Jump to content
SAU Community

Recommended Posts

Well i've been told to make a build thread by damo (djrift)

I've been club racing my R32 GT-R for the past 3 years, and got it to the point where the car was too fast for club racing. It's a neat road car, so I didn't want to buture it with a cage and what not, and more to the point I don't have wads of cash to throw at it.

So after talking to some people before Targa I decided to get a gtst to race in the Tas Super Series. Then I cracked the shits after Targa (for more reasons than the crashes, but I won't go into that), and decided to build it in line with the Targa rules, with the plan to set the car up, and learn it in the Tas Super Series next year, and enter Targa in 2011.

I was lucky enough to find a car locally with no engine and gearbox, the chassis rails are straight as, and the only rust was under the rear pods. The guy was going to build it into a race car, but decided after pulling it into 1000 peices that he wanted to get rid of it. So a few weeks ago Dad, Damo and I went and picked the car up. We filled my car, Dads car, and the skyline with the parts. Damo said he was keen to help, so we'll be spending the next 6 months building it

Got the car to Dad's and put it in his back yard, while he cleared a hole in the garrage. While he did that i got a cheap GT-R bonnet, front bar, boot, and rear wing. And sold the gtst bonnt off.

gallery_5985_3354_1746306.jpg

gallery_5985_3354_59952.jpg

gallery_5985_3354_671262.jpg

awaiting a dirty cheap rb20

gallery_5985_3354_1563639.jpg

GT-R bonnet on.

gallery_5985_3354_2244003.jpg

Horay...finally in the garage on the hoist

gallery_5985_3354_382212.jpg

still full of crap

gallery_5985_3354_1319223.jpg

wheel has seen better days

gallery_5985_3354_291548.jpg

gallery_5985_3354_1328825.jpg

previous owner has removed a lard chunk of the tar :P

gallery_5985_3354_1765405.jpg

gallery_5985_3354_1740519.jpg

gallery_5985_3354_538577.jpg

still left me with some to clean up.

gallery_5985_3354_1283878.jpg

gallery_5985_3354_639008.jpg

ta da

gallery_5985_3354_129475.jpg

gallery_5985_3354_403975.jpg

removing the wiring loom

gallery_5985_3354_939179.jpg

gallery_5985_3354_1477865.jpg

full loom out, and ready to be chopped up.

gallery_5985_3354_932118.jpg

more sound deadener, this weighed 5.5kg....and hid more tar

gallery_5985_3354_258914.jpg

fan, heater, ac, and pedels removed to get the deadener out.

gallery_5985_3354_822287.jpg

horay...more tar

gallery_5985_3354_763384.jpg

passengers side done :) just the center and drivers side to go.

gallery_5985_3354_1875591.jpg

i'm planning to get a bond weld-in kit now.

Edited by sav man
Link to comment
https://www.sau.com.au/forums/topic/278029-bens-r32-gtst-build/
Share on other sites

Hoorar the ball is rolling as we all know you cant actually build a race car without a build thread. they just never get finished other wise.

i think you forgot to thank damo for being such a grate bloke. then for finding a Grate Gtst for you and also letting you work on his Gtst to show you how much more fun they are to work on than GTRs.

many fun times will be soon had on this car and hopefully ben will keep the pics flowing.

Benny, let me know if you want my fully hectic Apexi N1 coil overs for the circuit.

Otherwise, I too am interested to know what you're thinking susp wise? Interested in joining me in a bulk buy (well, two of us :down:) of some Murray Coote stuff?

The minimum wieght for Targa is about 1180kg from memory (factory -10%). So I'm planning to get as close to that as I can, so i'm cutting away everything i can, unfortinatuly my car is a 1992 model, and has the side intrusion, so i'm working how to cut that out. I'm likeing the look of some Buddy Club P1 QF wheels, as they are light as. GT-R lighter bits here and there, there are a few rusting GT-R's being wrecked in tassie ATM, and alloy dosn't rust :down:

Suspention will probably consist of GT-R sway bars. I'm planning to put pretty good shocks in the car, tossing up between, Bilsein PSS9's, Penske 8300's, and MCA's at this stage. I've run revalved Bilsteins in the GT-R for the pas 3 years. But the setup is a compremise between wet and dry, the shocks can handle a varity of spring rates. But you can really change springs between stages if it starts to rain. Drummonds don't seem to be that durable, I've spoken to a few people this year that have had seizing, and over heating problems with them. I'm not in a hurry to spen money there, going to do lots of research before I hand my money over.

Since I live 20mins from Symmons, and it only cost me $65 to get on thetrack whenever I want, i'll be able to spent time to learn how to tune the shocks.

Running gear will be stock, with a clutch upgrade, and maybe a GT-R diff center.

The cage will be pretty extensive as it's going to tarmac rally. High and crossed over side intrusion bars. I'd like to extend the cage to the front towers, been looking at Duncans cage to work that out. Not sure what i'm going to do in the rear with the cage yet.

If the Bens end up going Proflex, keep me in the loop. Good things come in threes :)

1180kg? Once i know how much my car owes me body wise i am keen to keep saving and get a carbon tailshaft and PPG gearset. Probably get better value out of that rather then upgrading suspension to Proflex from what i am currently running

If you have a few dollars for an RB20 PM me as i have come up with a pretty good RB20 combo that i am also keen to try when i get back to Aus :P It will be perfect for what you guys are doing.

will be very interested in this build as well :(

my 32 is slowly coming along atm... not going to rip as much weight out as you but looking at having around 260rwkw so that might help me along a bit!!!

do both front and rear r32 gtr swaybars fit?!? i was considering whitelines (i know cusco are lighter and stiffer but im a jew)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...