Jump to content
SAU Community

Recommended Posts

Thanks mate, thats exactly the info im after.

It is a 25. i will go ahead with the original plan then but a g3 then

 

how does a G3 compare to SS2? im not sure what the name of the profile actually mean. as you said its a little confusing on the site.

5 hours ago, Sir Lord Van Von Vader'ham said:

Thanks mate, thats exactly the info im after.

It is a 25. i will go ahead with the original plan then but a g3 then

 

how does a G3 compare to SS2? im not sure what the name of the profile actually mean. as you said its a little confusing on the site.

ATR43SS2 is a brand new turbo that is capable of making more power.  Ball bearing option is highly recommended. It is also highly recommended  working  with our externally gated turbine housing kit. 

Regarding to Rb20det highflows or builds from earlier discussion, they runs a smaller turbine and and compressor then a RB25det turbos. Can build it into a OP6 it would work similar to a HKS2530 with a modern wheel set for more power. Its not a bad choice. 

Sharing another result. This is an ATR43SS2 on Pump 98 fuel making a pretty responsive 355rwkws @ 20psi. 

R34 GTT Rb25det Neo standard engine
ARP head studs
HyperGear ATR43SS-2 ball bearing turbocharger
6 boost high mount exhaust manifold
50mm external gate
4 inches intake pipe
600x300x71mm front mount intercooler
3.5 inches turbo back exhaust
1000cc ID injectors
Haltec ECU
Tuned by Chequered tuning Melbourne
Final result of 355rwkws on pump 98 fuel / Ron 93 at 20psi, hitting 220rwkws @ 4000RPM.

enginebay.thumb.jpg.df67fff9ed38998b39136cb18e341882.jpg

power.thumb.jpg.b4662f1cb7ed1c0a05276ef8d37853d2.jpg

boost.thumb.jpg.410d3a9bf58c1c5ccc822dbd97a9b31e.jpg

 

Edited by hypergear
  • Like 1
  • 1 month later...

Sharing a pretty interesting result from a Rb20DET with Rb25det Neo Vct cams. Turbo's one of our ATR43-G2 BB model for RB20det in T3 .63 rear housing. Car managed to pull a pretty responsive 321rwkws on E85 fuel externally gated.

 Engine's in a Ford AU :D. Pretty interesting eposide to watch:

 

IMG_20230412_160311.thumb.jpg.e63a06a33c04ae85089696f815c35132.jpg

image.thumb.jpeg.2593531c087101d0611e9e4956c1d084.jpeg

IMG_20230412_162712.thumb.jpg.4ad962ee970d6c898ea091f6a125983a.jpg

carondyno.thumb.jpg.f7b7db2c53380df60b2bd6b53bbcfb65.jpg

rb20G2321rwkw.thumb.jpg.fa45565d7551a1394403c1bdbbc63672.jpg

 

  • 2 weeks later...

Updating result from latest model ATR43SS-3 Turbocharger:

Keepitreet R33 GTST 4 door
Rb25det Neo engine
Forged pistons and con-rod
Ross performance trigger kit
1650cc Bosch fuel injectors
Two 460L fuel pumps
Adaptronic plugin ECU
Upgraded Valve springs
Hypergear ATR43SS-3 Turbocharger
6 boost high mount TS exhaust manifold
Twin turbosmart 50mm external gates
Tuned at Chequeredtuning Victoria
Car made a final result of 482rwkws @ 24psi. Hitting 280rwkws @ 4000RPM with wide spread of power band and plenty of area under curve.

carfront.thumb.jpg.bed02d93780c3e4f276d0ccc54be79b5.jpg

carondyno.thumb.jpg.2b9cfa55277f082668765fc6c48d0354.jpg

IMG_20230427_152521.thumb.jpg.ff1196d63464de416fb78d1209ec6b29.jpg

power.thumb.jpg.cec5223a82794e5cafcde817a53f0ab5.jpg

boost.thumb.jpg.06928138fe196b0f5df9ddfd6e63cb4b.jpg

carrear.thumb.jpg.4610da34daab676bee58bee99c937379.jpg

 

  • Like 1
  • 3 weeks later...

