Garage 7

FFP modifications done by: NDR Fab Precision Race Fabrication

Car owned by: Matt G

fronts.jpg

carondyno.jpg

power.jpg

 

 

Sorry if a bit OT .

I was under the impression that this was a fail on RB25 plenums - or at least R33 spec ones .

Tao I'd like to hear your opinion on this one as I took your advice and fitted your preferred intercooler with a Just Jap over the fan pipe kit . It would be good to use a bend and throttle mounted on the plenum if it can be made to work properly .

Thanks in advance , cheers Adrian .

Plenty have done it and plenty say it's fine.  Many of those engines may have died, and you wouldn't hear about it if the plenum distribution was to blame because then the person who claimed it was fine would have proven themselves wrong.

But....I must stress, I don't know that it's not fine.  I only have very strong suspicion that it's not, because those plenums are not set up to receive air for all 6 cylinders from the front end.  The internal shapes are set up to receive it from the side.  I'm enough of an aerodynamicist to be very leery of that.  And I have never seen anyone report on 6x EGT probe results showing that it is fine.  On that basis, I simply wouldn't do it.  I'd be less worried about the various large plenums that bolt onto the bottom half, because at least they are simply big arse volumes on top of the runners, with no odd internal shapes to interfere.

  • Like 1

Hi, the Car's running 22psi to produce results above. 

With that FFP modifications,  one of my tuners did mention it feeds CYC 5 and 6 more air then the rest causing them to run lean. I don't have personal experiences with them, so I can't comment.   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...