Updating this thread as some of yous would have seen on FB. Not about turbos this time, but a piece of information for people seeking the Rb2530det rout.  

I've attached results of my built Rb25det with Kelford cams Vs my built Rb30det with HKS cams, making it a reasonable comparison of what Rb25det Vs Rb30det is like. Both engines had identical setups, E85 fuel, made the same power, while the Rb30det was 1300RPM better in response, more power every where and 137Mn of extra torque.

I’ve also attached result of differences HKS cams made in comparison to stock Rb25det cams on the Rb2530det engine.

rb25det463rwkwlabeled.thumb.jpg.188288000b11bb4dab95186356c1dcf9.jpg

rb25det463rwkwboostlabeled.thumb.jpg.d1c9e2f4b4e46312e271d87d6f55a1e7.jpg

powerlabeled.thumb.jpg.63e910cef1ed2f5a811ed36a7271bbd7.jpg

boostlabeled.thumb.jpg.b5c90f68109d918b8d34a62a950b5dd1.jpg

comparison.thumb.jpg.92dadf1c66b8ca59af43a1b1d26285f1.jpg

IMG_20230611_161930.jpg

  • Like 6
7 hours ago, hypergear said:

Updating this thread as some of yous would have seen on FB. Not about turbos this time, but a piece of information for people seeking the Rb2530det rout.

Thank you for posting here as well Tao! I'm not following social media so I very much appreciate it.

Though in some ways I'm not sure if it is good that you keep posting these promising results :D You are the voice of temptation.

thinking_about.thumb.jpg.e1ab14169ae03936c11641d9a8930c77.jpg

 

  • 2 weeks later...

Sharing a pretty good Pump 98 result:

R33 GTST forged rb25et engine
Standard head and cams
ARP head studs
Supertech valve springs kit
HyperGear ATR43SS-2 ball bearing turbocharger
6 boost high mount exhaust manifold
50mm external gate
4 inches intake pipe
600x300x71mm front mount intercooler
3.5 inches turbo back exhaust
1000cc ID injectors
Link ECU
Final result of 372rwkws at 25psi.

 

atr43ss2372rwkwsp98.jpg

Update on my Rb2530det R33 GTST project, Now sitting at 497rwkws. 

Engine Specs: 
Rb25det head with forged Rb30det bottom
Forged pistons and con-rod
Upgraded Valve springs
HKS step 1, 256/ 264 drop in cams

Fuel system: 
1650cc Bosch fuel injectors
Two 460L fuel pumps

ECU: 
Haltech ECU

Turbo side: 
Hypergear ATR43SS-3 ProR Turbocharger
6 boost high mount TS exhaust manifold
Turbosmart 50mm external gates

Hub Dyno Tune: Chequeredtuning Victoria

Car made a responsive 497rwkws @ 25psi full boost by 3500RPM. Hitting 150rwkws @ 3000RPM and 340rwkws @ 4000RPM, with wide spread of power band and plenty of area under curve.

power.thumb.jpg.6fc4f8e6298901c5c5b4fa26adbbe1d4.jpg

boost.thumb.jpg.6f66c6edefc2f3ee6f340b9ee8123094.jpg

dynoside2.thumb.jpg.99a77ed67d6228371d82b863267d6404.jpg

IMG_20230309_151305.thumb.jpg.f458771e7774b66ec14f82d76557aeef.jpg

 

Edited by hypergear
  • 3 weeks later...
Updating result:
 
R33’s back at Chequered tuning for with another of my in-house built specials. Car had no other changes apart from the turbocharger, we managed to get:
 
516rwkws @ 26psi
569rwkws @ 29psi
606rwkws @ 30psi
642rwkws @ 34psi
 
Turbo’s holding boost with pretty consistent gain per additional PSI of pressure is added. Unfortunately my 3 bars Haltech Map sensor (vacuum is a bar) was very maxed, be back on the dyno to max out this turbo once new sensor arrives. Pretty successful day over all.
 
enginebay.thumb.jpg.0e960c0159f4487d1fc0f5b633328d1d.jpg
 
20230720_174106144_001.thumb.jpg.8a7ef5c6cb0e16f6150d6d4357000c3e.jpg
 
20230720_174106144_002.thumb.jpg.caee0e8d4c7b95895cbe68d29c1fabce.jpg
 
 
  • Like 1
  • 1 month later...
R33's back on the dyno again for development work, testing an new 6 blade 55mm prototype turbine. Using ATR43SS3ProR turbo for back to back test. New turbine shown a slightly laggier curve, but picked up 16kws on same boost pressure with smoother mid / top range power and torque band. 
 
Final run of 509 rwkws @ 25psi

Engine Specs: 
Rb25det head with forged Rb30det bottom
Forged pistons and con-rod
Upgraded Valve springs
HKS step 1, 256/ 264 drop in cams

Fuel system: 
1650cc Bosch fuel injectors
Two 460L fuel pumps

ECU: 
Haltech ECU

Turbo side: 
Hypergear ATR43SS-3 ProR Turbocharger
6 boost high mount exhaust manifold
Turbosmart 50mm external gates

Hub Dyno Tune: Chequeredtuning Victoria

 

caronfrontdoor.thumb.jpg.79ff3ed6216e65c610bd7b5b5609a1c9.jpg

 

power.thumb.jpg.f74cb6eec2a6d2504869ac31fcacc9de.jpg

 

boost.thumb.jpg.205c4710cc451a63028c187c3931911f.jpg

 

 

  • Like 1

What RB wet dreams are made of, comes on super early and makes a great amount of power.

Would be an excellent powerband for a circuit car.

  • Like 1
  • 2 weeks later...

Updating result, This is from our latest ATR45SS-3 model, Its made for 100bhp applications. Same car as above. It managed to pull 636rwkws at 34psi.  Drive ability wise, car hits 300rwkws by 4K and 450rwkws with 1014Mn of torque by 4250 RPM. Pretty good to drive with crazy amount of mid range torque.

Run against ATR43SS-3ProR turbo from earlier.

power.thumb.jpg.8d1a639944b6a299f81de9331d04077d.jpg

boost.thumb.jpg.8543f237b7b23533e072ceac7b9986b6.jpg

 

 

  

  • Like 3

hey guys

so i wana make 250-260kw atw on my rb25det, would the g2 be capable of making that power goal or do i need the g3? just kinda confused because on the site it says its capable of 350hp but doesn't say if its meant for an rb20 or if its suitable to make 350 on an rb25.

ill be running 550cc side feeds, a walbro 460, frontmount IC and all the other stuff necessary

cheers  

21 hours ago, Desean Strickland said:

hey guys

so i wana make 250-260kw atw on my rb25det, would the g2 be capable of making that power goal or do i need the g3? just kinda confused because on the site it says its capable of 350hp but doesn't say if its meant for an rb20 or if its suitable to make 350 on an rb25.

ill be running 550cc side feeds, a walbro 460, frontmount IC and all the other stuff necessary

cheers  

Hi, G3 profile with Rb25det turbo housings will be fine for around 270rwkws on Pump 98 fuel internally gated. I can supply donor housings if interested. To make the power you will need 3 inches metal induction pipe, 600x300x100mm front mount cooler, at least 3 inches turbo back exhaust, programmable ecu, along with injectors, fuel pump, you've got. 

  • Like 1
  • 2 weeks later...
On 24/09/2023 at 12:06 PM, 33GTRV said:

Stao, 

Just managed to get my hands on a GTI-R pulsar. I want a snappy 400 awhp, on stock stroke. Will do camshafts if required. What do you recommend?

 

Hi, on E85 fuel and internal gate, 54mm ATR28SS15 in T2 .64 rear housing will do nicely. I've used BC Step 2 (272dur /12mm) on SR20det for 300rwkws+ applications

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...